Characterization of an ASIC for CPG sensors with grid-only depth of interaction sensing

A new version of the front-end application specific integrated circuit (ASIC) for co-planar-grid (CPG) sensors is presented. Compared to the first version, the ASIC is optimized for signal/noise performance, modified in peaking time, and it implements timing signals to measure the depth of interaction using the grids signals only. Experimental results using state-of the-art CPG sensors and different approaches for reducing the error due to electron trapping are reported. A new technique that makes use of the sum and difference of the grids signals is also presented.     

Characterization of the activated sludge and of the operating conditions of six SBR treating dairy effluent and operated at industrial scale.

The sludge from six SBRs treating dairy effluent and located at same geographical location, in North East of France, were collected to study their characteristic behavior. The six plants were designed and constructed by the same manufacturer and are working under quite similar operating conditions. The objective of the study was to observe if any similarity existed in the characteristics of the sludge collected from the SBRs. The sludge was characterized for morphological properties (filament index, floc size), settling, compressibility, suspended solids (SS) concentration. The sludge from each plant was different from the others in most of the characteristics. One sludge out of six (sludge G) was completely different from the others with a very degraded structure and low discrete settling and compression. This reactor was not working fully satisfactorily with a too high COD at outlet, probably because this SBR was undergoing repetitive overloading linked to a very bad recovery of the whey by the cheese maker. The five other SBRs were working fully satisfactorily but the characteristics of the five sludges were quite different from one sludge to another. The size of the flocs seemed to be the only parameter measured which could be correlated to the settling characteristics of the sludge. The sludge characteristics and the parameter correlations were also compared with that of municipal activated sludge and were found to be very different.     

Microprocessor testability

As the level of microprocessor complexity increases to several hundred thousand transistors for a single-chip machine, it is becoming very difficult to test commercially available designs to the level of fault coverage desired by some customers. In order to achieve near 100-percent coverage of single stuck-at faults, future microprocessors must be designed with special testing features (designed for testability). The authors describe the testing problem for microprocessors, including the various methods of generating test sets and their application by the user. A survey of the testability features of some of today's commercially available microprocessors is presented. Suggestions for testability features for future-generation microprocessors are also discussed     

Probability of error for selection diversity as a function of dwelltime

An expression is derived for the probability of error of an N th-order selection diversity system for the case where the receiver is forced to swell on one channel for several symbols before being allowed to make a decision regarding the best channel. It is found that the time-varying nature of a fading channel causes significant degradation of the probability of error when the dwell time becomes longer than about 10% of the inverse of the fading bandwidth of the channel. The onset of degradation is a function of the signal-to-noise ratio and of the order of diversity. Specific probabilities of error are calculated for differential phase-shift keyed modulation (DPSK). However, the calculations can be done for any other modulation technique     

Phase Shifter for a 915 MHz Phased Array Hyperthermia System

This paper describes a design for an analog phase shifter operating at 915 MHz and suitable for use in a phased array microwave hyperthermia system. Here, the major operating constraint was minimization of amplitude variation over a 1800 phase shift, whereas previous phase shifters were designed to obtain a linear relationship between phase and control voltage. The result is a simple, inexpensive hybrid coupler phase shifter that operates over a narrow bandwidth and provides 180°of continuous phase shift with input powers up to 1 W.     

Physiological and pathological factors influencing bovine alpha-lactalbumin and beta-lactoglobulin concentrations in milk

Bovine alpha-lactalbumin and beta-lactoglobulin concentrations were determined by radial immunodiffusion in 354 milk samples from uninfected and 98 samples from infected quarters from 42 Holstein-Friesian cows taken at 30, 150, and 270 days of lactation. alpha-Lactalbumin and beta-lactoglobulin concentrations were not affected by quarter location. The alpha-lactalbumin decreased at the end of lactation and in samples collected beyond second lactation. The beta-lactoglobulin concentration increased with stage of lactation. There was a positive correlation between alpha-lactalbumin and beta lactoglobulin (r = .12). Milk from uninfected quarters had mean alpha-lactalbumin and beta-lactoglobulin concentrations of 1.47 and 4.6 mg/ml, respectively. Milk from quarters infected by major pathogens or Corynebacterium bovis had less alpha-lactalbumin. Milk from quarters infected by minor pathogens had less beta-lactoglobulin. There was a negative correlation between alpha-lactalbumin concentration and somatic cell count (r = .31), which was amplified by infection status of quarters. No correlation was noted between somatic cell count and beta-lactoglobulin concentration when considered over the whole sampling period, but the correlation became negative in quarters infected by major pathogens.     

StoryGrid [educational computing]

The StoryGrid project undertook studying the role new interface technologies might play in education, particularly at the high school level. Unfortunately, technology often seizes center stage in high school classrooms; i.e., it becomes the topic of instruction. We believe that learning about technology would be most successful when technology is not the topic, but simply a tool used during instruction. StoryGrid, therefore, was designed to support and to enhance existing narrative activity in classrooms by adhering to the following goals: trigger reflection and interpretation, accommodate individual expression and encourage student discourse.