Carbon‐Nanotube–PDMS Composite Coatings on Optical Fibers for All‐Optical Ultrasound Imaging

Polymer–carbon nanotube composite coatings have properties that are desirable for a wide range of applications. However, fabrication of these coatings onto submillimeter structures with the efficient use of nanotubes has been challenging. Polydimethylsiloxane (PDMS)–carbon nanotube composite coatings are of particular interest for optical ultrasound transmission, which shows promise for biomedical imaging and therapeutic applications. In this study, methods for fabricating composite coatings comprising PDMS and multiwalled carbon nanotubes (MWCNTs) with submicrometer thickness are developed and used to coat the distal ends of optical fibers. These methods include creating a MWCNT organogel using two solvents, dip coating of this organogel, and subsequent overcoating with PDMS. These coated fibers are used as all‐optical ultrasound transmitters that achieve high ultrasound pressures (up to 21.5 MPa peak‐to‐peak) and broad frequency bandwidths (up to 39.8 MHz). Their clinical potential is demonstrated with all‐optical pulse‐echo ultrasound imaging of an aorta. The fabrication methods in this paper allow for the creation of thin, uniform carbon nanotube composites on miniature or temperature‐sensitive surfaces, to enable a wide range of advanced sensing capabilities.     

Molecular Origin of the Charge Carrier Mobility in Small Molecule Organic Semiconductors

Small‐molecule organic semiconductors are used in a wide spectrum of applications, ranging from organic light emitting diodes to organic photovoltaics. However, the low carrier mobility severely limits their potential, e.g., for large area devices. A number of factors determine mobility, such as molecular packing, electronic structure, dipole moment, and polarizability. Presently, quantitative ab initio models to assess the influence of these molecule‐dependent properties are lacking. Here, a multiscale model is presented, which provides an accurate prediction of experimental data over ten orders of magnitude in mobility, and allows for the decomposition of the carrier mobility into molecule‐specific quantities. Molecule‐specific quantitative measures are provided how two single molecule properties, the dependence of the orbital energy on conformation, and the dipole‐induced polarization determine mobility for hole‐transport materials. The availability of first‐principles based models to compute key performance characteristics of organic semiconductors may enable in silico screening of numerous chemical compounds for the development of highly efficient optoelectronic devices.     

Trapping and recombination processes via deep level T3 in semi-insulating gallium arsenide

Trapping and recombination of free carriers by deep level T₃ has been studied. Occupancy of the level by electrons and dynamics of its filling and emptying as a function of illumination with monoenergetic photons in 0.69–1.55 eV range has been monitored by the thermally stimulated currents method. We have found that level T₃ behaves more like a recombination center than like an ordinary electron trap. Besides trapping free electrons from conduction band, this trap can also communicate with valence band, trapping holes. The capture cross section for trapping a hole is estimated to be comparable or even larger than the capture cross section for trapping an electron. However, in many experimental conditions free electrons are generated more abundantly than free holes, and free carrier mobility and thermal velocity are both much higher for electrons than for holes. Therefore, electron trapping often prevails, so that this frequently detected defect, has been up to now most often perceived as a deep electron trap.     

Estimation and setting starting values in ARMA algorithms

For the given observations set of the ARMA (autoregressive moving average) process, the likelihood function depends, not only on model parameters, but on the starting values of the input and output. Therefore, it is called theconditional likelihood function. Theunconditional likelihood function can be obtained in two ways. The first is to set the starting values to zero, as is often done, and the second is to set them to the properly estimated values. The difference between these two types of likelihood functions is significant when the given data sequence is short, and any of the zeros of the moving average part is close to the boundary of the unit circle.In this paper the direct method of starting value estimation and its application to two off-line ARMA estimation algorithms, the maximum likelihood (ML) algorithm and the iterative inverse filtering (ITIF) algorithm, is proposed. Experimental results prove both increased efficiency and stability of these algorithms.The importance of setting the starting values properly is also significant when the recursive algorithm, with previously estimated parameters, has to be restarted. The advantage of the proposed reinitialization method is shown on the recursive lattice algorithm working in the block mode.     

Voltammetric and galvanostatic studies of hydrous and anhydrous iridium oxide films

Electrolytically grown hydrous oxide films on iridium wire electrodes have been thermally treated from 473 to 773 K. Anhydrous oxide films formed by this treatment have been subjected to cathodic polarization at the potential of the hydrogen evolution reaction, square-wave pulsing of potential from –0.25 to +1.25 V with respoect to SCE and to anodic galvanostatic polarization in 0.5 mol dm^–3 H₂SO₄. Cathodic pretreatment caused an increase of the voltammetric charge in the oxide formation region while the square-wave pulsing formed a hydrous oxide film whose voltammetric charge was superimposed on the charge of the anhydrous oxide film. Both procedures restored the hydrophilic nature of the electrode/solution interface. Potential-time curves during anodic galvanostatic polarization served as a diagnostic criterion for the stability and the state of the oxide film.     

Digraph Matrix Analysis

This paper describes a systematic procedure for constructing a Boolean reliability model from plant schematics, and a technique for determining all sets of single and double component failures which will cause system failure. This technique, called digraph matrix analysis, uses a fault graph instead of the more traditional fault tree. Digraph matrix analysis was recently applied to the system interaction analysis of a very large safety system (over ten thousand components) and is being used to determine security system vulnerabilities.     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Candida albicans homologue of GGP1/GAS1 gene is functional in Saccharomyces cerevisiae and contains the determinants for glycosylphosphatidylinositol attachment

The GGP1/GAS1/CWH52 gene of Saccharomyces cerevisiae encodes a major exocellular 115 kDa glycoprotein (gp115) anchored to the plasma membrane through a glycosylphosphatidylinositol (GPI). The function of gp115 is still unknown but the analysis of null mutants suggests a possible role in the control of morphogenesis. PHR1 gene isolated from Candida alibicans is homologous to the GGP1 gene. In this report we have analysed the ability of PHR1 to complement a ggp1Δ mutation in S. cerevisiae. The expression of PHR1 controlled by its natural promoter or by the GGP1 promoter has been studied. In both cases we have observed a complete complementation of the mutant phenotype. Moreover, immunological analysis has revealed that PHR1 in budding yeast gives rise to a 75–80 kDa protein anchored to the membrane through a GPI, indicating that the signal for GPI attachment present in the C. albicans gene product is functional in S. cerevisiae.     

Functional and chemical characterization of the aging process of an igniter

The igniter consisting of 34% Mg, 60% KNO₃, 3% KClO₄ and 3% organic binder was subjected to accelerated aging under the conditions of 85% relative humidity at 65°C, 75°C and 85°C, and at 75°C with 92% relative humidity. Chemical aging was followed through formation of Mg(OH)₂ and KNO₂. Functional characterization was accomplished in a device constructed to enable simultaneous determination of the heat of combustion and pressure-time recording of the combustion process of both fresh and aged samples. The maximum acceptable deterioration occured at different times depending upon the conditions. The acceleration factor for every 10°C at 85% relative humidity is on average 2.8, leading to a prediction of shelf life of not more than 4 years at 25°C. At the time when burning characteristics were significantly changed, the mixture suffered only slight chemical changes, with only about 1% Mg(OH)₂ and 0.5% KNO₂ being formed. Thus, no chemical changes should be tolerated in such formulations.