Relations of calculated and actual settlement of a thawing foundation bed

Conclusions 1. The dependence of relative compression of thawing soil on pressure is nonlinear, and it is in agreement with views on the nature of deformation of thawing soil. A dominance of natural pressure in the total load on a foundation bed permits one to use the method of unit summation in calculating settlement of nonlinearly deformable soil. Such calculations, as compared with the linear formulas employed in SNiP, give better agreement with actual settlement.2. In calculating settlement of thawing foundation beds, we need differential consideration of soil compressibility with depth, since the combination of genetic features of frozen ground and the increasing natural pressure with depth may create a different inhomogeneity in the foundation bed.Yakutniproalmaz, Mirnyi. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 1, pp. 18–21, January–February, 1975.     

Procedure for predicting settlements of thawing bases for engineering calculations

It was shown that in order to compute the settlement of thawing cohesive soil under a load in time it is necessary to experimentally determine the consolidation coefficient. A procedure is suggested for determining this coefficient, as well as use of the classical solution of a differential equation for seepage consolidation to describe the settlement of soil, thawing of which can occur according to any law.State All-Union Scientific Research Institute of Roads. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 5–7, July–August, 1993.     

A new approach for simulating aerodynamic vibrations of structures in a wind tunnel—development of an experimental system by means of hybrid vibration technique

The present paper describes a newly proposed technique for simulating aerodynamic vibration of structures, which is referred to as the hybrid vibration technique or HVT. This technique is a combination of step-by-step computer calculation and measurement of the aerodynamic force acting on a model structure in a wind tunnel test. Even though the HVT can be applied effectively, problems still exist with respect to obtaining accurate simulations. These problems include response delay in controlling the model behavior and the inertia force component present in the measured aerodynamic force. Techniques for compensating for response delay and for eliminating inertia force from measured aerodynamic force are applied to a developed system based on HVT simulations of aerodynamic vibration of elastic structures and structures exhibiting elasto-plastic behavior are performed by means of the newly developed system. The effectiveness of the techniques for compensating for the response delay and eliminating the inertia force can be confirmed from the results of the simulations. In addition, the possibility and applicability of HVT is indicated.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Spatial and temporal trends of petroleum hydrocarbons in wild mussels from the Galician coast (NW Spain) affected by the Prestige oil spill

Polycyclic aromatic hydrocarbons (PAHs) were determined in tissues of wild mussels (Mytilus galloprovincialis) from the Galicia coast (NW Spain) in order to assess the extent of the environmental impact caused by the Prestige oil spill (November 13, 2002). Three sampling campaigns were carried out in February, June and November 2003 at 24 stations along the Galicia coast, from La Guardia (Pontevedra) to Ribadeo (Lugo). The spatial distribution of PAHs found in the first sampling period, clearly revealed the central area (Costa da Morte) as the most affected by the oil spill. In these stations, concentrations up to 7780 microg/kg dw of the sum of 13 parent PAHs were found 2-3 months after the spill. Molecular parameters within the aliphatic and aromatic fractions confirmed the presence of the Prestige oil in these samples. The levels markedly decreased at most of the stations in the second sampling and recovered to levels found before the spill in November 2003, 1 year after the accident (29-279 microg/kg dw, av. 133+/-83 microg/kg dw). However, a certain increase was observed in some sites which could be related to the remobilization of oil residues from still unclean intertidal spots or sediments due to the winter marine weather conditions.     

Betons a hautes performances,a granulats artificiels actifs

High strength concretes, in particular at early ages (more than 40 MPa at 3 days and up to 80 MPa at 7 days), are obtained by replacement of certain granular size ranges of sand or gravel by cement-active artificial aggregates in a given concrete composition elaborated with a local supply of aggregates and cement. The strengthening of the paste-aggregate bond by chemical reactions between the artificial aggregates and the cement also involves an improvement of other concrete performances and not only of mechanical strengths. The cracking ability is decreased, the wear strength is higher, and water permeability is low or even nil for certain compositions. The laboratory results are confirmed by tests on the site and show the possibility of achieving high strength concretes without any particular selection of cement and natural aggregates.     

Concurrent denitrification and oxygen uptake in microbial films

Mixed microbial films were grown on the inner walls of a tubular reactor with recirculation of the reactor contents and continuous flow-through of nutrient solution. The loss of total oxidized nitrogen was correlated to the film population, the nitrite concentration and the dissolved oxygen concentration in the reactor. When film population was greater than 0.5 × 10⁹ cells cm⁻², reactor dissolved oxygen concentration greater than 1 mg l⁻¹ had little effect on the nitrate loss. Nitrate loss declined for film populations greater than 2 × 10⁹ cells cm⁻². Models based on Monod and zero-order microbial kinetics were calibrated using these data and a nonlinear least squares method. There was little difference in the residual errors with these methods.     

Tunnelling projects in Southern Africa

Until some thirty years ago tunnelling in southern Africa for civil engineering purposes had been on a relatively small scale and of a sporadic nature. The first major tunnel to be built in the region was the 82 km long Orange-Fish Tunnel. Since 1970 more than 175 tunnels with an aggregate length of just over 400 km have been built. Much of the first phase of the Lesotho Highlands Water Project, which will have more than 100 km of tunnels, is about to be completed. The last thirty years represent the busiest period of tunnelling by civil engineers that southern Africa has ever known. The paper starts by summarising the early history of tunnelling in the region, and goes onto describe recent and current tunnelling projects. It also gives an indication of the possible demand for tunnels in the future.     

A pore crack model for the mechanical behaviour of porous granular rocks in the brittle deformation regime

A model is developed for predicting and simulating the mechanical behaviour and failure mode of brittle porous granular rocks loaded in compression. It is based on a fracture mechanics analysis applied to cracks emanating from the surface of cylindrical pores in two-dimensional, which is well suited to the microstructure of such rocks. It is also consistent with the usual experimental procedure used for biaxial compression tests since the numerical scheme is implemented under the assumption of imposed axial strain. The model takes into account interactions between neighbouring cracks, which grow when their stress intensity factor reaches the fracture toughness of the rock. The simulation of crack growth from cylindrical holes, associated with a failure criterion based on the coalescence of interacting cracks, allows one to calculate the critical stress at rupture and to derive theoretical stress–strain curves.The present model is then used to compare theoretical results with laboratory data obtained on four sandstones with porosity ranging between 13% and 25.5% which were deformed under conventional triaxial compression conditions at confining pressures between 0 and 35 MPa. The comparison shows that by using a small number of parameters (pore size, pore density, fracture toughness, and elastic moduli), the model is able to predict the rock behaviour during the compression tests and the stress level at rupture in a quite accurate way, when the microstructural parameters introduced are consistent with the observations.     

Photodecomposition du bioxyde de chlore et des ions chlorite par irradiation u.v. en milieu aqueux-partie II. Etude cinetique

The decomposition of ClO₂ and ClO₂⁻ by u.v. radiation leads to the production of chlorate, chloride and oxygen as end-products via complex reactions which are initiated by the products generated by the primary reactions of photolysis (Buxton and Subhani, 1972a; Mialocq et al., 1973; Karpel Vel Leitner et al., 1992). As far as the rate of decomposition is concerned, Bowen and Cheung (1932) and Zika et al. (1985) have shown that the quantum yield of photodecomposition of chlorine dioxide (overall reaction) increases when the wavelength decreases [Zika et al. (1985): φ = 0.46 at 366 nm and 1.4 at 296.7 nm]. However, the values of the quantum yield of photodecomposition of ClO₂ and ClO₂⁻ at 253.7 nm as well as the quantum yields for the primary reactions of photolysis of ClO₂ and ClO₂⁻ at different wavelengths are not given in the literature.The aim of this work was to study the kinetics of photodecomposition of chlorine dioxide and of chlorite by u.v. irradiation.