Organotin compounds in the liver tissue of marine mammals from the Polish coast of the Baltic Sea

Butyltins (BTs) and phenyltins (PhTs) were determined in the livers of marine mammals found by-caught or stranded along the Polish coast of the Baltic Sea. During the investigation an original analytical method was developed. Butyltin compounds were detected in all the liver samples, whereas phenyltins were not detected in any of the samples. The total concentrations of BTs ranged from 43.9 to 7698 ng(Sn) x g(-1) dry weight. Age-related trends to accumulate BTs in immature porpoises were found. At the same time there were no male-female differences in BTs concentrations observed. No statistically significant spatial distribution differences were found between the locations corresponding to the open Baltic Sea waters and inside the Gulf of Gdańsk, which is characterized by high maritime activity. In comparison to butyltin levels in marine mammals from other geographic regions, the samples analyzed indicate a significant degree of tributyltin pollution along the Polish coast of the Baltic Sea. On the basis of a literature review, higher BT levels are usually found in waters close to highly industrialized areas, such as Japan, Hong Kong, and the United States.     

Bulk nanocomposite made of ZnO lamellae embedded in the ZnWO4 matrix: growth from the melt

Journal of Materials Science - Zinc oxide (ZnO) nanostructures exhibiting high exciton binding energy and efficient radiative recombination, even at the room temperature, are of increasing interest...     

Corroles as receptors in liquid membrane electrodes and their potentiometric response towards salicylic acid

Here, we report on the application of corroles as analytically active compounds in liquid membrane electrodes (ISE) that are sensitive towards salicylic acid and salicylate.The potentiometric signals generated by corrole-incorporated ISEs strongly depend on the pH of the aqueous sample solution and the membrane composition, such as the presence of lipophilic sites. Corrole incorporating ISEs are characterised by a low detection limit (4.0 × 10⁻⁵ M) and a wide linear range (4.0 × 10⁻⁵ to 5.3 × 10⁻³ M). Also, they are free from interference versus other organic anions.The mechanism of the generation of the potentiometric signals of corrole incorporating ISEs in the presence of salicylate anion, as well salicylic acid, will be discussed.     

Therapeutic Potential of Jasmonic Acid and Its Derivatives

A modern method of therapeutic use of natural compounds that would protect the body are jasmonates. The main representatives of jasmonate compounds include jasmonic acid and its derivatives, mainly methyl jasmonate. Extracts from plants rich in jasmonic compounds show a broad spectrum of activity, i.e., anti-cancer, anti-inflammatory and cosmetic. Studies of the biological activity of jasmonic acid and its derivatives in mammals are based on their structural similarity to prostaglandins and the compounds can be used as natural therapeutics for inflammation. Jasmonates also constitute a potential group of anti-cancer drugs that can be used alone or in combination with other known chemotherapeutic agents. Moreover, due to their ability to stimulate exfoliation of the epidermis, remove discoloration, regulate the function of the sebaceous glands and reduce the visible signs of aging, they are considered for possible use in cosmetics and dermatology. The paper presents a review of literature data on the biological activity of jasmonates that may be helpful in treatment and prevention.     

Preparation and characterization of magnetic carbon nanomaterials bearing APTS–silica on their surface

The formation of metal-encapsulated carbon nanomaterials by using metallic catalysts (iron, cobalt, and nickel) has been studied. Moreover, these materials were coated with silica surface modified by (3-Aminopropyl)-trimethoxysilane (APTS). Each intermediate structure was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface morphology of silica-coated carbon nanomaterials was analyzed by scanning electron microscopy (SEM). The modified, APTS–silica surface was additionally characterized by Fourier transform infrared spectroscopy (FT-IR), elemental (EA), and thermogravimetric analysis (TGA).     

Shape design of internal cooling passages within a turbine blade

The article concerns the optimization of the shape and location of non-circular passages cooling the blade of a gas turbine. To model the shape, four Bezier curves which form a closed profile of the passage were used. In order to match the shape of the passage to the blade profile, a technique was put forward to copy and scale the profile fragments into the component, and build the outline of the passage on the basis of them. For so-defined cooling passages, optimization calculations were carried out with a view to finding their optimal shape and location in terms of the assumed objectives. The task was solved as a multi-objective problem with the use of the Pareto method, for a cooling system composed of four and five passages. The tool employed for the optimization was the evolutionary algorithm. The article presents the impact of the population on the task convergence, and discusses the impact of different optimization objectives on the Pareto optimal solutions obtained. Due to the problem of different impacts of individual objectives on the position of the solution front which was noticed during the calculations, a two-step optimization procedure was introduced. Also, comparative optimization calculations for the scalar objective function were carried out and set up against the non-dominated solutions obtained in the Pareto approach. The optimization process resulted in a configuration of the cooling system that allows a significant reduction in the temperature of the blade and its thermal stress.     

Effect of polymer structure on the molecular dynamics and thermal behavior of poly(allyl acetoacetate) and copolymers

In this paper, dielectric and calorimetric studies of the small-molecule glass former allyl acetoacetate monomers as well as its newly synthetized homopolymer and copolymers with different styrene composition were performed in both the liquid and glassy states. The molecular dynamics studies by the broadband dielectric spectroscopy and the stochastic temperature modulated differential scanning calorimetry enabled us to explore relaxation processes of examined materials in the wide frequency range. We found that the copolymers reveal two co-existing glass transitions characterized by the glass transition temperatures, which are very close to those of the corresponding homopolymers. These results suggest that the copolymers exhibited some sequences of acetoacetate units with a microphase-separated morphology in agreement with the value of reactivity ratio previously determined. We investigated effects of copolymerization compositions on the glass transition temperature, the isobaric fragility index, the dielectric and calorimetric intensity, and the dynamic heterogeneity on the glass transitions of the materials.     

The layers of history: New architecture interventions in castle ruins

This paper aims to analyse new architectural works that were created within the ruins of castles and fortifications. The contribution addresses the question whether it is possible to indicate common features in these types of objects, by studying what changed and how it changed in the complexes of historic ruins by introducing a new layer: a new form in their space. The analysis covers eight complexes of castle ruins located in Europe, all being important elements of local historical heritage, all preserved in their historical forms as permanent ruins. Such places are characterised by high imageability, which is conducive to maintaining interest, despite political or ideological changes. The need to introduce new functions, which is connected with this interest, raises questions related to preserving the identity and authenticity of the place, while at the same time building relationships with modern architecture. The research concerned examples from Europe, mostly post-competition works. Research and analysis have shown that all the objects are characterised by well thought-out urban solutions and carefully selected locations of new buildings within the existing historic ruins, thereby helping maintain the structural order between the existing and the new spatial forms. Interventions within the castle ruins were carried out using modern architectural language, using modern techniques and solutions, with great attention to detail. They are characterised by the abstraction of new forms and the creative reinterpretation of existing architectural elements and material solutions of the monuments. The consciously applied contrast of forms and materials means that the historical heritage is being rediscovered, enriched with new, currently necessary functions. In all the described works, the introduction of new spatial experiences within existing objects constituted a significant value. The examples analysed show that the experience and analysis of the broadly understood historical, urban and architectural context are conducive to the creation of valuable architectural works. The characteristics of these examples may contribute to a broader debate on the dialogue between historical heritage and contemporary architecture.