Behaviour of Hastelloy C22 steel in sulphate solutions at pH 3 and low temperatures

The behaviour of Hastelloy C22 steel (N06022 UNS) in solutions at pH 3 and different temperatures, for radioactive water reprocessing plants was studied. The corrosion potential was found to increase with temperature. In the neighbourhood of the active-passive potentials, Hastelloy steel was corroded by means of a transient form. In addition, the potentials of the active and transpassive peaks shifted towards more negative values with increasing temperature. The transpassive peak increased with temperature and its potential shifted towards smaller values. The temperature increase led to a reduction of the passive region and a higher current in the passivity. As shown by current instabilities during the backward scan and a higher current than those in the forward transpassivity scan, all of the oxide layer could not be destroyed at the breakdown transpassive potentials. From electrochemical impedance spectroscopy (EIS), apparently the thickness of the passive oxide decreased with temperature in the prepassive region. In passivity, the EIS showed an enhancement of corrosion for higher potentials or temperatures. At the passivity-transpassivity limit potentials, an inductive loop may be the result of adsorption. It was found that the diameter of the capacitive semi-circle and the inductive loop decreased when the temperature increased, indicating an enhancement of corrosion and a decrease in adsorption. The number of active sites and oxidation rate were determined at different potentials.     

Using the Percolation Theory to Explain the Release Behavior from Inert Matrix Systems

A novel analysis of drug release process from binary matrix systems has been realized and a study of the initial stage of the process has been carried out. A fast and easy technique has allowed the acquisition of one experimental datum per second. Release data have been analyzed by means of a detailed statistical study. The dissolution profiles were studied applying different kinetic models (zero order, logarithmic, and Higuchi equation). In all the cases studied, a starting process of zero or first order, indicative of a surface-dependent mechanism, has been found. Then, a parameter, named as critical time of kinetic change (t_c), has enabled the authors to establish the instant at which a diffusion release mechanism, according to Higuchi equation, is consolidated. From this time until the end of the process, release mechanism of matrices was shown to be diffusion controlled. The influence of the drug loading and the particle size over the release properties of tablets has also been investigated and it has been evaluated on the basis of percolation theory. The results show a major significance of particle size over the initial drug release and a decrease of its influence along the time. On the other hand, the drug loading variable shows an important influence over the release properties along the whole process.     

Visualization of plasma turbulence

We have developed a three-dimensional toroidal gyrokinetic particle simulation to study tokamak turbulence. The gyrokinetic equations are a reduced set derived from the Vlasov-Maxwell equations by phase averaging over the ion gyromotion and keeping only the time and space scales relevant for describing tokamak plasmas. These large-scale simulations in complex geometry can produce gigabytes of data consisting of large 3D arrays evolving in time. Visualization plays a critical role in going from the raw nonlinear solution of these complex equations to a simplified theoretical model explaining the essential underlying physics     

Synthesis of silicon carbide whiskers using the vapour-liquid-solid mechanism in a silicon-rich droplet

SiC whiskers can be produced from 1350–1500 °C by carbothermal reduction of the silica in a fixed bed percolated by a hydrogen flow. At 1450 °C and above, the addition of iron to the silica-carbon mixture leads to the formation of submicrometre whiskers in the bed, ending with a silicon-rich droplet. The iron has evaporated and condensed at a lower temperature, a few centimetres downstream from the bed, allowing the formation of silicon carbide whiskers ending with an iron droplet according to the vapour-liquid-solid (VLS) mechanism. Submicrometre whiskers are also obtained without iron over a broader range of temperatures. Silicon carbide whisker production in a fixed bed is then possible using a (VLS) mechanism in a silicon-rich droplet and may be controlled without the addition of transition metals, thus improving the purity.Supported by Pechiney Electrometallurgie and the European Communities, Brite project RIIB.A267C.     

Component commonality effects on inventory costs

In this paper we study the effects of increasing component commonality for a single-period model. A two-product, two-level configuration under a general component cost structure is considered. The economic implications of replacing different products' components by common components are analyzed. We develop optimal solutions for the Commonality and Non-Commonality (Basic) Models and provide bounds on the total savings resulting from using commonality. We demonstrate, under general and specific component cost structures, that some forms of commonality may not always be a preferred strategy. Furthermore, we present conditions under which commonality should not be used. Finally, an extension to the two-product multicomponent model is provided.     

A novel four-point bend test for strength measurement of opticalfibers and thin beams. II. Statistical analysis

In the first part of this work, a novel implementation of the well-known four-point bend test is described that determines the strength of thin beams and optical fibers by measuring the loading pin displacement, rather than the applied load. This paper extends the analysis of the nonlinear bending behavior to account for the stochastic nature of strength. A statistical analysis is presented that determines the effective tested length in bending and the tension to bending strength ratio. Results are given for both surface and volume flaws as well as for specimens of both circular and rectangular section. Strength measurements on a deliberately weakened silica optical fiber are consistent with the predictions of the analysis     

Classifier Ensembles with a Random Linear Oracle

We propose a combined fusion-selection approach to classifier ensemble design. Each classifier in the ensemble is replaced by a miniensemble of a pair of subclassifiers with a random linear oracle to choose between the two. It is argued that this approach encourages extra diversity in the ensemble while allowing for high accuracy of the individual ensemble members. Experiments were carried out with 35 data sets from UCI and 11 ensemble models. Each ensemble model was examined with and without the oracle. The results showed that all ensemble methods benefited from the new approach, most markedly so random subspace and bagging. A further experiment with seven real medical data sets demonstrates the validity of these findings outside the UCI data collection