Validation of a liquid chromatography-tandem mass spectrometry method for the simultaneous determination of sulfonamides,trimethoprim and dapsone in muscle,egg, milk and honey

A quantitative multi-residue method that includes 13 sulfonamides, trimethoprim and dapsone was developed and validated according to Commission Decision 2002/657/EC for muscle, milk egg and honey samples. For all matrices, the same extraction procedure was used. Samples were extracted with an acetone/dichloromethane mixture and cleaned up on aromatic sulfonic acid (SO₃H) SPE cartridges. After elution and concentration steps, analytes were identified and quantified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Data were acquired according to the multiple reaction-monitoring approach (MRM) and analytes were quantified both by the isotope dilution and the matrix-matched approaches calculating the response factors for the scanned product ions. The developed method shows good linearity, specificity, precision (repeatability and within-laboratory reproducibility), and trueness. Estimated CCβ for sulfonamides ranged between 5.6 and 8.2 µg kg^?1 for eggs, between 11.1 and 69.9 µg kg^?1 for milk, between 64.7 and 87.9 µg kg^?1 for muscle, and between 2.7 and 5.3 µg kg^?1 for honey. CCβ values for dapsone were 3.1, 0.6, 0.7 and 1.5 µg kg^?1 and for trimethoprim were 3.1, 6.7, 81.7 and 3.0 µg kg^?1 calculated for eggs, milk, muscle and honey, respectively. Recovery for all matrices was in the range from 89.1% and 109.7%. In matrix effect testing, no significant deviations were found between different samples of muscle and milk; however, a matrix effect was observed when testing different types of honey. The validation results demonstrate that the method is suitable for routine veterinary drug analysis and confirmation of suspect samples.     

Nicotine lozenges for the treatment of smokeless tobacco use.

Nicotine lozenges have been shown to increase tobacco abstinence rates in cigarette smokers, but they have not been evaluated in smokeless tobacco (ST) users. We conducted an open-label, one-arm, phase II clinical trial to evaluate the efficacy of the 4-mg nicotine lozenge for the treatment of withdrawal and craving associated with tobacco abstinence among ST users. Eligible subjects received 4-mg nicotine lozenges for 6 weeks followed by a 6-week taper. Subjects completed daily tobacco withdrawal diaries, and data on lozenge use, adverse events, and lozenge acceptability were collected. Urine anabasine was collected at 3 and 6 months for biochemical confirmation of self-reported tobacco abstinence. Participants were 30 ST users with a mean age of 35.4 years (SD=6.5) using an average of 4.2 cans or pouches (SD=3.2) of ST per week for a mean of 15.1 years (SD=6.5). Among subjects continuously tobacco abstinent for the first 2 weeks, no significant increases in composite withdrawal symptoms were observed, compared with baseline symptoms, whereas craving decreased significantly. Biochemically confirmed 7-day point-prevalence tobacco abstinence was 53% (95% CI=34%-72%) at 12 weeks (end of treatment) and 47% (95% CI=28%-66%) at 6 months. Few adverse events attributable to the nicotine lozenge occurred, and the lozenge was perceived as helpful in assisting subjects quit ST. The use of the 4-mg nicotine lozenge appears promising for the clinical treatment of withdrawal symptoms and craving associated with tobacco abstinence in ST users. Future phase III clinical trials investigating the efficacy of nicotine lozenges are warranted.     

Stability of bisphenol A diglycidyl ether and bisphenol F diglycidyl ether in water-based food simulants

Varnishes used for the inner coatings of food cans are often based on epoxy resins or vinylic organosols. The epoxy resins can be produced from bisphenol A (BPA) and bisphenol F (BPF), and these also contain bisphenol A diglycidyl ether (BADGE) or bisphenol F diglycidyl ether (BFDGE) as stabilising components. These compounds may break down during storage and also by the influence of food simulants. The stability of BADGE and BFDGE were studied using reverse-phase gradient high-performance liquid chromatography (RP-HPLC) with ultraviolet detection (UV). Three experimental conditions for spiked simulants were compared: (1) the storage at 25 °C (C1), (2) the storage at 40 °C (C2) and (3) the storage at 25 °C after 15 min heating at 120 °C (C3). Distilled water, 3% acetic acid and 10% ethanol were used as food simulants. It was observed that BADGE is more stabile than BFDGE. The loss of BADGE and BFDGE were minimal in 10% ethanol (39 and 46% at 25 °C, 60 and 69% at 40 °C, respectively) and highest in 3% acetic acid (60 and 63% at 25 °C, 76 and 82% at 40 °C, respectively). At experiment (C3), the hardest conditions, significant degradation was not shown in comparison with conditions (C1) and (C2), contrariwise BADGE and BFDGE in 10% ethanol were minimal degradated at conditions (C3) from all these experiments (loss of 5 and 8%, respectively).     

Antioxidant and Antimicrobial Activities of Echinacea (Echinacea purpurea L.) Extracts Obtained by Classical and Ultrasound Extraction

Antioxidant and antimicrobial activities of Echinacea purpurea L. (Asteraceae) extracts obtained by classical and ultrasound solvent extraction were compared. The dry aerial part of plant was extracted by 70% ethanol at a solid-to-liquid ratio of 1:10 (m/v) and 25°C. The extract obtained by classical solvent extraction contained 29% larger amounts of phenolic compounds and 20% higher content of flavonoids. 2,2-diphenyl-1-picril hydrazyl radical (DPPH) scavenging reached 93.6% and the values of EC50 were (34.16±0.65) μg·ml⁻¹ and (65.48±1.12) μg·ml⁻¹ for the extracts obtained by the classical and ultrasound extractions, respectively. The extracts, independent of the extraction technique applied, showed a considerable growth inhibition on Candida albicans and Saccharomyces cerevisiae, while no growth inhibition zones were observed for Aspergillus niger. The diameters of inhibition zone observed for all the microorganisms were larger for extracts obtained by classical extraction than those by ultrasound extraction.     

Specific aspartate residues in FET3 control high-affinity iron transport in Saccharomyces cerevisiae

Site-directed mutagenesis was performed on a set of six aspartate residues of Fet3, the multicopper ferroxidase involved in high-affinity iron transport in Saccharomyces cerevisiae, in order to comprehend the molecular determinants of the protein function. Asp312, Asp315, Asp319 and Asp320 were predicted by homology modelling to be located in a negatively charged surface-exposed loop of the protein. Other two aspartate residues (Asp278 and Asp279) are placed close to the type 1 copper- and iron-binding sites, possibly linking these sites to the negatively charged region. In vivo results showed that mutation of Asp319 and Asp320 to yield D319N and D320N derivatives strongly impairs the ability of the yeast to grow under iron-limiting conditions. In particular, substitution of Asp320 with asparagine essentially abolished the Fet3-dependent iron transport activity. All other mutants (D278Q, D279N, D312N and D315I) behaved essentially as the wild-type protein. The electron paramagnetic resonance spectrum of the soluble forms of D319N and D320N showed significant changes of the copper sites' geometry in D319N but not in D320N. At variance with the membrane-bound forms, soluble D319N and D320N derivatives were highly susceptible to proteolytic degradation, suggesting that replacement of Asp319 or Asp320 locally modifies the structure of Fet3, making the protein sensitive to proteolysis when it is not protected by the membrane environment. In turn, this might be evidence of a shielding role of the permease Ftr1, which could interact with Fet3 at the level of the aspartate-rich negatively charged region.     

The Expression Pattern of Surface Markers in Canine Adipose-Derived Mesenchymal Stem Cells

The influence of cultivation on the expression pattern of canine adipose-derived mesenchymal stem cells (cAD-MSCs) surface markers, contributing to, among others, the promotion of growth, proliferation, differentiation and immunomodulatory mechanisms of an excellent therapeutic, is still unknown. To fill the gap, we investigated CD90, CD44, CD73, CD29, CD271, CD105, CD45 and CD14 patterns of expression at the protein level with flow cytometry and mRNA level using a real-time polymerase chain reaction array. Gentle variations of expression occurred during cultivation, along with increased CD90, CD44 and CD29 expression, low and decreasing CD271 and CD73 expression and a decrease of initially high CD105. As expected, CD45 and CD14 were not expressed by cAD-MSCs. Interestingly, we discovered a significant decrease of CD73 expression, compared to early (P1–P3) to late (P4–P6) passages, although the CD73 gene expression was found to be stable. The percentage of positive cells was found to be higher for all positive markers up to P4. As CD73′s one important feature is a modulation from a pro-inflammatory environment to an anti-inflammatory milieu, the expression of CD73 in our conditions indicate the need to consider the time cells spend in vitro before being transplanted into patients, since it could impact their favourable therapeutical properties.     

Expression Pattern of 5-HT (Serotonin) Receptors during Normal Development of the Human Spinal Cord and Ganglia and in Fetus with Cervical Spina Bifida

The expression of 5-HT (serotonin) receptors (sr) was analyzed in the spinal cord and ganglia of 15 human conceptuses (5–10-weeks), and in the 9-week fetus with spina bifida. We used immunohistochemical method to detect sr-positive, apoptotic (caspase-3) and proliferating (Ki-67) cells, double immunofluorescence for co-localization with protein gene peptide (pgp) 9.5 and GFAP, as well as semiquantification and statistical measurements. Following the neurulation process, moderate (sr1 and sr2) and mild (sr3) expression characterized neuroblasts in the spinal cord and ganglia. During further development, sr1 expression gradually increased in the motoneurons, autonomic and sensory neurons, while sr2 and sr3 increased strongly in floor and roof plates. In the ganglia, sr3 expression increased during limited developmental period, while sr1 and sr2 increased throughout the investigated period. Co-expression of sr/pgp 9.5 characterized developing neurons, while sr/GFAP co-localized in the roof plate. In the spinal cord and ganglia of malformed fetus, weaker sr1 and sr2 and stronger sr3 expression accompanied morphological abnormalities. Anomalous roof plate morphology showed an excess of apoptotic and proliferating cells and increased sr3 expression. Our results indicate a human-species specific sr expression pattern, and the importance of sr1 in neuronal differentiation, and sr2 and sr3 in the control of the roof plate morphogenesis in normal and disturbed development.     

Modeling of an industrial double-roll crusher of a urea granulation circuit

Since for granulation processes the crusher operation has a decisive influence on the system stability, a reliable mathematical model to represent an industrial double-roll crusher of a urea granulation circuit is provided in this work. The crusher was described by the model given by Austin et al. [Austin L.G., Van Orden D.R., Perez J.W. A Preliminary Analysis of Smooth Roll Crushers, International Journal of Mineral Processing, 6 (1980), 321-336.] for mineral processing. The breakage parameters estimation was based on industrial data. The experimental particle size distributions of the feed, intermediate and product streams were obtained from large-scale crushers belonging to a urea granulation plant with a nominal capacity of 1 million tons/year. The results indicate that the model reproduces in a very accurate way the performance of this type of crushers, being a useful tool to: a) optimize the gap setting to meet specific crushed particle size distribution requirements and b) be included as a mathematical module in a plant simulator of the whole urea granulation circuit.     

A comparison of positive matrix factorization and the weighted multivariate curve resolution method. Application to environmental data

In recent years, positive matrix factorization, PMF, has gained popularity in environmental sciences and it has been recommended by the U.S. Environmental Protection Agency as a general modeling tool in air quality control. Among the attractive features contributing to its popularity is that measurement uncertainty information can be incorporated into the PMF model, which allows the handling of missing measurements and data below the reporting limits. In addition, the solutions obtained from PMF obey constraints such as the non-negativity of the source compositions and source contributions of samples that make their interpretation physically meaningful. A less popular multivariate curve resolution method based on a weighted alternating least-squares algorithm, MCR-WALS, also incorporates the measurement error information and non-negativity constraints, which makes this method a potential tool when obtaining composition and contribution profiles of environmental data. Both methods use the same loss function, but they differ in the way the profiles are obtained. The goal of this study was to compare the performance of PMF with the performance of MCR-WALS for data sets simulated with different correlation and error structures. The results showed that the profiles extracted by both methods are virtually the same for data with different error structures.     

Electrochemical Behavior of Sintered CuAg4 at. pct Alloy

The electrochemical characteristics of sintered CuAg4 at. pct alloy in different stages of synthesis and thermomechanical treatment were examined by cyclic voltammetry in a NaOH medium. On the voltammograms recorded at the sintered alloy, six current waves can be noticed at the anodic part, and six corresponding current waves are observed at the cathodic part. A possible electrochemical reaction is attributed to each wave. The effect of the potential reversing limit was used to distinguish the correlation between the anodic and cathodic peaks. After the deformation with 60 pct deformation degree, the alloy becomes more corrosion resistant, whereas the corrosion mechanism remains the same as before mechanical treatment. Subsequent anneal of the deformed alloy at 533 K (260 °C) for 150 minutes leads to the hardening effect. At the same time, the alloy remains corrosion stable, and some of the current waves present at the other voltammograms are hardly noticeable here. Also, we propose our own model of oxide layer formation on the surface of a Cu-Ag alloy.