The frequency-dependent electrical characteristics of interfaces in the Sn/p-Si metal semiconductor structures

The purpose of this paper is to investigate frequency-dependent electrical characteristics of the interface states in Sn/p-Si metal semiconductor (MS) Schottky structures. To yield quantitative information about their frequency (f) and voltage (V) dependent characteristics, Sn/p-Si MS structures have been studied by using capacitance (C) and conductance (G/ω) measurements over a wide range of frequencies (50 kHz-1 MHz). The increase in capacitance at lower frequencies is seen as a signature of interface states, and the densities of which are evaluated to be of the order of ≅10¹⁰ cm⁻² eV⁻¹. The presence of the interfaces states (N_SS) is also evidenced as a peak in the capacitance-frequency characteristics that increases in magnitude with decreasing frequencies. Furthermore, the voltage and frequency dependence of series resistance (R_S) were calculated from the C-V and G/ω-V measurements and plotted as functions of voltage and frequency. The effect of R_S on C and G/ω is found noticeable at high frequencies. The C-V-f and G/ω-V-f characteristics of studied structures show fairly large frequency dispersion especially at low frequencies due to N_SS in equilibrium with the semiconductor. The experimental values of interface state densities and series resistance from C-V-f and G/ω-V-f measurements were obtained in the ranges of 3.46 × 10¹⁰−1.26 × 10⁹ cm⁻² eV⁻¹ and 71.1-57.3 Ω, respectively. Experimental results show that both the R_S and N_SS values should be taken into account in determining frequency-dependent electrical characteristics.     

Registration and real-time visualization of transcranial magnetic stimulation with 3-D MR images

This paper describes a method for registering and visualizing in real-time the results of transcranial magnetic stimulations (TMS) in physical space on the corresponding anatomical locations in MR images of the brain. The method proceeds in three main steps. First, the patient scalp is digitized in physical space with a magnetic-field digitizer, following a specific digitization pattern. Second, a registration process minimizes the mean square distance between those points and a segmented scalp surface extracted from the magnetic resonance image. Following this registration, the physician can follow the change in coil position in real-time through the visualization interface and adjust the coil position to the desired anatomical location. Third, amplitude of motor evoked potentials can be projected onto the segmented brain in order to create functional brain maps. The registration has subpixel accuracy in a study with simulated data, while we obtain a point to surface root-mean-square error of 1.17+/-0.38 mm in a 24 subject study.     

薄膜晶体硅太阳能电池的潜力

如果效率和成本目标能够实现，薄膜晶体硅太阳能电池有潜力替代目前在光伏市场上占主导地位的多晶硅太阳能电池。     

A multimodal hand-based verification system with an aliveness-detection module

This paper presents a multimodal biometrie verification system based on the following hand features: palmprint, four digitprints and four fingerprints. The features are obtained using the Karhunen-Loève transform based approach, and information fusion at the matching-score level was applied. We experimented with different resolutions of the regions of interest, different numbers of features and several normalization and fusion techniques at the matching-score level. To increase the reliability of the system to spoof attacks we included an aliveness-detection module based on thermal images of the hand dor sa. The verification performance when using a system configuration with optimum parameters, i.e., resolution, number of features, normalization and fusion technique, showed an equal error rate (EER) of 0.0020%, which makes the system appropriate for the implementation of high-security biometric systems.     

A Generalized System for Photo-Responsive Membrane Rupture in Polymersomes

Polymersomes are vesicles whose membranes are comprised of self-assembled block co-polymers. We recently showed that co-encapsulating conjugated multi-porphyrin dyes in a polymersome membrane with ferritin protein in the aqueous lumen confers photo-lability to the polymersome. In the present study, we illustrate that the photo-lability can be extended to vesicles containing dextran, an inert and inexpensive polysaccharide, as the luminal solute. Here we explore how structural features of the polymersome/porphyrin/dextran composite affect its photo-response. Increasing dextran molecular weight, decreasing block copolymer molecular weight, and altering fluorophore-membrane interactions results in increasing the photo-responsiveness of the polymersomes. Amphiphilic interactions of the luminal encapsulant with the membrane coupled with localized heat production in the hydrophobic bilayer likely cause differential thermal expansion in the membrane and the subsequent membrane rupture. This study suggests a general approach to impart photo-responsiveness to any biomimetic vesicle system without chemical modification, as well as a simple, bio-inert method for constructing photo-sensitive carriers for controlled release of encapsulants.     

基于ViBe的改进运动目标检测方法

提出一种基于ViBe算法的改进运动目标检测方法。改进的方法利用二十帧图像进行背景模型的初始化,通过比较SILTP特征值来对前后景像素进行分类,模型更新机制采用替代异常值的方式。在不同场景下的实验结果表明,改进后的算法对光照变化、鬼影产生和噪声具有强鲁棒性。     

Multipath optimized link state routing for mobile ad hoc networks

Multipath routing protocols for Mobile Ad hoc NETwork (MANET) address the problem of scalability, security (confidentiality and integrity), lifetime of networks, instability of wireless transmissions, and their adaptation to applications.Our protocol, called MultiPath OLSR (MP-OLSR), is a multipath routing protocol based on OLSR [1]. The Multipath Dijkstra Algorithm is proposed to obtain multiple paths. The algorithm gains great flexibility and extensibility by employing different link metrics and cost functions. In addition, route recovery and loop detection are implemented in MP-OLSR in order to improve quality of service regarding OLSR. The backward compatibility with OLSR based on IP source routing is also studied. Simulation based on Qualnet simulator is performed in different scenarios. A testbed is also set up to validate the protocol in real world. The results reveal that MP-OLSR is suitable for mobile, large and dense networks with large traffic, and could satisfy critical multimedia applications with high on time constraints.     

Improved nanocrystal formation,quantum confinement and carrier transport properties of doped Si quantum dot superlattices for third generation photovoltaics

An all‐Si tandem solar cell has the potential to achieve high conversion efficiency at low cost. However, the selection and synthesis of candidate material remain challenging. In this work, we show that the conventional ‘Si quantum dots (Si QDs) in SiO₂ matrix’ approach can lead to the formation of over‐sized Si nanocrystals especially when doped with phosphorous, making the size‐dependent quantum confinement less effective. Also, our investigation has shown that the high resistivity of this material has become the performance bottleneck of the solar cell. To resolve these matters, we propose a new design based on Si QDs embedded in a SiO₂/Si₃N₄ hybrid matrix. By replacing the SiO₂ tunnel barriers by the Si₃N₄ layers, the new material manages to constrain the growth of doped Si QDs effectively and enhances the apparent band gap, as shown in X‐ray diffraction, Raman, photoluminescence and optical spectroscopic measurements. Besides, electrical characterisation on Si QD/c‐Si heterointerface test structures indicates the new material possesses improved vertical carrier transport properties. Copyright © 2011 John Wiley & Sons, Ltd.     

A Model‐Based Analysis of Secure Video Transmission Based on IPSec and IPv4

A promising solution to protect wired Internet networks is to use the Secure Internet Protocol (IPSec); however, this has some drawbacks, particularly on the quality of service (QoS). This paper aims at evaluating the video traffic QoS in terms of end‐to‐end delay and packet loss rate. Based on some basic assumptions, our analysis shows that the performance with IPSec is rapidly inferior to the IPv4 performance. We thus suggest adding some QoS parameters into IPSec in order to achieve a compromise between QoS and security.     

The Edge Effects Boosting Hydrogen Evolution Performance of Platinum/Transition Bimetallic Phosphide Hybrid Electrocatalysts

Platinum (Pt) is regarded as a promising electrocatalyst for hydrogen evolution reaction (HER). However, its application in an alkaline medium is limited by the activation energy of water dissociation, diffusion of H⁺, and desorption of H*. Moreover, the formation of effective structures with a low Pt usage amount is still a challenge. Herein, guided by the simulation discovery that the edge effect can boost local electric field (LEF) of the electrocatalysts for faster proton diffusion, platinum nanocrystals on the edge of transition metal phosphide nanosheets are fabricated. The unique heterostructure with ultralow Pt amount delivered an outstanding HER performance in an alkaline medium with a small overpotential of 44.5 mV and excellent stability for 80 h at the current density of −10 mA cm⁻². The mass activity of as-prepared electrocatalyst is 2.77 A mg⁻¹_Pt, which is 15 times higher than that of commercial Pt/C electrocatalysts (0.18 A mg⁻¹_Pt). The density function theory calculation revealed the efficient water dissociation, fast adsorption, and desorption of protons with hybrid structure. The study provides an innovative strategy to design unique nanostructures for boosting HER performances via achieving both synergistic effects from hybrid components and enhanced LEF from the structural edge effect.