Microscopic study on the polymorphism of Ca3SiO5

The polymorphism of Ca₃SiO₅ has been studied microscopically by following changes in optic properties and modes of twinning of the crystal as a function of temperature. Besides the six modifications already established, a hitherto-unidentified monoclinic phase M₃, which can be characterized only by microscopy at present, has been found to exist just below the rhombohedral phase (R). The transitions $\text{T}{}_2\text{?}\text{T}{}_3\text{et}\text{M}{}_1\text{?}\text{M}{}_2$ that give clear thermal effects on the DTA curve show no corresponding change under the microscope.     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Anisotropic Thermal Expansion of β-Ca2SiO4 Monoclinic Crystal

Crystals of β-Ca₂SiO₄ (space group P 12₁/ n 1) were examined by high-temperature powder X-ray diffractometry to determine the change in unit-cell dimensions with temperature up to 645°C. The temperature dependence of the principal expansion coefficients (α_i) found from the matrix algebra analysis was as follows: α₁= 20.492 × 10⁻⁶+ 16.490 × 10⁻⁹ ( T - 25)°C⁻¹, α₂= 7.494 × 10⁻⁶+ 5.168 × 10⁻⁹( T - 25)°C⁻¹, α₃=−0.842 × 10⁻⁶− 1.497 × 10⁻⁹( T - 25)°C⁻¹. The expansion coefficient α₁, nearly along [302] was approximately 3 times α₂ along the b -axis. Very small contraction (α₃) occurred nearly along [     01]. The volume changes upon martensitic transformations of β↔α_L' were very small, and the strain accommodation would be almost complete. This is consistent with the thermoelasticity.     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Effect of Fe-Zn alloy layer on the corrosion resistance of galvanized steel in chloride containing environments

In this study, the effect of Fe-Zn alloy layer that is formed during galvanizing process on the corrosion behavior of galvanized steel has been investigated. The galvanostatic dissolution of galvanized steel was carried out in 0.5 M NaCl solution to obtain the Fe-Zn alloy layer on the base steel. The alloy layer was characterized to be composed of FeZn₁₃, FeZn₇ and Fe₃Zn₁₀ intermetallic phases, which constitute the zeta, delta1 and gamma layers of galvanized steel, respectively. It was observed that the alloy layer has similar cathodic polarization behavior but different anodic polarization behavior compared to galvanized steel. The anodic current plateau of alloy layer was up to 100 times lower than that of galvanized coating. Corrosion test performed in wet-dry cyclic condition has shown that the alloy layer has lower corrosion rate as compared to galvanized steel. From the results of corrosion test of alloy layer and base steel, it was concluded that Zn²⁺ has positive effect on the protectiveness of the zinc corrosion products. The measurement of surface potential over the alloy/steel galvanic couple has confirmed the galvanic ability of alloy layer to protect both the alloy layer itself and the base iron during initial stage of atmospheric corrosion.     

Activity measurement of gallium in the B2 phase of the CoGa–Sb system by the EMF method with zirconia-based solid electrolyte

Gallium activity in the B2 phase regions of both binary Co–Ga and ternary Co–Ga–Sb systems was measured by EMF method with stabilized zirconia solid electrolyte The temperature range was 1073–1273 K and Sb concentrations were 1, 2 and 3 mol fractions. Ga activity at 1173 and 1273 K increases sharply in Ga rich region and the addition of Sb to the CoGa phase increases Ga activity. Activity change corresponds to the lattice parameter change with Sb addition to the CoGa phase.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

High efficiency mixing by the use of cross-linked micro capillary fluid filter

A novel type passive mixing device that causes the three-dimensional flow was proposed. This mixer consists of the integrated capillary bundle structure. And the capillaries ware cross-linked each other. So it is called cross-linked micro capillary filter. The mixing effect of the cross-linked micro capillary filter was calculated by the computational fluid dynamics (CFD). The fluid behaviour in the fine three-dimensional structure could be analysed by the use of CFD. In the result of CFD calculation, the cross-linked micro capillary filter estimated high mixing effect. Moreover, the mixing efficiency was become higher by change the cross-linked form. The calculation result was decided the form of the cross-linked micro capillary filter. And this filter was fabricated by application of the Deep X-ray lithography. To form the cross-linked capillary, it was operated twice exposures. In these exposures, respectively the exposure stage was tilted to difference angle. The cross-linked capillary filter fabricated in this way was applied to vertical fluid flow operation. This cross-linked capillary filter could hold and transmit the fluid by the switchover of in impressed pressure. Herewith the cross-linked micro capillary filter showed availability as high efficiency mixing device.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.