Modeling statistical dopant fluctuations in MOS transistors

The impact of statistical dopant fluctuations on the threshold voltage V_T and device performance of silicon MOSFET's is investigated by means of analytical and numerical modeling. A new analytical model describing dopant fluctuations in the active device area enables the derivation of the standard deviation, σV_T , of the threshold voltage distribution for arbitrary channel doping profiles. Using the MINIMOS device simulator to extend the analytical approach, it is found that σV_T, can be properly derived from two-dimensional (2-D) or three-dimensional (3-D) simulations using a relatively coarse simulation grid. Evaluating the threshold voltage shift arising from dopant fluctuations, on the other hand, calls for full 3-D simulations with a numerical grid that is sufficiently refined to represent the discrete nature of the dopant distribution. The average V_T-shift is found to be positive for long, narrow devices, and negative for short, wide devices. The fast 2-D MINIMOS modeling of dopant fluctuations enables an extensive statistical analysis of the intrinsic spreading in a large set of compact model parameters for state-of-the-art CMOS technology. It is predicted that V_T-variations due to dopant fluctuations become unacceptably large in CMOS generations of 0.18 μm and beyond when the present scaling scenarios are pursued. Parameter variations can be drastically reduced by using alternative device designs with ground-plane channel profiles     

Disaster recovery planning in an automated manufacturingenvironment

Disasters may strike at any moment in any location. When they do, no distinction is made about the type of firm that is being affected, whether it is a bank or a manufacturing plant. Most firms do not plan for possible disasters, and those that do have typically focused on computer and data contingency planning. In this paper, the focus is shifted to incorporate disaster recovery planning for manufacturing enterprises, especially those that are automated. Automated manufacturing enterprises have characteristics that put them at an increased risk to disasters. The methodological framework proposed in this paper will aid manufacturing organizations and their managers in reducing the risks associated with unanticipated disasters. The framework is termed the “Manufacturing Operations Recovery and Resumption” model. Recommended activities and tools for effective management of this methodology are identified     

Gyrotron coaxial cylindrical resonators with corrugated innerconductor: Theory and experiment

Gyrotron coaxial resonators with a longitudinally slotted inner cylinder are examined analytically using a surface impedance model, from which expressions for the electromagnetic field, ohmic quality (Q) factor, and characteristic equation of the transverse eigenvalues χ _m,p are obtained. The major attributes of such resonators are expressed by the dependence of χ_m,p on the parameter C-defined as the ratio of the outer to inner radii of the coaxial structure. In that connection, the effect of the corrugation parameters on χ_m,p is particularly investigated on the basis of an expression derived for the slope function dχ_m,p,p/dC. It is shown that the χ_m,p(C) curve may either exhibit oscillatory behavior or present a flat portion over a wide range of C depending on the corrugation parameters chosen. The theory is checked against experiment in which resonant frequencies and total Q factors were measured for TE modes operating in the range of 8-16 GHz in a coaxial cavity with 40 slots. Good agreement is found in that the magnitude of the relative error in frequency is less than 0.5%. Corrugated coaxial resonators prove to be relevant to megawatt gyrotrons where highly selective cavities are required to ensure high conversion efficiency     

Neural network congestion controller in prioritised ATM switch

A neural network (NN) scheme is proposed for congestion control in an ATM switch with time priorities. It is shown that in a prioritised switch it is necessary to monitor the buffer to be controlled as well as buffers with higher priorities. Furthermore, it is shown that the NN scheme in a time prioritised switch gives lower cell loss and delay when compared to the conventional binary scheme     

Nonoperative management of esophageal perforations. Is it justified?

OBJECTIVE: Experiences obtained with nonoperative treatment (NOT), i.e. total prohibition of per oral food intake for a minimum of 7 days, administration of combinations of broad-spectrum antibiotics, and parenteral hyperalimentation, are described in the management of esophageal perforations. SUMMARY BACKGROUND DATA: The place, value, and indication of NOT in the management of esophageal perforation has not yet been unequivocally defined. As a result, contradictory data have been published regarding the outcome of NOT. METHODS: During the past 15 years (1979 to 1994), 20 of 86 patients (23.3%) with esophageal perforation have been treated nonoperatively from the outset. In this group, perforations were located to the upper, middle, and lower third of the esophagus in 50%, 30%, and 20%, respectively. In the operative management group (OT)--in which conservative (drainage, endeprothesis), reconstructive (suture, reinforced suture), and radical (resection) surgical methods were applied--lesions were preponderantly located in the lower one third of the esophagus (56.1%--37/66). As to the interval between the perforation and the onset of treatment, 14 patients had been diagnosed within 24 hours, whereas in 6 cases treatment had been begun beyond 24 hours. RESULTS: NOT could be successfully carried out in 16 patients; the decision to use NOT had to be revised in 4 other cases (Table 1). Two patients were lost; the mortality rate was 10% (2 of 20). The rate of complications was lower in the NOT group (20%, or 4 of 20) than in the OT group (50%, or 33 of 66). CONCLUSIONS: NOT can be suggested for the treatment of intramural perforations. In the case of transmural perforation, this approach should be taken into consideration if the esophageal lesion is circumscribed, is not in neoplastic tissue, is not in the abdominal cavity, and is not accompanied by simultaneous obstructive esophageal disease; in addition, symptoms and signs of septicemia should be absent.     

Estimating the cost of an interview survey using geographic information system software

Estimating the cost of interview surveys is difficult but important. A geographic information system (GIS) was used to determine the shortest time route to survey 533 medical facility locations in Perth. The results provided time and cost estimates for undertaking the survey and the interviewer agreed to a contract for the job on the basis of these estimates.     

Vector-entropy optimization-based neural-network approach to imagereconstruction from projections

In this paper we propose a multiobjective decision making based neural-network model and algorithm for image reconstruction from projections. This model combines the Hopfield's model and multiobjective decision making approach. We develop a weighted sum optimization based neural-network algorithm. The dynamical process of the net is based on minimization of a weighted sum energy function and Euler's iteration, and apply this algorithm to image reconstruction from computer-generated noisy projections and Siemens Somatson DR scanner data, respectively. Reconstructions based on this method is shown to be superior to conventional iterative reconstruction algorithms such as the multiplicate algebraic reconstruction technique (MART) and convolution from the point of view of accuracy of reconstruction. Computer simulation using the multiobjective method shows a significant improvement in image quality and convergence behavior over the conventional algorithms     

Near Shannon limit performance of low density parity check codes

The authors report the empirical performance of Gallager's low density parity check codes on Gaussian channels. They show that performance substantially better than that of standard convolutional and concatenated codes can be achieved; indeed the performance is almost as close to the Shannon limit as that of turbo codes