Influence of grain boundary weak links on the nonequilibrium response of YBaCuO thin films to short laser pulses

The transient voltage response in both epitaxial and granular YBaCuO thin films to 80 ps pulses of YAGNd laser radiation of wavelength 0.63 and 1.54 m was studied. In the normal and resistive states both types of films demonstrate two components: a nonequilibrium picosecond component and a bolometric nanosecond one. The normalized amplitudes are almost the same for all films. In the superconducting state we observed a kinetic inductive response and two-component shape after integration. The normalized amplitude of the response in granular films is up to five orders of magnitude larger than in epitaxial films. We interpret the nonequilibrium response in terms of a suppression of the order parameter by the excess of quasiparticles followed by the change of resistance in the normal and resistive states or kinetic inductance in the superconducting state. The sharp rise of inductive response in granular films is explained both by a diminishing of the cross section for current percolation through the disordered network of Josephson weak links and by a decrease of condensate density in neighboring regions.     

L-Ascorbic acid in nonenzymatic reactions

The influence of the water content, molar ratio, time and temperature on the formation of nondialysable melanoidins produced by the interaction ofl-ascorbic acid and glycine has been studied. The isolated polymers have been characterized by spectrum analysis and fractionated using gel chromatography. The rate constants of the reaction for temperatures of 90°C, 100°C and 110°C have been calculated and are (0.84±0.29) x 10^?5 x s^?1, (1.33±0.14) x 10^?5 x s^?1 and (5.30±0.37) x 10^?5 x s^?1 respectively. The activation energy of the reaction has been determined to be 106.07±32.47 kJ/mol.     

The Edge Effects Boosting Hydrogen Evolution Performance of Platinum/Transition Bimetallic Phosphide Hybrid Electrocatalysts

Platinum (Pt) is regarded as a promising electrocatalyst for hydrogen evolution reaction (HER). However, its application in an alkaline medium is limited by the activation energy of water dissociation, diffusion of H⁺, and desorption of H*. Moreover, the formation of effective structures with a low Pt usage amount is still a challenge. Herein, guided by the simulation discovery that the edge effect can boost local electric field (LEF) of the electrocatalysts for faster proton diffusion, platinum nanocrystals on the edge of transition metal phosphide nanosheets are fabricated. The unique heterostructure with ultralow Pt amount delivered an outstanding HER performance in an alkaline medium with a small overpotential of 44.5 mV and excellent stability for 80 h at the current density of −10 mA cm⁻². The mass activity of as-prepared electrocatalyst is 2.77 A mg⁻¹_Pt, which is 15 times higher than that of commercial Pt/C electrocatalysts (0.18 A mg⁻¹_Pt). The density function theory calculation revealed the efficient water dissociation, fast adsorption, and desorption of protons with hybrid structure. The study provides an innovative strategy to design unique nanostructures for boosting HER performances via achieving both synergistic effects from hybrid components and enhanced LEF from the structural edge effect.     

Multi-Stage Phase-Segregation of Mixed Halide Perovskites under Illumination: A Quantitative Comparison of Experimental Observations and Thermodynamic Models

Photo- and charge-carrier-induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase-segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge carriers trigger the process, but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena, the full compositional range of methylammonium lead bromide/iodide samples are investigated, MAPb(Br_xI_1-x)₃ with x = 0…1, by simultaneous in situ X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy during illumination. The quantitative comparison of composition-dependent in situ XRD and PL shows that at excitation densities of 1 sun, only the initial stage of photo-segregation is rationalized with the previously established thermodynamic models. However, a progression of the phase segregation is observed that is rationalized by considering long-lived accumulative photo-induced material alterations. It is suggested that (additional) photo-induced defects, possibly halide vacancies and interstitials, need to be considered to fully rationalize light-induced phase segregation and anticipate the findings to provide crucial insight for the development of more sophisticated models.     

Application of virtual reality for peritoneal dialysis exchange learning in patients with end-stage renal disease and cognitive impairment

Virtual Reality - Cognitive impairment is not uncommon in patients with end-stage renal disease and can make it more difficult for these patients to carry out peritoneal dialysis (PD) on their own....     

A systematic literature review on IoT-aware business process modeling views,requirements and notations

Software and Systems Modeling - The Internet of things has been adopted in several sectors both influencing how people work and enhancing organizations’ business processes. This resulted in...     

Air damping of high performance resonating micro-mirrors with angular vertical comb-drive actuators

Microsystem Technologies - The maximum scan angle amplitude of resonating micro-mirrors, intended for micro-projection display applications is limited by air damping. Three-dimensional transient...     

Flexural behavior of stratified reinforced concrete: construction,testing, analysis,and design

Stratified concrete poses a promising alternative for construction. Its fresh and hardened properties have been studied at the material level; however, structural behavior in steel reinforced specimens has not been studied. This paper focuses on the flexural behavior of eight stratified reinforced concrete (SRC) specimens representing slices from a slab or non-bearing wall. Specimens with two stratified concrete designs and three steel ratios were tested and compared to estimates from a fiber element numerical model and rectangular stress-block design methods from ACI 318 and Eurocode 2. The results suggest that SRC has similar damage modes as ordinary reinforced concrete (ORC). The fiber element model accurately estimated the measured behavior, while ACI 318 and Eurocode 2 differed from the experimental results by <25%. These prediction accuracies are similar to those for ORC. Therefore, the flexural design of SRC can be done using both fiber element and rectangular stress-block approaches.     

Biodegradable Microparticles for Simultaneous Detection of Counterfeit and Deteriorated Edible Products

In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the authenticity and the potential deterioration of the tagged food or pharmaceutical formulations. These microparticles integrate spatially patterned authenticity code with two sensors—the first one detects possible presence of pathogenic microbes through monitoring pH while the second one identifies products stored above optimal temperatures via optical monitoring of the microparticle degradation. Particles are synthesized from a biocompatible polymer and a photoinitiator, dextran modified with 2‐hydroxyethylmethacrylate and riboflavin, respectively, using a continuous, high throughput method stop‐flow lithography. The proposed synthesis approach also enables crosslinking with visible light bringing about additional flexibility to flow lithography. Model liquid and solid food and pharmaceutical products are successfully labeled with microparticles and the functionality of the sensors in aqueous solutions is demonstrated.