Processing Strategy for Producing Highly Anisotropic Silicon Nitride

Silicon nitride with a preferred orientation of large elongated grains was obtained by tape casting of raw powder slurry seeded with rodlike β-Si₃N₄ particles, followed by a gas pressure sintering under 1 MPa nitrogen pressure. The large elongated grains developed from seeds lay in planes parallel to the casting direction in a two-dimensional distribution. Increased fracture toughness (11.1 MPa·m^1/2) and bending strength (1100 MPa) were achieved in the direction perpendicular to the grains alignment compared to specimens with a random distribution of elongated grains. Morover, the specimens exhibited a high Weibull modulus of 46 due to the uniform distribution of large grains.     

High-Strength and High-Fracture-Toughness Ceramics in the Al2O3/LaAl11O18 Systems

Control of microstructure in the Al₂O₃/LaAl₁₁O₁₈ system was performed. Elongated alumina grains were formed by doping with small addition of silica, and 20 vol% lanthana- luminate was formed in situ by the reaction of LaAlO₃- A1₂O₃ in an alumina matrix. Strengths of over 600 MPa and a high fracture toughness (6 MPa.m^1/2) were achieved in the material with both elongated A1₂O₃ grains and LaAl₁₁O₁₈ platelets. Generally antagonistic properties such as strength and fracture toughness have been made compatible in the same ceramic system.     

Synthesis, characterization and crystal structure of a novel thiocyanate–ruthenium(II) complex

The cis-[Ru(dppb)(Me-bipy)(NCS)₂], dppb = 1,4-bis (diphenylphosphino)butane, Me-bipy = 4,4′-dimethyl-2,2′-bipyridine, and NCS = thiocyanate, was synthesized and characterized by spectroscopic and electrochemical techniques and its structure was determined by crystal X-ray analysis. The crystal structure reveals that the coordination geometry around the Ru(II) center is distorted octahedron where two molecules of thiocyanate are bonded to the ruthenium through nitrogen atom in cis orientation. The half-wave formal potential value E_1/2 = 0.8 V (versus Ag/AgCl) observed is considerable higher than that for the cis-[RuCl₂(dppb)(Me-bipy)] complex, E_1/2 = 0.6 V (versus Ag/AgCl), well illustrating the strong π-acceptor effect the NCS ligand toward the backbonding interaction with the Ru(II) metal center. The MLCT absorption bands of the thiocyanate complex present a higher molar absorptivity (about 12%) compared with the cis-[RuCl₂(dppb)(Me-bipy)] complex, in the same experimental conditions. These properties make the complex potentially promising for the photosensitization process.     

Methane Transformation in Presence of Carbon Dioxide on Activated Carbon Supported Nickel–calcium Catalysts

The objective of the present work was to study the catalytic reformation of methane in presence of carbon dioxide on activated carbon-supported nickel and calcium catalysts. Results are very promising ones because they suggests that it is possible to transform methane on these catalysts by using mild reaction conditions.     

Densification and Thermal Conductivity of AIN Doped with Y2O3, CaO, and Li2O

Small amounts of Li₂O result in sintering in the AIN-Y₂O₃-CaO and AIN-CaO systems at firing temperatures <1600°C. The effect is ascribed to reduction of the liquidus temperature. Furthermore, Li₂O is removed by volatization at temperatures from 1300° to 1600°C, and its content decreases several ppm from the initial 0.3 wt%. Li₂O-doped AIN specimens containing Y₂O₃ and CaO additives are well densified by firing at 1600°C for 6 h, and their thermal conductivity is 135 W^.m^−1.K⁻¹.The effect of Li₂O addition on sintering and thermal conductivity also is discussed through thermo-dynamic considerations.     

Ceramic tiling in building façades: Inspection and pathological characterization using an expert system

In this paper a classification system of the anomalies in ceramic tiling applied to building façades and their most probable causes is proposed and a field data analysis is presented.The field work included the observation of 85 ceramic tiling systems in façades via standardized inspections. A statistical analysis of the anomalies observed during these inspections and their most probable causes is presented and the main ceramic tiling anomalies are evaluated for area affected, user disturbance and most probable causes.The interpretation of this data allowed the creation of an inventory of the measures to be implemented in the design, execution and maintenance phases, in order to prevent the occurrence of anomalies, helping the practicing engineer in his daily activity.     

How to study the pharmacology of medicinal plants in underdeveloped countries

This paper presents a reflection based on 15 years' experience of studies on the pharmacology of medicinal plants in an underdeveloped country, Brazil. In these countries the investment in research is small and frequently interrupted. There is no new-medicines development program. Brazilian pharmaceutical companies have been short-sighted and have not developed new drugs. Although the diversity of the Brazilian flora is a remarkable opportunity for the development of new medicine products, natural product research is limited to a small group. These difficulties are common to all underdeveloped countries. Strategies for the pharmacological study of medicinal plants are proposed, the main difficulties are identified and a discussion of possible ways to overcome them is presented.