Measurement of the intrinsic process zone in rock using acoustic emission

Laboratory specimens with a smooth boundary (no notch) were fabricated from four different rock types (grain sizes from 0.1–10 mm) and were tested in three-point bending. The locations of acoustic emission that occurred around peak load were used to characterize the dimensions of the region of localized microcracking, the so-called intrinsic process zone. The size of this zone was found to vary significantly between the rock types, but was not found to vary significantly for different size beams of the same material. An approximately linear relation was found between the width of the intrinsic process zone and the logarithm of the grain size. An explanation of size effect evolves naturally by considering the intrinsic process zone as a material characteristic. Two different models were used to analyze stress at failure. The first treated the intrinsic process zone as a mathematical crack, an infinite stress raiser, from which a K_IC value was calculated. The second model assumed the intrinsic process zone was a cohesive notch, a finite stress raiser, from which the theoretical tensile strength was defined. The second method seemed somewhat better at predicting size effect on nominal peak stress.     

Development of passive viscoelastic damper to attenuate excessive floor vibrations

Recent changes in the construction of building floors have included the use of light material composite systems and long span floor systems. Although these changes have many advantages, such floor systems can suffer from excessive vibration due to human activities. This problem is exacerbated in office buildings due to the reduction in inherent damping associated with modern fit outs. Excessive floor vibrations are often realised after the completion of construction or following structural modifications and normally arise due to inadequate knowledge of the damping values in the design process. Thus rectification measures are normally required to reduce floor accelerations. This paper proposes a new innovative passive viscoelastic damper to reduce floor vibrations. This damper can be easily tuned to the fundamental frequency of the floor and can be designed to achieve various damping values. The paper discusses the analytical development of the damper with experimental results presented on a prototype to demonstrate its effectiveness.     

Seismic methods for study of soil building properties

Bulletin of Engineering Geology and the Environment - Information about distribution of elastic wave propagation velocities Vp, Vs in the subsurface zone of a soil mass can be obtained rapidly and...     

Long-term geophysical observations on the inguri dam rock foundation

Bulletin of Engineering Geology and the Environment - It has been found that during construction of the dam, prior to the filling of the reservoir, compaction and loading of the rocks under the...     

The bacterial population of piggery-waste anaerobic digesters

A survey was made of the anaerobic and facultatively anaerobic bacteria present in piggery waste, digesting piggery waste and domestic anaerobic sludge sludge used to start a piggery waste digester. An influence of the input waste was shown in that streptococci, the predominant facultatively anaerobic bacteria in the piggery waste, were the predominant bacteria in the digesting waste, and they replaced Enterobacter, predominant in the domestic sludge, when a piggery waste digestion had been established from this latter material. Cellulolytic or methanogenic bacteria could not be detected in the piggery waste but populations of these, and other hydrolytic bacteria, became established at different times during the buildup of digestion by gradual addition of piggery waste to water. The bacteria concerned in degradation of the waste constituents were all anaerobes.Production of methane from H₂/CO₂, formate and butyrate could be detected in mixed cultures from dilutions of digester contents, but the only methanogenic bacterium that could be isolated in pure culture was Methanobacterium formicicum, which uses H₂/CO₂ or formate only.     

Technique for measuring metallic salt effects upon the indigenous heterotrophic microflora of a natural water

The effects of several concentrations of the metallic salts Ag₂SO₄, NaAsO₃, BaCl₂2H₂O, CdCl₂2.5 H₂O, CrCl₂6H₂O, CuCl₂, HgCl₂, NaCl, NiCl₂6H₂O, PbCl₂ and ZnCl₂ upon the indigenous heterotrophic microflora of a natural water were studied. Effects of these salts upon the heterotrophic activity of the microbes were assayed using the heterotrophic technique whereas lethal effects upon the heterotrophic bacteria were determined using nutrient agar plate counts. The heterotrophic activity method is based upon the uptake and mineralization of a radioactively labeled metabolite (in these experiments ¹⁴C-glucose) by the indigenous aquatic microbes and data analysis is by Michaelis—Menten enzyme kinetics equations. Concentrations of metallic salts which resulted in bacterial death also caused erratic uptake and mineralization rates of ¹⁴C-glucose whereas sub-lethal concentrations, as determined by nutrient agar plate counts, caused a non-competitive inhibition of maximum heterotrophic activity and markedly increased the turnover time of the glucose substrate.     

A quadratic complementarity problem related to the optimal design of a pipeline freely resting on a rough sea bottom

A submarine pipeline resting on a rigid, frictionless seabed assumes an equilibrium configuration which can be determined by solving a unilateral contact problem, i.e. a quadratic program or a variational inequality.When the sea bed is irregular, its profile along the sealine can be modified, in present offshore technology, by means of costly trench excavations or artificial supports, in order to avoid excessive bending moments in the pipe. Thus, the problem arises of determining the minimum cost of the profile changes provided that a specified curvature is nowhere exceeded.This optimal design problem is solved by assuming a quadratic cost function and reducing it to a sequence of convex quadratic programming problems leading to the optimal design situation. Upper and lower bounds on the absolute minimum cost and optimality conditions are established. A suitable algorithm for solving the problem in a finite number of steps is developed. Its generalization to allow for ‘fixed charges’ due to the equipment mobilization cost is presented. Two numerical examples illustrate the optimum (minimum cost) proposed design method.     

Experimental studies on the weatherability of the capivara dam basalts,rio paranapanema,brazil

The weatherability of the basalts in the Capivara Dam site, Rio Paranapanema, São Paulo State, Brazil, has been studied by means of saturation-drying tests. A great number of samples have disaggre — gated intensively with production of fines. The behavior of these rocks is related to their petrography, especially to their content in expansive clay minerals. These studies were performed in order to obtain data for the utilization of this material as rock fill, including ripraps.     

以美国景观设计市场化经营为鉴,审视中国的发展

加利福尼亚作为美国自然环境多样化和文化多元的地区,景观设计在历史上形成了独具特色的风格.在二战以后社会变革和产业复兴中,景观设计学在私营领域得到了巨大发展,涌现了大量的事务所.通过介绍笔者在加州的实践二例,并从多学科合作的设计方法、与不同主体的沟通策略、发展开放空间以及城市复兴的经济和社会考虑等多个方面,阐述了景观设计的意义,并强调私营部门的积极作用,以期对中国的景观设计学发展有所助益.