Experimental study on a quasi-optical mode converter for transforming the whispering-gallery mode into a circularly polarized hollow radiation beam

An experiment was carried out for transforming the 120 GHz-TE_12.2 whispering-gallery mode (WGM) into a circularly polarized hollow radiation beam. A hollow beam was formed by reflecting the WGM, which was radiated from a 16 mm radius circular waveguide cut, with an annular mirror having suitable local normal vectors. The experimentally observed field intensity profiles of the reflected wave were in good agreement with calculated results.     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

The implementation of time-domain diakoptics in the FDTD method

The time-domain diakoptics is implemented in the finite-difference time-domain (FDTD) method with two types of connecting interfaces: i) directional interface (TLM-type), and ii) total-field interface (FDTD-type). The FDTD-type interface provides a more efficient way to realize time-domain diakoptics than TLM, especially for device optimization problems. To emulate the TLM-type interface in FDTD, two novel algorithms are developed in this paper. One is to implement an ultra-wideband absorbing boundary on the excitation plane during excitation. The other is to separate directional waves without the knowledge of incident waves. For a large circuit with cascaded modules, sequential and parallel algorithms are provided to connect them. With these connecting algorithms, time-domain diakoptics is one candidate method to realize modular and parallel computation in FDTD simulations. The validity of these algorithms is confirmed by comparison with simulated results from Microwave SPICE     

Reliability of Au bump––Cu direct interconnections fabricated by means of surface activated bonding method

As a room temperature bonding method, surface activated bonding (SAB) method has been introduced to be one of the most appropriate interconnection methods for the next generation of electronic packaging. Thus it is important to study the reliability of SAB interconnection in long term life test.In this paper, interconnections of Au bump and Cu film bonded by SAB method were performed in high temperature thermal aging test. Degradation of properties such as electrical resistance, shear strength of bump and interface microstructure during aging process were studied to investigate the failure mechanism of the interconnection. Intermetallic compound Cu₃Au was found formed at the interface during thermal aging, and it causes evolvement of the properties and failure mode of the interconnection changing in shear test. Results reveal that SAB is suitable for the interconnection between Au bump and Cu film and it is reliable in thermal reliability test.     

Pure delay effects on speech quality in telecommunications

The effect of transmission delay on speech quality in telecommunications is described, with human factors such as conversational mode and the talker's knowledge of the cause of delay taken into account. Objective quality estimation methods for delay effects are proposed, and these methods are applied in an actual communications network. In connection with delay perception in a telephone conversation, the assumption was verified that a talker expects a particular response time from a partner, and that delay that is outside this expectation time window is noticed. Taking this information into account, a subjective conversational experiment is controlled by six kinds of tasks by varying the temporal characteristics. Thus, a subjective assessment of delay effects is obtained by laboratory tests in relation to the detectability threshold, opinion rating, and conversational efficiency. Objective quality measures for each test were defined as a linear combination of temporal parameters that correspond closely to subjective qualities     

Integrated-optic dispersion slope equalizer for N/spl times/ several tens of Gb/s WDM transmission

We report a dispersion slope equalizer on a planar lightwave circuit for wavelength division multiplexing (WDM) transmission. This device consists of an array of lattice-formed equalizers with different compensation values fabricated on one wafer and arrayed-waveguide gratings for wavelength multi/demultiplexing. We describe its configuration, operational principle, parameter design, fabrication, and measured characteristics in detail. N/spl times/20 and N/spl times/40 Gb/s slope equalizers were fabricated and their characteristics agreed well with designed values. We also report a reduction in the bias electrical power needed for thermooptic phase shifters in the equalizer array that we realized by employing a phase trimming technique normally used for optical switches.     

Coherence-Based 3-D and Spectral Imaging and Laser-Scanning Microscopy

The basics of three-dimensional (3-D) and spectral imaging techniques that are based on the detection of coherence functions and other related techniques are reviewed. The principle of the 3-D source retrieval is based on understanding the propagation law of optical random field through the free space. The 3-D and spectral information are retrieved from the cross-spectral density function of optical random field or numerical calculation of the inverse propagation of the cross-spectral density. We will first introduce the coherence-based spectral tomography techniques with low-coherence light sources. These techniques limit their scheme of coherence detection only along the optical axis and some of them achieve simultaneously the high resolution and high speed of detection taking advantage of an imaging lens. We then provided explanations of the principle of 3-D source retrieval that is based on the propagation law of optical random field through the free space along with the introduction of the numerical holography and computed tomography techniques. We will lastly show 3-D spectral imaging schemes with the concurrent laser-scanning cross-sectioning techniques: one is the confocal laser scanning microscopy and the other is the two-photon laser-scanning fluorescence microscopy.     

Quasi-optical waveguide-mode converters using a pair of phase correction mirrors

This paper describes a quasi-optical method for the conversion of modes transmitted through highly oversized circular waveguides. A waveguide-mode is radiated once from a waveguide cut in the form of a radiation beam, which is then properly shaped by two curved mirrors and directed back into the waveguide. The curved mirror shapes are iteratively and automatically determined for given propagation distances using the design technique for phase correction mirrors. The proposed method gives favorable results in designing a waveguide expander/reducer, a TE₀₁-TE₀₂ mode converter, and a TE₀₁-HE₁₁ mode converter.