The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Contamination bacterienne d'une zone balneaire liee a sa frequentation

The bacterial contamination from bathers in the water and sand at a beach was investigated. Measurements were made of the composition of the cutaneous bacterial flora released by two bathers as well as the sensitivity of the main contaminants to solar radiation. The variations in bacterial concentration of the sea water and sand were determined at the sea shore over three complete day cycles. Broadly speaking, the concentration of some bacteria increases with the frequency with which the beach is used. Nevertheless, short-period variations seem to be masked by the opposing effects of solar radiation and bathers.     

Effects of adding organic materials to an acid sulfate soil on the growth of cocoa (Theobroma cacao L.) seedlings

Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.     

Noise impact caused by electrical energy substations in the city of Curitiba, Brazil

This survey is intended to characterize the noise impact due to electrical energy substations in the city of Curitiba over the population living in their vicinity. This impact has been studied with the aid of a computational tool capable of mapping the acoustical field of substations and their vicinity. Several factors have been considered in this survey: (1) sound power of the transformers; (2) vehicle flow on the surrounding roads; (3) positioning of the firewalls, buildings and walls; and (4) terrain topography. Four substations have been analyzed, and an acoustical map has been traced for each of them. With these maps it was possible to visualize what was the incident noise level on the building facades. The predicted noise levels have been compared to the environmental legislation of the noise emissions in effect in the city.     

Activated charcoal and microflora in water treatment

Significant sanitation was achieved by using 0.5% activated charcoal in influent and effluent of a wastewater treatment plant. The drastic reduction in the microorganisms was confirmed for twelve tester strains, including gram-positives, gram-negatives, Candida albicans, Vahlkampfia avara, Leptospira biflexa and Trichomonas foetus. The removal of microflora correlates positively with the quality of the activated charcoal used. Once adsorbed, the bacteria could not be eluted by salt, alkalinization or citric acid. Diatomaceous earth also eliminated some of the microflora, but white clay (Bolus alba) and zinc dust are inefficient. The activated carbon may be reused several times after regeneration by heat (2 h at 160°C), but eventually a slight decrease in adsorbing capacity occurs.     

The collapse of welded aluminium plate girders—an experimental study

Twenty-two tests conducted to study the collapse behaviour of welded aluminium girders are described. The girders are of varying proportions, have transverse or longitudinal web stiffeners and are subjected to different combinations of shear and bending loads. It is observed that, although shear sway mechanisms similar to those for steel girders do develop, the webs of aluminium girders may fracture in the heat affected zones adjacent to the perimeter welds. These fractures develop at some stage during the formation of the collapse mechanism and are the consequence, rather than the cause, of failure. It is shown that the tension field theory, originally developed for steel girders, may overestimate the shear-carrying capacity of aluminium girders and it is concluded that the theory requires some modification before it can be applied with confidence to aluminium girders.     

Precision of in-place concrete strenghts predicted using core strength correction factors obtained by weighted regression analysis

A two-step method for converting a concrete core compression test result to the in-place strength of the corresponding volume of concrete is presented. The strength of a non-standard core is first converted to the equivalent strength of a standard core, and then the standard core strength is converted to the equivalent in-place strength. Strength correction factors required for these conversions, obtained from weighted linear and nonlinear regression analyses presented elsewhere, are summarized. The accuracy of the predicted in-place strength is affected by the inherent error of the core strength measurement itself, and by the uncertainty of the various strength correction factors. It is shown that confidence intervals on the estimates of the strength correction factors obtained by regression analysis underestimate the true model error because the underlying models are imperfect. Instead, the accuracy of the strength correction factors is determined by a weighted regression analysis of ratios of observed-to-predicted values which accounts for the non-uniform variances of the dependent and independent variables. The coefficient of variation of the in-place strength predicted from a test of a 100 or 150 mm diameter core is between 4 and 5.5.%. If the in-place strength is predicted from a test of a 50 mm diameter core, the coefficient of variation of the predicted in-place strength is approximately 12.5%. These error estimates do not account for possible variation of in-place strength throughout the volume of the element being cored.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.