Evaluation of constructed wetlands by wastewater purification ability and greenhouse gas emissions.

Domestic wastewater is a significant source of nitrogen and phosphorus, which cause lake eutrophication. Among the wastewater treatment technologies, constructed wetlands are a promising low-cost means of treating point and diffuse sources of domestic wastewater in rural areas. However, the sustainable operation of constructed wetland treatment systems depends upon a high rate conversion of organic and nitrogenous loading into their metabolic gaseous end products, such as N2O and CH4. In this study, we examined and compared the performance of three typical types of constructed wetlands: Free Water Surface (FWS), Subsurface Flow (SF) and Vertical Flow (VF) wetlands. Pollutant removal efficiency and N2O and CH4 emissions were assessed as measures of performance. We found that the pollutant removal rates and gas emissions measured in the wetlands exhibited clear seasonal changes, and these changes were closely associated with plant growth. VF wetlands exhibited stable removal of organic pollutants and NH3-N throughout the experiment regardless of season and showed great potential for CH4 adsorption. SF wetlands showed preferable T-N removal performance and a lower risk of greenhouse gas emissions than FWS wetlands. Soil oxidation reduction potential (ORP) analysis revealed that water flow structure and plant growth influenced constructed wetland oxygen transfer, and these variations resulted in seasonal changes of ORP distribution inside wetlands that were accompanied by fluctuations in pollutant removal and greenhouse gas emissions.     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

Mixing power in the preparation of powdered composites

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 5, pp. 6–7, May, 1989.     

Deconvolution of infrared spectra using various milk proteins as an example

The theory of deconvolution of infra-red spectra is presented and illustrated using milk protein spectra. The advantage of this method is impressively demonstrated and its relevance for dairy farming shown using a simple example, the cooling of milk.     

QUANTITATIVE ANALYSIS OF FLAVANOIDS IN BARLEY,HOPS AND BEER BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC)

This work describes a method for the quantitative analysis of flavanoids of barley, hops and beer by HPLC. This method requires only about 4 h and it gives representative and reproducible results. A few results obtained by this method are given for barley and hops.     

Concurrent Cholesky factorization of positive definite banded Hermitian-matrices

First the Cholesky factorization is extended to cover uniformly partitioned banded positive definite matrices of rank n which may be real symmetric or Hermitian. Then two stratagems are given for the use of the algorithm in concurrent machines where the number of processing elements is less than required to factor the matrix in as few serial steps as possible, and where uniformly high efficiency is expected from all processing elements. Expressions are given for the efficiency factor e appearing in the speed-up expression g = eN, and these are specialized for the N node hypercube machine as a function of partition size s, the number N of processing elements of the hypercube machine, and the cost μ of interelement transmission relative to computation. It is shown that efficiency factor e is inversely proportional to μ/s, and that e is almost independent of N when N is large and μ/s = 0. The task is completed in n/s serial steps with no limit on n. The half bandwidth b of the matrix is 2Ns.     

Version control

Software evolves in small steps or versions. Often these versions are results of collaborations among different persons. At times we want to fall back to a previous version or compare different variants. Or, we need to trace changes to change requests. All these tasks relate to version control and show that tool support in this domain is indispensable, as it is with editors and compilers. The author describes available tools and shows why the CVS open source tool is so popular among practitioners.     

Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

Butyltin Species and Inorganic Tin in Water and Sediment of the Detroit and St. Clair Rivers

Water and sediment samples from 29 locations in the Detroit and St. Clair rivers were analyzed for the highly toxic tri-n-butyltin (Bu₃Sn⁺) species and for the less toxic di-n-butyltin (Bu₂Sn²⁺) and n-butyltin (BuSn³⁺) species and inorganic tin. In general, locations sampled in the St. Clair River were less contaminated with butyltin species than those in the Detroit River. Inorganic tin and BuSn³⁺ were detected in over 90% of all subsurface water samples, while Bu₂Sn²⁺ and Bu₃Sn⁺ were detected in 45 and 28% of the same samples, respectively. The highest concentration ofBu₃Sn⁺ in subsurface water, 5.9 × 10^?10 mol Sn/L, was at the mouth of the Ecorse River, a tributary of the Detroit River. The three butyltin species and inorganic tin were also detected in 23–46% of all sediment samples. The highest concentrations of Bu₃Sn⁺ in sediment were found close to the mouths of the River Rouge, another tributary of the Detroit River, and the Ecorse River, and were 6.2 × I0^–7 and 1.7 × I0^–7 mol Sn/kg dry weight, respectively, for the top 2 cm of sediment.