Measurements of fiber bundle interfacial properties of three-dimensionally reinforced carbon/carbon composites up to 2273 K

Experimental techniques for evaluating the interfacial properties between fiber bundles and the matrix of three-dimensionally reinforced carbon/carbon composites were examined. Specially arranged fiber bundle push-out and pull-out tests were conducted up to 2273 K in vacuum. In these tests, a fiber bundle in the specimens was extruded or pulled out by external compressive or tensile loads. Post-fracture observations revealed that a shear fracture was successfully induced within the carbon matrices at the loaded fiber bundle interface. The interfacial shear strength and initial sliding stress of the fiber bundle monotonically increased with the test temperature. The relief of residual thermal stress and increases in the frictional resistance and anchor effect at the fiber bundle interface were considered to be the major mechanisms that caused the enhancements. An increase in the heat treatment temperature during the processing of the composites resulted in a significant decrease in and .     

Texture and Formation Mechanism of Fibrous Calcium Hydroxyapatite Particles Prepared by Decomposition of Calcium–EDTA Chelates

The texture of fibrous calcium hydroxyapatite (Ca₁₀-(PO₄)₆(OH)₂, CaHAP) particles that were prepared by the decomposition of calcium–ethylenediaminetetraacetic acid (calcium–EDTA) chelates at 100°C under various pH conditions (pH values of 5–10) was investigated by various means. Well-crystallized fibrous CaHAPs were produced at pH .6. The stoichiometry of the CaHAPs with a chemical formula of Ca_{10− x} (HPO₄) _x (PO₄)_{6− x} (OH)_{2− x} (H₂O) _x was improved by increasing the decomposition pH. All the CaHAPs had unit-cell dimensions of a = 0.9436 ± 0.0003 nm and c = 0.6881 ± 0.0006 nm, exhibiting an enlarged a value. The finding of mesoporosity of CaHAPs by nitrogen gas (N₂) adsorption measurement indicated that the CaHAPs were produced by an agglomeration of primary particles. Furthermore, the nonstoichiometric CaHAPs that formed at pH 6 developed ultramicropores, which were accessible to water (H₂O) molecules but not to N₂ molecules, by the elimination of H₂O molecules that were adsorbed in interstices of primary particles in less-orderly crystallized CaHAPs and/or by dehydration of HPO₄²⁻ groups. These findings by gas adsorption techniques could give evidence for the agglomeration mechanism to attain a polycrystalline CaHAP, although they exhibited good crystallinity with large size.     

Molecular mechanisms of epigenetic variation in plants

Natural variation is defined as the phenotypic variation caused by spontaneous mutations. In general, mutations are associated with changes of nucleotide sequence, and many mutations in genes that can cause changes in plant development have been identified. Epigenetic change, which does not involve alteration to the nucleotide sequence, can also cause changes in gene activity by changing the structure of chromatin through DNA methylation or histone modifications. Now there is evidence based on induced or spontaneous mutants that epigenetic changes can cause altering plant phenotypes. Epigenetic changes have occurred frequently in plants, and some are heritable or metastable causing variation in epigenetic status within or between species. Therefore, heritable epigenetic variation as well as genetic variation has the potential to drive natural variation.     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Easy formation process of anatase-TiO2 coating layer strongly bonded to titanium metal surface

Because of the formation of a surface passive film (rutile TiO₂) on its surface layer, titanium metal shows adequate corrosion resistance. As the surface layer (passive film) of titanium metal is very stable, any functionalization of the titanium metal has been generally performed using relatively complicated methods. This is because any direct oxidation of titanium metal only leads to the formation of rutile TiO₂ over the entire temperature range. Chemical reactions using titanium chemicals can easily produce anatase TiO₂ at temperatures of ≤600°C. Using precursors is one of the ways of producing an anatase TiO₂ coating on titanium metal. However, in previous studies, anatase TiO₂ layers easily peeled off when they were used in flowing water. Herein, we describe a simple process for obtaining an anatase TiO₂ coating layer strongly bonded to the titanium metal surface. In our process, titanium metal was pretreated with a reducing agent to create a surface TiH₂ layer, whose condensation reaction easily proceeds with a precursor (composed of oxalic acid and tetra-butoxy titanium). Subsequently, the treated titanium metal was calcinated at 550°C in air to achieve strong bonding between the anatase TiO₂ coating layer and titanium metal surface. The treated titanium metal exhibited excellent photocatalytic activity.     

Mirror Constant for Tyranno® Silicon-Titanium-Carbon-Oxygen Fibers Measured in Situ in a Three-Dimensional Woven Silicon Carbide/Silicon Carbide Composite

The strength, S , of ceramic and glass fibers often can be estimated from fractographic investigation using the fracture mirror radius, r _m, and the relationship S = A _m/( r _m)^1/2, where A _mis the "mirror constant." The present work estimates the value of A _mfor Tyranno^® Si-Ti-C-O fibers in situ in a three-dimensional woven SiC/SiC-based composite to be 2.50 ± 0.09 MPa·m^1/2. This value is within the range of 2–2.51 MPa·m^1/2 previously obtained for nominally similar Nicalon^® Si-C-O fibers.     

Thermal Response and Oxidation of Tyranno™-Fiber-Reinforced Si-Ti-C-O Matrix Composites for a Thermal Protection System in High-Enthalpy Dissociated Air

The thermal response and oxidation of Tyranno™ Lox-M fiber-reinforced Si-Ti-C-O matrix composites in high-enthalpy dissociated air was investigated in an arc jet facility (an arc wind tunnel). The maximum surface temperature reached 1310–1670°C. Catalytic recombination of oxygen and nitrogen on the composite surface under dissociated air was not significant. Surface recession was insignificant below 1600°C surface temperatures and above 5 kPa of oxygen partial pressure at the stagnation point. Passive-to-active oxidation transition of the composite agreed with Balat's theory for monolithic silicon carbide. A glass sealant prevented active oxidation of the composite for short-time exposures.     

A Multiple‐Labeling Strategy for Nonribosomal Peptide Synthetases Using Active‐Site‐Directed Proteomic Probes for Adenylation Domains

Genetic approaches have greatly contributed to our understanding of nonribosomal peptide biosynthetic machinery; however, proteomic investigations are limited. Here, we developed a highly sensitive detection strategy for multidomain nonribosomal peptide synthetases (NRPSs) by using a multiple‐labeling technique with active‐site‐directed probes for adenylation domains. When applied to gramicidin S‐producing and ‐nonproducing strains of Aneurinibacillus migulanus (DSM 5759 and DSM 2895, respectively), the multiple technique sensitively detected an active multidomain NRPS (GrsB) in lysates obtained from the organisms. This functional proteomics method revealed an unknown inactive precursor (or other inactive form) of GrsB in the nonproducing strain. This method provides a new option for the direct detection, functional analysis, and high‐resolution identification of low‐abundance active NRPS enzymes in native proteomic environments.     

Effect of a low-fat diet enriched with oleic acid on postprandial lipemia in patients with type 2 diabetes mellitus

The aim of the present study was to compare the effects of a low-fat diet enriched with oleic acid to those of a low-fat diet enriched with linoleic acid on fasting lipids, postprandial lipemia, and oxidative susceptibility of low-density lipoprotein (LDL) in patients with type 2 diabetes mellitus (DM). In a 3-wk randomized crossover study, eight patients with type 2 DM were given an experimental low-fat diet enriched with either oleic acid or linoleic acid. The oleic-acid-enriched diet contained 5, 15, and 5% energy from saturated, monounsaturated, and polyunsaturated fatty acids, and the linoleic-acid-enriched diet contained 5, 5, and 15% energy from saturated, monounsaturated, and polyunsaturated fatty acids, respectively. In addition to evaluating the fasting lipids and oxidative susceptibility of LDL, we evaluated postprandial lipemia using an oral fat load at the end of each 3-wk dietary phase. There were no significant differences in fasting lipid profile or lag time of LDL oxidation between the two experimental dietary phases. The average and maximal increments of remnant-like particle (RLP) cholesterol levels during oral fat load were significantly higher after the oleic-acid-enriched dietary phase than after the linoleic-acid-enriched dietary phase. The area under the curve of RLP cholesterol was also significantly larger after the oleicacid-enriched dietary phase than after the linoleic-acid-enriched dietary phase. These results suggest that the oleic-acidenriched diet was associated with increased formation of postprandial chylomicron remnants compared with the linoleicacid-enriched diet.     

Microstructure and Magnetic Properties of Metastable RFeO3 (R: Rare‐earth element) Formed from Undercooled Melt

Containerless levitation technique, where the undercooling can be treated as one of the major thermodynamic parameters, was used to study the influence of oxygen partial pressure () on the microstructure and physical properties of rare‐earth orthoferrites RFeO₃ (where R = Rare‐earth element) in the ranges from 10⁵ to 10^?1 Pa. The microstructure of the as‐solidified samples changed into orthorhombic RFeO₃ (o‐RFeO₃), metastable hexagonal RFeO₃ (h‐RFeO₃), and Fe²⁺‐containing RFe₂O₄ and a new metastable R₃Fe₂O₇ phases with decreasing . The effect of on the magnetic properties was indicated as that the saturation magnetization gradually increased for R = La to Yb and decreased for R = Lu with decreasing due to the formation of metastable and magnetic phases such as Fe₃O₄ and Fe.