Deformation and Fracture of β‐Silicon Nitride Micropillars

Room‐temperature deformation and fracture behaviors under microcompression of single crystal β‐silicon nitride (Si₃N₄) micropillars were investigated. Pillars were fabricated by focused ion beam (FIB) in large Si₃N₄ grains, located close to the basal and prismatic orientations, selected by electron backscatter diffraction (EBSD). The micromechanical test and the damage characterization were performed by nanoindentation and scanning electron microscopy (SEM), respectively. The elastic, plastic, and fracture properties, such as Young's modulus, yield stress, and rupture stress are considerably influenced by the pillar orientation. The activation of the type slip system was identified in case of basal oriented micropillars.     

On the solid state heat transport phenomena measurement

The paper deals with theoretical and experimental aspects of lumped capacitance model (LCM) application for the study of heat transport in different materials. Patented construction of the measuring chamber together with special software the fundamental features of which are presented here allows evaluating thermal conductivity k, specific heat capacity c_p and thermal diffusivity α. Obtained results are in relatively very good agreement with those obtained from independent measurement or table values.     

Influence of nitriding on corrosion resistance of martensitic X17CrNi16‐2 stainless steel

Nitriding increases surface hardness and improves wear resistance of stainless steels. However, nitriding can sometimes reduce their corrosion resistance. In this paper, the influence of nitriding on the corrosion resistance of martensitic stainless steel was investigated. Plasma nitriding at 440 °C and 525 °C and salt bath nitrocarburizing were carried out on X17CrNi16‐2 stainless steel. Microhardness profiles of the obtained nitrided layers were examined. Phase composition analysis and quantitative depth profile analysis of the nitrided layers were preformed by X‐ray diffraction (XRD) and glow‐discharge optical emission spectrometry (GD‐OES), respectively. Corrosion behaviour was evaluated by immersion test in 1% HCl, salt spray test in 5% NaCl and electrochemical corrosion tests in 3.5% NaCl aqueous solution. Results show that salt bath nitrocarburizing, as well as plasma nitriding at low temperature, increased microhardness without significantly reducing corrosion resistance. Plasma nitriding at a higher temperature increased the corrosion tendency of the X17CrNi16‐2 steel.     

PV-GIS: a web-based solar radiation database for the calculation of PV potential in Europe

Solar radiation is a key factor determining electricity produced by photovoltaic (PV) systems. This paper presents a solar radiation database of Europe developed in the geographical information system, and three interactive web applications providing an access to it. The database includes monthly and yearly average values of the global irradiation on horizontal and inclined surfaces, as well as climatic parameters needed for an assessment of the potential PV electricity generation (Linke atmospheric turbidity, the ratio of diffuse to global irradiation, an optimum inclination angle of modules to maximize energy yield). In the first web application, a user may browse radiation maps and query irradiation incident on a PV module for different inclination angles. The second application simulates daily profiles of irradiance for a chosen month and module inclination and orientation. The third web application estimates electricity generation for a chosen PV configuration. It also calculates optimal inclination and orientation of a PV module for a given location. The database and the applications are accessible at http://re.jrc.cec.ev.int/pvgis/pv/imaps/imaps.htm.     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Internalization and Accumulation in Dendritic Cells of a Small pH‐Activatable Glycomimetic Fluorescent Probe as Revealed by Spectral Detection

DC‐SIGN, an antigen‐uptake receptor in dendritic cells (DCs), has a clear role in the immune response but, conversely, can also facilitate infection by providing entry of pathogens into DCs. The key action in both processes is internalization into acidic endosomes and lysosomes. Molecular probes that bind to DC‐SIGN could thus provide a useful tool to study internalization and constitute potential antagonists against pathogens. So far, only large molecules have been used to directly observe DC‐SIGN‐mediated internalization into DCs by fluorescence visualization. We designed and synthesized an appropriate small glycomimetic probe. Two particular properties of the probe were exploited: activation in a low‐pH environment and an aggregation‐induced spectral shift. Our results indicate that small glycomimetic molecules could compete with antigen/pathogen for binding not only outside but also inside the DC, thus preventing the harmful action of pathogens that are able to intrude into DCs, for example, HIV‐1.     

Preparation of dehydroxylated and delaminated talc: Meta-talc

The roentgen-amorphous delaminated and dehydroxylated phase was prepared applying intensive milling procedure and subsequent thermal treatment of talc. Due to the similarity in properties and in thermal behavior of this material with roentgen-amorphous delaminated and dehydroxylated kaolinite phase, i.e. meta-kaolinite, the name meta-talc was suggested for this material. The properties and the behavior during thermal treatment were investigated using thermal analysis, x-ray diffraction analysis, infrared spectroscopy and scanning electron microscopy. The suggested procedure changes the activation energy of dehydroxylation, the behavior during thermal treatment and the phase composition of the product. The kinetics and thermodynamics of the thermal transition were evaluated using Kissinger equation and Eyering law.     

Ionic polymers with tunable liquid‐crystalline properties

Side‐chain polyesters were synthesized from N‐octyl‐, N‐dodecyl‐ or N‐hexadecyl‐diethanolamine and succinic acid anhydride. These polyesters were then transformed into polyester hydrochlorides by protonation of the amino groups using different amounts of HCl (20–100 mol%). Above 60 mol% the reaction is not quantitative and a degree of protonation of up to 88% is obtained. The structures of the synthesized polyesters and their hydrochlorides were determined by ¹H nuclear magnetic resonance spectroscopy. The thermal properties of the synthesized polyesters and their hydrochlorides were also studied using differential scanning calorimetry in relation to the side‐chain length and the degree of polyester protonation. The polyester with octyl side chains and its hydrochlorides were amorphous liquids at room temperature, while the polyester and polyester hydrochlorides with hexadecyl side chains formed a smectic crystalline phase, S_mB, or its tilted analogues. The polyester with a dodecyl side chain was also an amorphous liquid at room temperature, while its hydrochlorides with various degrees of protonation were smectic liquid crystals, as determined by X‐ray diffraction. By simply varying the degree of protonation the liquid crystal isotropization temperature was increased from 32 °C to 82 °C. Copyright © 2011 Society of Chemical Industry     

Damage driven crack initiation and propagation in ductile metals using XFEM

Originally Continuum Damage Mechanics and Fracture Mechanics evolved separately. However, when it comes to ductile fracture, an unified approach is quite beneficial for an accurate modelling of this phenomenon. Ductile materials may undergo moderate to large plastic deformations and internal degradation phenomena which are well described by continuum theories. Nevertheless in the final stages of failure, a discontinuous methodology is essential to represent surface decohesion and macro-crack propagation. In this work, XFEM is combined with the Lemaitre ductile damage model in a way that crack initiation and propagation are governed by the evolution of damage. The model was built under a finite strain assumption and a non-local integral formulation is applied to avoid pathological mesh dependence. The efficiency of the proposed methodology is evaluated through various numerical examples.