Fluorescent polyacrylonitrile with 1,8-naphthalimide side chains

The copolymerization of acrylonitrile with two polymerizable fluorescent naphthalimide dyes has been investigated. It was found that the monomeric dyes took part in the polymerization and 94–96% of initially 1 wt.-% (relative to acrylonitrile) were covalently bound in the polymer chain, and thus new fluorescent side-group copolymers were obtained. The absorption and basic photophysical characteristics of monomeric naphthalimid dyes and copolymers in dimethylformamide are reported.     

Spontaneous copolymerization of 2-phenyl-2-oxazoline with cyclic carboxylic anhydrides

Summary The copolymers obtained by the spontaneous reaction between 2-phenyl-2-oxazoline (PhOx) and different anhydrides (succinic-SA, maleic-MA and phthalic-PA) in the absence of an added initiator have been studied. The copolymers were characterized by FTIR and ¹³C-NMR spectroscopies. Compositions were determined by quantitative elemental analysis and average molecular weights were obtained by GPC. The PhOx/MA and PhOx/PA were found to be alternating copolymers, whereas the PhOx/SA copolymer was a statistical one, rich in PhOx.     

A Glass–Ceramic Derived from High TiO2-Containing Slag: Microstructural Development and Mechanical Behavior

A novel glass–ceramic material was developed from the melt of a TiO₂-containing iron-making slag with additional waste glass. The high percentage (∼20 wt% TiO₂) of this network-modifying oxide has promoted a crystallization of the parent glass, resulting in a fine-grained, homogeneous polycrystalline material with high mechanical properties ( E =120 GPa, flexural strength=∼180 MPa, and Vickers hardness=7 GPa) after a heat treatment at 1100°C for 2 h. The room temperature and elevated temperature fracture toughness were also studied. The main crystalline phases of the glass–ceramic material were of the pyroxene series until heat-treatment temperature reached 1000°C, at which titanium-rich perovskite and armalcolite crystals became the dominant phases. The end material is high-strength, aesthetically acceptable (metallic gray or opaque brown colored), and suitable for structural and architectural applications.     

Improved structured light 3D scanner with application to anthropometric parameter estimation

Obtaining accurate anthropometric body segment parameters in a fast and reliable manner is an essential step in biomechanical analysis of human motion. With advance of computer vision, and reduction in cost of electronic components, building a customized computer-vision based measurement device becomes possible. In the paper a novel structured light pattern for 3D structured light scanner is proposed. During development, accuracy and robustness of the proposed system were tested on artificial objects with known surface configurations, after which measurements were performed on human subjects. Simultaneous measurements with standard structured light pattern were achieved and obtained results compared. Volumetric parameters of both artificial object and human body segment obtained by 3D scanning were compared to the immersion method and were found to be in a good agreement and were used for segment mass estimation. Obtained results are presented and analyzed, and conclusions about system performance with possible improvements are discussed.     

Solubility of potassium ferrate in 12 M alkaline solutions between 20°C and 60°C

The solubility of potassium ferrate (K₂FeO₄) was measured in aqueous solutions of NaOH and KOH of total concentration 12 M containing various molar ratios of KOH:NaOH in the range 12:0 to 3:9. Several analytical methods were tested for the determination of ferrate concentration. The final method chosen consisted of potentiometric titration of the ferrate sample with an alkaline solution of As₂O₃. The assumption was made that ferrate dissociates in concentrated KOH solutions predominantly to KFeO₄⁻. The solubility constant, S, defined as the product of the molar concentration of the potassium ion, K⁺, and the ferrate anion, KFeO₄⁻, was found to be 0·044 ± 0·006 mol² dm⁻⁶ for 20°C, 0·093 ± 0·004 mol² dm⁻⁶ for 40°C and 0·15 ± 0·09 mol² dm⁻⁶ for 60°C. From these results the heat of dissolution of K₂FeO₄ was calculated as −14·3 kJ mol⁻¹. At 60°C the enhanced decomposition of the ferrate at the higher temperature led to a greater deviation in solubility values compared with data for either 20°C or 40°C.     

Integrated ambient ozone evaluation by passive samplers and clover biomonitoring mini-stations

An ozone monitoring network was set up using passive samplers and biological mini-stations of two clones of white clover (Trifolium repens L. cv. Regal), NC-R (O(3)-resistant) and NC-S (O(3)-sensitive). This paper reports on a pilot study performed in the period June-October 1999 in the Rome municipal area by using five biomonitoring mini-stations and ozone passive samplers with a new nitrite based design. This combined methodology can be used to obtain information on the biological implications of the injury due to tropospheric ozone. The two techniques can integrate data for the short-medium period and can be placed in different urban and rural sites, proving to be a very useful tool for ozone concentration mapping.     

Biohydrometallurgical/UV production of ferrous sulphate heptahydrate crystals from pyrite present in coal tailings

The objective of this work was to develop a biohydrometallurgical/UV radiation route to produce ferrous sulphate heptahydrate (melanterite) from the pyrite present in coal tailings. The experimental work was carried out with a pyrite concentrate obtained from gravimetric processing of coal tailing. At laboratory scale it was performed the oxidation of pyrite in an aqueous medium in packed bed leaching columns in an oxidising environment with the presence of acidophilic bacteria (Acidithiobacillus ferrooxidans). The recirculation of the liquor allowed obtaining an iron-rich extract. The conversion of Fe³⁺ to Fe²⁺ was performed using ultraviolet irradiation (UV). Finally, the solution was evaporated allowing the formation of iron sulphate crystals. The results demonstrated that it is possible to produce high purity ferrous sulphate heptahydrate crystals using coal tailings as raw material.     

Low strain rate plasticity of continuously cast carbon steels

By a special plastometric method, the straightening operation of a vertically cast strand of two carbon steels was simulated. The temperature dependence of the low strain rate plasticity of both the steels examined is analogous although caused by very different reasons. As to the plain carbon steel, the amount of ferrite and its location is of prime importance, whereas in the case of eutectoid steel various modes of fracture and the influence of temperature on the relative plasticity of type II MnS inclusions are influencial. To avoid transverse cracking, it seems to be suitable to keep the strand at a rather high temperature (above 900 °C). Temperature cycling seems to be fundamental as to the structural changes taking place in the strand (grain size refining, ferrite fraction if any), whereas analogous influences of straining are more or less inexpressive. Of course, the results obtained are of quality only since the practical and laboratory conditions differ significantly. The knowledge obtained could be applied in regulating the intensity of strand cooling with the aim of lowering the waste portion and improving the surface quality of worked products.