On the Plasma-Chemical Synthesis of Nanopowders

This paper presents an overview of nanopowders preparation using low-temperature plasma (LTP). LTP with its unique processing capabilities provides an attractive and chemically unspecific route for powder synthesis. Nanopowders such as oxides, nitrides, carbides, catalysts and other nanopowders have been successfully synthesized in LTP reactors based on high intensity arcs, plasma jets and radio-frequency (r. f.) inductively coupled discharges.     

Terahertz emission from CdHgTe/HgTe quantum wells with an inverted band structure

The terahertz electroluminescence from Cd_0.7Hg_0.3Te/HgTe quantum wells with an inverted band structure in lateral electric fields is experimentally detected and studied. The emission-spectrum maximum for wells 6.5 and 7 nm wide is near 6 meV which corresponds to interband optical transitions. The emission is explained by state depletion in the valence band and conduction band filling due to Zener tunneling, which is confirmed by power-law current–voltage characteristics.     

Vitamins as Active Agents for Highly Emissive and Stable Nanostructured Halide Perovskite Inks and 3D Composites Fabricated by Additive Manufacturing

The use of non-toxic and low-cost vitamins like α-tocopherol (α-TCP, vitamin E) to improve the photophysical properties and stability of perovskite nanocrystals (PNCs), through post-synthetic ligand surface passivation, is demonstrated for the first time. Especially interesting is its effect on CsPbI₃ the most unstable inorganic PNC. Adding α-TCP produces that the photoluminescence quantum yield (PLQY) of freshly prepared and aged PNCs achieves values of ≈98% and 100%, respectively. After storing 2 months under ambient air and 60% relative humidity, PLQY is maintained at 85% and 67%, respectively. α-TCP restores the PL features of aged CsPbI₃ PNCs, and mediates the radiative recombination channels by reducing surface defects. In addition, the combination of α-TCP and PNCs facilitates the chemical formulation to prepare PNCs-acrylic polymer composites processable by additive manufacturing. This enables the development of complex shaped parts with improved luminescent features and long-term stability for 4 months, which is not possible for non-modified PNCs. A PLQY ≈92% is reached in the 3D printed polymer/PNC composite, the highest value obtained for a red-emitting composite solid until now as far as it is known. The passivation shell provided by α-TCP makes that PNCs inks do not suffer any degradation process avoiding the contact with the environment and preserve their properties after reacting with polar monomers during composite polymerization.     

Salt in food processing; usage and reduction: a review

Salt is one of the most widely used additives in food industries because of its low cost and varied properties. It has a preservative and antimicrobial effect as a direct consequence of the capacity of sodium chloride to reduce water activity values. In addition, sodium chloride is a flavour enhancer as a consequence of its effect on different biochemical mechanisms. It also has flavour enhancing effects from reducing or enhancing the enzymatic activity of some enzymes responsible for the development of different organoleptic parameters. Trends in sodium chloride use in food industries point to salt replacement or reduction by means of the use of sodium chloride substitutes such as KCl or phosphates; flavour enhancers and the optimisation of the physical form of salt. This trend has arisen as a result of the greater awareness of the negative effects of excess dietary intake of sodium, which has been linked to hypertension and consequently an increased risk of cardiovascular disease. The average total daily sodium intake per individual in developed countries is 4–5 g of Na, which is up to 25 times greater than the minimum adult requirement.     

Activity against Listeria monocytogenes of human milk during lactation. A preliminary study

Human milk samples from three healthy donors were investigated in order to evaluate the antibacterial activity during lactation against Escherichia coli ATCC 25922 and Listeria monocytogenes. The concentration of the main human-milk antimicrobial proteins (lactoferrin (LF), lysozyme (LZ) and secretory immunoglobulin A (sIgA)) was determined by ELISA. Results showed that human milk exhibited antibacterial activity against List. monocytogenes, although it was weakly active against Esch. coli ATCC 25922. The observed antilisterial activity was positively correlated with LZ concentration. In addition, the effect of gastrointestinal proteases, at different pH conditions, that prevail in the stomach of infants (pH 2.0-6.5), on antilisterial activity and protein degradation was evaluated. Hydrolysis with pepsin at pH 4.0-6.5, followed by treatment with pancreatic enzymes, resulted in a decreased hydrolysis of LZ, LF and sIgA and an enhanced antibacterial activity against List. monocytogenes. It is suggested that partial degradation of certain milk proteins at the gastrointestinal level may produce peptides that could act synergistically with the remnant intact proteins.     

The method of moments used in polymerization reaction engineering for 70 years: An overview,tutorial, and minilibrary

In the last seven decades, the method of moments (MoM) has become an invaluable tool in the field of polymerization reaction engineering, due to the simplicity of translating a complex set of population balance equations (PBE) into a system with a limited number of equations. In this work, we offer an overview of the MoM, describing the derivation of the moment equations in a basic kinetic mechanism. Some tools and strategies for the derivation of the moment equations are reviewed and explained in detail, such as the binomial theorem, the method of series expansion and pattern identification (SEPI), extensively used by the community, and a graphical approach of summation inversion. The treatment for multivariate distributions is also exposed, taking advantage of the complete and partial moment techniques. The derivation of the MoM contribution by kinetic mechanisms beyond the basic ones or involving special difficulties, such as depropagation, long chain branching (LCB), random chain scission, LCB and β-scission, short chain branching (SCB) and scission, internal double bond (IDB) (polymerization), termination by combination, reversible deactivation radical polymerization (RDRP), and intermolecular transesterification reactions (ITRs), are explained in a tutorial way. Additionally, the fundamentals of the MoM in copolymerization and the application of the pseudo-homopolymerization approach are briefly described. An introduction of the MoM to emulsion polymerization is also presented. Finally, some advanced applications of MoM in recent works are exposed: MoM models with chain-length dependent or diffusion-controlled termination, and the extension of the MoM for the prediction of the molecular weight distribution (MWD ) .     

Crude oil aggregation by microscopy and dynamic light scattering

This research is focused on establishing a methodology to evaluate the aggregation state of Mexican crude oil solutions from two different sources and SARA compositions, by using Dynamic Light Scattering (DLS). Different crude oil concentrations were established and monitored through time in order to determine their effects on the aggregation state. DLS results indicate that the aggregation state of the studied solutions is influenced by crude oil composition, specifically by the amount of resins. Particle size and elemental analysis of the aggregates were performed by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX), respectively. Results from these techniques reveal particulated low-porosity smooth surfaces due to the presence of resin, as well as the determination of the characteristic elements found in asphaltenes. High-Resolution Transmission Electron Microscopy (HTEM) indicated the presence of asphaltene aggregates constituted by nanometric particles and asphaltene stacking as well as ultrafine nanocrystalline-oriented structures.