Microstructure of NiCoAlFeCuCr multi-component systems synthesized by mechanical alloying

The present study uses the mechanical alloying method to produce series of binary to senary alloys based on Ni, Co, Al, Fe, Cu, Cr. Milling times are 0, 10, 20 and 30 h and experiments are performed in a high energy ball mill. The results of this investigation show that an FCC solid solution is formed in all the studied systems, but a different phase formation response is presented in each system. A mixture of FCC and BCC solid solutions in quaternary to senary systems, is formed for short milling times. Apparently, the dissolution rate of Fe and Cr into the FCC solid solution, is low. Moreover, it is observed that additions of these elements promote the formation of BCC solid solution, which is stable at temperatures up to ?1273 K. Finally, it is observed that the heat treated products present a mixture of FCC and BCC solid solutions with lattice parameters close to those found in the milled products.     

Regulation of memory accuracy with multiple answers: The plurality option.

We report two experiments that investigated the regulation of memory accuracy with a new regulatory mechanism: the plurality option. This mechanism is closely related to the grain-size option but involves control over the number of alternatives contained in an answer rather than the quantitative boundaries of a single answer. Participants were presented with a slideshow depicting a robbery (Experiment 1) or a murder (Experiment 2), and their memory was tested with five-alternative multiple-choice questions. For each question, participants were asked to generate two answers: a single answer consisting of one alternative and a plural answer consisting of the single answer and two other alternatives. Each answer was rated for confidence (Experiment 1) or for the likelihood of being correct (Experiment 2), and one of the answers was selected for reporting. Results showed that participants used the plurality option to regulate accuracy, selecting single answers when their accuracy and confidence were high, but opting for plural answers when they were low. Although accuracy was higher for selected plural than for selected single answers, the opposite pattern was evident for confidence or likelihood ratings. This dissociation between confidence and accuracy for selected answers was the result of marked overconfidence in single answers coupled with underconfidence in plural answers. We hypothesize that these results can be attributed to overly dichotomous metacognitive beliefs about personal knowledge states that cause subjective confidence to be extreme. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Study of the adhesion of Staphylococcus aureus to coated glass substrates

The adhesion of Staphylococcus aureus was studied using a selection of laboratory-prepared and commercially available coated glass substrates using a simple methodology. Substrates were examined by scanning electron microscopy, atomic force microscopy and water droplet contact angles. It was found that microbial adhesion was independent of surface roughness, when this was of a lower magnitude than microbial size. It was also found that microbial adhesion was greater for hydrophilic surfaces than for hydrophobic ones, but that on a photoinduced superhydrophilic surface, microbes were more spread out—a potential benefit for more effective photocatalytic disinfection. It is suggested that hydrophobic and photoinduced superhydrophilic surface coatings both have potential as a means of reducing microbial fouling of surfaces.     

Stability boundary analysis of the dynamic voltage restorer in weak systems with dynamic loads

In this contribution, a stability analysis for a dynamic voltage restorer (DVR) connected to a weak ac system containing a dynamic load is presented using continuation techniques and bifurcation theory. The system dynamics are explored through the continuation of periodic solutions of the associated dynamic equations. The switching process in the DVR converter is taken into account to trace the stability regions through a suitable mathematical representation of the DVR converter. The stability regions in the Thevenin equivalent plane are computed. In addition, the stability regions in the control gains space, as well as the contour lines for different Floquet multipliers, are computed. Besides, the DVR converter model employed in this contribution avoids the necessity of developing very complicated iterative map approaches as in the conventional bifurcation analysis of converters. The continuation method and the DVR model can take into account dynamics and nonlinear loads and any network topology since the analysis is carried out directly from the state space equations. The bifurcation approach is shown to be both computationally efficient and robust, since it eliminates the need for numerically critical and long‐lasting transient simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

A queuing model for distributed scheduling in IEEE 802.16 wireless mesh networks

The IEEE 802.16 standard for wireless broadband networks includes the mesh mode in its specifications, where network nodes interact to deliver packets from a client to a remote destination through intermediate nodes. This paper presents a study of the capacity of IEEE 802.16 wireless networks in mesh mode by using M/G/1/L queuing model that represents each network node by incorporating the features of the standard in order to calculate the average delay and throughput in the node. An iterative method integrates the calculation results at each node, obtaining the end‐to‐end delay from any node of the mesh to the Base Station. Because of multiple hops, a node far from the Base Station may have its flows damaged. To minimize this problem, we propose a criterion for a fair distribution of resources. We show the numerical results of the model which indicate a good fit when compared with simulation results. Copyright © 2013 John Wiley & Sons, Ltd.     

Modeling microwave power structures based on k-furcated waveguides arbitrarily filled with materials by modal techniques.

Waveguide structures are very popular in the microwave power industry due to their power handling capabilities. Modal expansion of the waveguide fields and application of the circuit theory allow for the division of a complex device into several simpler sections which can be analyzed separately with the best suited method. The modal techniques can be divided into two groups--those which analyze junctions or discontinuities and those which examine propagation characteristics. In this paper, a review of modal techniques for high power applications is given. Modal expansion of the fields in the waveguides is then performed and applied to modeling of k-furcated waveguides. The modal analysis based on the Coupled Mode Method is described for the waveguides partially filled with isotropic materials. A hybrid modal analysis coupled with Finite Element Method suitable for more complex waveguide structures is also described. Computational results obtained for some real-life microwave devices are presented. Excellent agreement was found when comparing the results with those generated with a commercial FDTD simulator demonstrates the validity and reliability of the proposed method.     

Recurrent pattern matching based stereo image coding using linear predictors

The Multidimensional Multiscale Parser (MMP) is a pattern-matching-based generic image encoding solution which has been investigated earlier for the compression of stereo images with successful results. While first MMP-based proposals for stereo image coding employed dictionary-based techniques for disparity compensation, posterior developments have demonstrated the advantage of using predictive methods. In this paper, we focus on recent investigations on the use of predictive methods in the MMP algorithm and propose a new prediction framework for efficient stereo image coding. This framework comprises an advanced intra directional prediction model and a new linear predictive scheme for efficient disparity compensation. The linear prediction model is the main novelty of this work, combining adaptive linear models estimated by least-squares algorithm with fixed linear models provided by the block-matching algorithm. The performance of the proposed intra prediction and disparity compensation methods when applied in an MMP encoder has been evaluated experimentally. Comparisons with the current stereo image coding standards showed that the proposed MMP algorithm significantly outperforms the Stereo High Profile of H.264/AVC standard. In addition, it presents a competitive performance relative to the MV-HEVC standard. These results also suggest that current stereo image coding standards may benefit from the proposed linear prediction scheme for disparity compensation, as an extension to the omnipresent block-matching solution.