Capacitance and conductance of ZnxCd1-xS/ZnTeheterojunctions

Capacitance-voltage and conductance-voltage characteristics of RF-sputtered ZnCdS films on ZnTe single crystals are studied as a function of frequency up to 1 MHz. It is found that the measured capacitance decreases with frequency while the conductance increases. A physical circuit model of the junction is proposed to explain this dependence. A relationship relating the junction capacitance to the polycrystalline film properties and the built-in voltage of the junction is derived. It shows that the junction capacitance is related to the average carrier concentration rather than the doping concentration of the polycrystalline material. From a C^-2 versus V plot an average carrier concentration in the films which is in good agreement with that obtained by Hall measurement is obtained. The lower average electron concentration in the ZnCdS film near the substrate is due to either interdiffusion of Cd from the film into substrate or due to higher density of grain boundary states in the starting deposition portion of the film     

Holographic SAR image formation by coherent summation of impulseresponse derivatives

Using the physical optics approximation, the radar image of a target can be constructed from a knowledge of the monostatic backscattered field or hologram for all frequencies and all aspects angles. The target image is the two-dimensional Fourier transform of the hologram. This is based on the same principle as conventional holography. In the near-field the image is computed by the coherent summation of back-projected range responses which are derived from complex impulse responses. Consequently, the image can be interpreted as a tomographic reconstruction. If the target is within the antenna beam at each radar position in the linear synthetic-aperture radar (SAR) geometry, then the algorithm for the coherent summation of impulse response derivatives (IRDs) can be applied. Experimental results for the near-field of a wheat field and a Peugeot 504 automobile are presented to verify the effectiveness of the method     

Enhanced fair earliest due date first scheduling strategy for multimedia applications in LTE downlink framework

Guaranteeing a certain delay threshold for delay‐sensitive applications in long term evolution (LTE) cellular communication system is a very challenging mission. By implementing an optimal scheduling strategy, this mission will be achieved. In this article, a novel scheduler is introduced in order to meet a predefined level of service quality by guaranteeing a specific delay threshold for delay‐sensitive applications in LTE cellular systems. The proposed scheduler assigns the available resource blocks (RBs) to active user equipments (UEs) tacking into consideration several attributes. The expiration date of each packet, the channel quality, the average data rate previously achieved by each UE, and the number of dropped packets for each UE compared with the average number of packets totally dropped are all considered in the proposed scheduler working mechanism. Consequently, the proposed scheduling strategy reduces the number of packets dropped for multimedia applications, and at the same time maximizes the overall throughput of the network. Simulation results are provided to study and evaluate the performance of the proposed scheduling strategy. A comparative study is presented between the proposed strategy and the most recent scheduling techniques. The obtained results prove that the proposed scheduling strategy has considerably acceptable and appreciated results compared with the results of the state‐of‐the‐art scheduling techniques.     

Synthesis and Characterizations of p-Type Kesterite Ag 2 ZnSnS 4 Thin Films Deposited by Spray Pyrolysis

The fabrication of absorber materials based on kesterite materials has attracted considerable attention in recent articles owing to their excellent optical and electrical properties. In this work, we present the synthesis of Ag2ZnSnS4 films with different thicknesses using a cost-effective spray pyrolysis method. X-ray diffraction was used to check the tetragonal phase and the highly oriented nature of the Ag2ZnSnS4 films. Optical data analysis indicates that a direct allowed transition has appeared in the Ag2ZnSnS4 thin films. The optical results reveal that the energy gap decreases from 1.5 eV to 1.23 eV via enlarging the film thickness of the Ag2ZnSnS4 thin films. Moreover, the dispersion parameters obtained via the Wemple–DiDomenico model and the nonlinear optical parameters of the Ag2ZnSnS4 samples were computed and analyzed.     

Effects of Geometrical Discontinuities on Distributed Passive Intermodulation in Printed Lines

This paper presents the results of experimental study of passive intermodulation (PIM) generation in microstrip lines with U-shaped and meandered strips, impedance tapers, and strips with the profiled edges. It is shown that the geometrical discontinuities in printed circuits may have a noticeable impact on distributed PIM generation even when their effect is indiscernible in the linear regime measurements. A consistent interpretation of the observed phenomena has been proposed on the basis of the phase synchronism in the four-wave mixing process. The results of this study reveal new features of PIM production important for the design and characterization of low-PIM microstrip circuits.      

Interference coordination for LTE-Advanced and FM broadcasting interoperability

The surest way to guarantee that multiple wireless systems can concurrently exist harmlessly, when operating in the same or adjacent channel, is by analyzing spectrum overlapping. This paper proposes a more accurate model to evaluate the interference power from co-channel and adjacent channel of orthogonal frequency division multiplexing-based long term evolution-advanced (LTE-Advanced) towards broadcasting frequency modulation systems at 800?MHz. Power spectral density overlapping factor is employed, and closed form of the interference power loss is derived. Numerical results demonstrate that the proposed method evaluates more exact interference power than the advanced minimum coupling loss (A-MCL) method, where the co-channel and adjacent channel interference powers are reduced by 1.3 and 3?dB, correspondingly, compared to that obtained using the A-MCL method. This decreases the minimum separation distance between the two systems, which can eventually lead to efficient radio spectrum resources utilization.     

Structural,electronic and thermodynamic properties of SrxCd1−xO: A first-principles study

First principles calculations have been performed within the framework of density functional theory to investigate the structural, electronic and thermodynamic properties of Sr_xCd_1?xO ternary alloys. The exchange-correlation potential for structural properties was calculated by the standard local density approximation (LDA) and GGA (PBE), a more accurate nonempirical density functional generalized gradient approximation (GGA), as proposed by Wu and Cohen [Physical Review B 73 (2006) 235116], while for electronic properties, the Engel and Vosko GGA (EVGGA) and the modified Becke–Johnson (MBJ) of the exchange-correlation energy and potential, respectively, are used. Deviation of the lattice constants from Vegard's law and bulk modulus from linear concentration dependence (LCD) were observed for the ternary alloys. The MBJ band gaps values agree well with the available experimental results. In addition the thermodynamic stability of the alloys was investigated by calculating the critical temperatures of alloys.     

Silicene Nanoribbons on an Insulating Thin Film

Silicene, a new 2D material has attracted intense research because of the ubiquitous use of silicon in modern technology. However, producing free-standing silicene has proved to be a huge challenge. Until now, silicene could be synthesized only on metal surfaces where it naturally forms strong interactions with the metal substrate that modify its electronic properties. Here, the authors report the first experimental evidence of silicene nanoribbons on an insulating NaCl thin film. This work represents a major breakthrough, for the study of the intrinsic properties of silicene, and by extension to other 2D materials that have so far only been grown on metal surfaces.     

Average and randomized communication complexity

The communication complexity of a two-variable function f(x,y) is the number of information bits two communicators need to exchange to compute f when, initially, each knows only one of the variables. There are several communication-complexity measures corresponding to whether (1) the worst case or average number of bits is considered, (2) computation errors are allowed and (3) randomization is allowed. Tight bounds are provided for the typical behavior of all bounded-error communication-complexity measures of Boolean functions. In the present work, the authors formally define the deterministic model. They describe randomized protocols and compare them to deterministic ones. They both survey previous work and describe original results     

On the design of Robust‐WDM local area networks

Robust wavelength division multiplexing (Robust‐WDM) is a proposal to realize cost‐effective WDM local area networks (LANs) which can get around the expensive need for laser wavelength stabilization. The type of these networks that relies on an access protocol with aperiodic reservations and lenient‐token‐passing based control channel (the AR/LTP protocol) is promising. We look at the deployment of the AR/LTP analytical model in designing this type of network. The model is used to predict the effect of component and network parameters on the waiting time characteristics of the network. An increase in node operation times (i.e. receiver response time, transmitter select time and reservation period) would result in increasing the average waiting time of a connection request, but the waiting time is more sensitive to the physical span of the network and its size. It is also observed that increasing the inter‐reservation threshold may result in little increase in waiting time up to some limit beyond which delay increases rapidly. Copyright © 2001 John Wiley & Sons, Ltd.