Drying of Chestnuts (Castanea sativa Mill.) after Osmotic Dehydration with Sucrose and Glucose Solutions

Chestnuts were dehydrated by using a combined method of osmotic dehydration followed by air drying. Samples were osmotically pretreated with sucrose (60% w/w) and glucose (56% w/w) for 8 h, air-dried at temperatures of 45, 55, and 65°C, at a relative humidity of 30% and at a velocity of 2.7 m·s^-1 and the experimental data of the drying kinetics were obtained. Whole samples were dried with different peelings: (a) removal of endocarp and pericarp (peeled) and (b) additionally the internal rough surface (cut). In all cases, cut chestnuts show greater drying rates than peeled samples, indicating that a significant mass transfer resistance in the layer nearest to the surface takes place. Peeled samples pretreated with sucrose solutions behave in a similar way to untreated samples. For the rest of the samples, the cut samples osmotically treated with sucrose solutions and all the samples treated with the glucose solution, the drying rates decrease during drying. Drying kinetics are successfully modeled by employing a diffusional model that takes the shrinkage into account. The effective coefficient of water diffusion was evaluated and correlated with temperature. The quality of the final product was monitored by color change. In spite of the fact that the total color difference is not modified by the osmotic treatment, the L*, a*, and b* color coordinates of cut samples treated with sucrose and glucose solutions do undergo changes; the L* and a* coordinates change less than the b*.     

Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying

Subalpine fir (Abies lasiocarpa Hook) lumber containing wetpockets (wetwood) was used for the measurements of gas permeability and the results were then compared to the gas permeability of normal wood, which was free of the wetpockets. The impacts of pretreatment methods were also investigated, including steaming at green condition, steaming at fiber saturation point (FSP), microwave treatment, and radio-frequency treatment. Results from this study demonstrated that both the transverse and the longitudinal gas permeability of subalpine fir wetwood are greater than that of normal wood. There is no significant change in the permeability after 4-h steaming pretreatment at green condition and at FSP. The impacts of microwave and radio-frequency pretreatments were not significant, but the findings cannot be generalized because they may depend on the power intensity applied.     

The surgical treatment of acute myocardial infarct in the 90s]

At present, the treatment for acute myocardial infarction is revascularization during the critical initial period of six hours after the beginning of coronary occlusion. Despite the fact that surgery performed within this time period presents a hospital of mortality around 2%, and with excellent results in the long term, it is seldom used due to logistic limitations and capabilities of hospital infrastructures, high costs and the possibility of the surgical team initiating surgery inside the useful time period. Surgery is thus limited to the patients with suitable anatomy, who are not candidates or had failure of thrombolytic/angioplasty therapy and are in the six-hour period after initiation of symptoms. Surgery performed at a later stage has good results if performed in a non emergency situation, specially after the first 72 hours. Surgery continues to be the only treatment for the mechanical complications of infarction, and good results have recently been shown in ventricular septal ruptures, with hospital mortality of 14%, due to the use of an endoventricular patch in patients operated early, before the consequences of low cardiac output develop at systemic level. In the surgical treatment of mitral regurgitation, the tendency has been to use repair techniques whenever possible, but still with hospital mortality up to 15%. The recent advances of the techniques and tactics of myocardial preservation during surgery have made a very significant contribution to the better results we see today.     

Inter-observer agreement in analysis of basal body temperature graphs from infertile women

In this study, we evaluated the reproducibility of analysis of basal body temperature graphs under optimized conditions for agreement. A total of 160 recordings were selected from spontaneous cycles of infertile women and analysed by three experienced clinicians using uniform criteria. Agreement at the various stages of analysis was assessed by the 'proportions of agreement' with 95% confidence intervals. Agreement in identification of the thermal nadir was clearly superior to that reported in previous publications. Reproducibility of 'ovulatory' graph features (i.e. biphasic graphs and adequate thermal shifts) was excellent. Agreement in classification of monophasic graphs and inadequate thermal shifts, although lower, was still good. Thus, with experienced observers and uniform criteria, a good agreement can be achieved in analysis of the most important parameters of the basal body temperature graph. We believe that an effort should be made to generalize the use of uniform analysis criteria, because only then can results from different institutions be compared and the remaining clinical evaluation of the method be performed.     

Groundwater-surface water interactions and agricultural nutrient transport in a Great Lakes clay plain system

Nutrient export from agricultural land to surface waters is a significant environmental concern within the Great Lakes Basin (GLB). A field-based watershed-scale study was completed to investigate spatial and temporal variations of phosphorus and nitrate to assess nutrient transport pathways and groundwater-surface water interactions in an agriculturally dominated clay plain system. This was conducted in the 127 km² Upper Parkhill Watershed, near Lake Huron in southwestern Ontario, Canada. Data collection occurred from June 2018 to May 2019 via continuous sensor deployment and discrete sampling of stream water, groundwater, hyporheic zone, and tile drainage water. Samples were analyzed for various nutrient species (total, total dissolved, soluble reactive, and particulate phosphorus, and nitrate-N) to examine the hydrological dynamics of principal transport pathways of agriculturally-derived nutrients. Total phosphorus and nitrate concentrations in stream water ranged from 0.007 to 0.324 mg/L and 0.32 to 13.13 mg NO₃^?-N/L, respectively. Tile drainage water total phosphorous concentrations varied from 0.006 to 0.066 mg/L. Groundwater total dissolved phosphorus concentrations ranged from <0.003 to 0.085 mg/L. Transport of phosphorus through tile drainage was observed to be greater than through groundwater over the study period. No distinct relationship was observed between nutrient concentrations in the hyporheic zone and the vertical hydraulic gradient within this zone in the studied stream reach. Preliminary correlations were discerned between water quality observations and recognized land management practices. Given the elevated stream nutrient concentrations, these results are consequential for the continual improvement of strategies and programs devised to conserve water resources within the GLB.     

Gain‐scheduled dynamic output feedback control for discrete‐time LPV systems

This paper presents synthesis conditions for the design of gain‐scheduled dynamic output feedback controllers for discrete‐time linear parameter‐varying systems. The state‐space matrix representation of the plant and of the controller can have a homogeneous polynomial dependency of arbitrary degree on the scheduling parameter. As an immediate extension, conditions for the synthesis of a multiobjective ??_∞ and ??₂ gain‐scheduled dynamic feedback controller are also provided. The scheduling parameters vary inside a polytope and are assumed to be a priori unknown, but measured in real‐time. If bounds on the rate of parameter variation are known, they can be taken into account, providing less conservative results. The geometric properties of the uncertainty domain are exploited to derive finite sets of linear matrix inequalities based on the existence of a homogeneous polynomially parameter‐dependent Lyapunov function. An application of the control design to a realistic engineering problem illustrates the benefits of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Agile distributed software development: enacting control through media and context

While face‐to‐face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality requirements and people vs. process‐based collaboration. To investigate these challenges, we conducted an in‐depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch's elements of control framework, we offer an analysis of how control was enacted through the project context and in the participants' mediated communication. The analysis reveals that formal measurement and evaluation control were persistently enacted through mediated communication. These formal control practices were, however, predominantly carried out in conjunction with informal roles and relationships such as clan‐like control inherent in agile development. Overall, the study demonstrates that, if appropriately applied, communication technologies can significantly support distributed, agile practices by allowing concurrent enactment of both formal and informal controls. The paper discusses these findings as they relate to previous research and concludes with their implications for future research.     

Very true operators in effect algebras

We introduce the concept of very true operator on an effect algebra. Although an effect algebra is only partial, we define it in the way which is in accordance with traditional definitions in residuated lattices or basic algebras. This is possible if we require monotonicity as an additional condition. We prove that very true operators on effect algebras can be characterized by means of certain subsets which are conditionally complete.     

Energy-Efficient Thermal-Aware Autonomic Management of Virtualized HPC Cloud Infrastructure

Virtualized datacenters and clouds are being increasingly considered for traditional High-Performance Computing (HPC) workloads that have typically targeted Grids and conventional HPC platforms. However, maximizing energy efficiency and utilization of datacenter resources, and minimizing undesired thermal behavior while ensuring application performance and other Quality of Service (QoS) guarantees for HPC applications requires careful consideration of important and extremely challenging tradeoffs. Virtual Machine (VM) migration is one of the most common techniques used to alleviate thermal anomalies (i.e., hotspots) in cloud datacenter servers as it reduces load and, hence, the server utilization. In this article, the benefits of using other techniques such as voltage scaling and pinning (traditionally used for reducing energy consumption) for thermal management over VM migrations are studied in detail. As no single technique is the most efficient to meet temperature/performance optimization goals in all situations, an autonomic approach that performs energy-efficient thermal management while ensuring the QoS delivered to the users is proposed. To address the problem of VM allocation that arises during VM migrations, an innovative application-centric energy-aware strategy for Virtual Machine (VM) allocation is proposed. The proposed strategy ensures high resource utilization and energy efficiency through VM consolidation while satisfying application QoS by exploiting knowledge obtained through application profiling along multiple dimensions (CPU, memory, and network bandwidth utilization). To support our arguments, we present the results obtained from an experimental evaluation on real hardware using HPC workloads under different scenarios.     

Analysis of weakly guiding cladded acoustic fibers of hexagonal crystal symmetry

An approximate analysis of the weakly guiding cladded acoustic fiber consisting of a core and infinite thick cladding both with hexagonal crystal symmetry is presented. The crystalline Z axis is parallel to the fiber axis. Weak guidance conditions require that the stiffness constants of the core are slightly less than those of the cladding, and the density of the core and cladding are almost the same. Approximate dispersion and cutoff equations are derived for all pure guided modes. Dispersion curves of several lower-order guided torsional, radial-axial and flexural modes are evaluated using both exact and approximate formulas and they are in good agreement. A simple approximate dispersion equation for leaky (longitudinal-type) modes is also obtained.