Summation and configuration: Stimulus compounding and negative patterning in the rabbit.

The present experiments were aimed at identifying the interactions among atomistic and configural processes in governing response acquisition to a compound stimulus and its components. To that end, the acquisition of the rabbit's nictitating membrane response was examined in (a) "stimulus compounding," which entailed reinforced training with two separate stimuli—namely a tone and a light—plus tests with a compound of the two stimuli, and (b) "negative patterning," in which reinforced presentations of the separate stimuli were interspersed with a large number of unreinforced compound presentations. In Experiments 1 and 2, stimulus compounding produced summation effects—that is, a higher level of responding to the compound than to either component stimulus. In the negative patterning schedule, responding to the unreinforced compound declined as a direct function of the stimulus duration, which was varied across values of 300, 800, 1,300, and 1,800 ms in a delay conditioning paradigm. Experiment 3 demonstrated that a negative patterning outcome emerged only when the duration of both the components and the compound was relatively long, for example, 1,800 ms. Together the results support a "unique stimulus hypothesis," which contends that responding to a compound is jointly governed by coexisting representations of a compound and its components. Furthermore, the compound representation appears to require more time to recruit than do those of the components. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Overshadowing and summation in compound stimulus conditioning of the rabbit's nictitating membrane response.

Examined acquisition of the rabbit's nictitating membrane response to a light?+?tone simultaneous compound stimulus and its components as a function of the intensity of the tone. In Exp I, the tone intensity was varied across the values of 85, 89, and 93 db, and the CS–UCS interval was 400 msec. In Exp II, the tone intensities were 73, 85, and 93 db, and the CS–UCS interval was 800 msec. Exps III and IV further examined the effects of the 73-db CS–UCS tone at CS–UCS intervals of 400 and 800 msec. All experiments included control groups, which were trained with either a light or a tone CS. Overall results show repeated instances of overshadowing: the impairment of CR acquisition to one or both of the components of a compound. Two types of summation were obtained: within-Ss summation, in which Ss trained with a compound showed a higher level of responding to the compound than to either of its component CSs; and between-groups summation, in which a group trained with a compound showed faster CR acquisition than either of its corresponding control groups trained with a single CS. Results are discussed in terms of perceptual and distributive processing models of compound stimulus conditioning. (37 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Temporal dynamics of the rabbit's nictitating membrane response in serial compound conditioned stimuli.

Two experiments, with 88 female albino rabbits, investigated conditioning of the nictitating membrane response to a reinforced serial compound stimulus. The serial compound was composed of a 400-msec CS (CSA), a trace interval of at least 2 sec, and a brief 2nd CS (CSB) prior to the UCS. The CSB duration was either 150, 250, or 400 msec in Exp I, and the CSB duration in Exp II was 400 msec. Exp I compared serial compound training to an "uncoupled" condition, which contained intermixed CSA–UCS trials and CSB–UCS trials. Exp II compared serial compound training with uncoupled training, 2nd-order conditioning (CSA–CSB/CSB–UCS), trace conditioning (CSA–UCS), and generalization testing that entailed CSB–UCS training and unreinforced tests with CSA. The serial compound, uncoupled, and 2nd-order conditioning procedures all produced high levels of responding during CSA, but only the reinforced serial compound procedure yielded an appreciable likelihood of CR initiation during the trace interval between CSA and CSB. The CRs during the trace interval were temporally distinct from the CRs during CSA and did not appear to be belated CRs to CSA itself. Results are discussed in connection with stimulus selection phenomena, for example, overshadowing and potentiation of toxicosis conditioning. (46 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of agitation, turbidity, aluminium foil reflectors and container volume on the inactivation efficiency of batch-process solar disinfectors

We report the results of experiments designed to improve the efficacy of the solar disinfection of drinking water, inactivation process. The effects of periodic agitation, covering the rear surface of the container with aluminium foil, container volume and turbidity on the solar inactivation kinetics of Escherichia coli (starting population = 10(6) CFU ml(-1)) were investigated. It was shown that agitation promoted the release of dissolved oxygen from water with subsequent decrease in the inactivation rates of E. coli. In contrast, covering the rear surface of the solar disinfection container with aluminium foil improved the inactivation efficiency of the system. The mean decay constant for bacterial populations in foil-backed bottles was found to be a factor of 1.85 (std. dev. = 0.43) higher than that of non-foil-backed bottles. Inactivation rates decrease as turbidity increases. However, total inactivation was achievable in 300 NTU samples within 8 h exposure to strong sunshine. Inactivation kinetics was not dependent on the volume of the water container for volumes in the range 500-1500 ml.     

Hydrogel/bioactive glass composites for bone regeneration applications: Synthesis and characterisation

Due to the deficiencies of current commercially available biological bone grafts, alternative bone graft substitutes have come to the forefront of tissue engineering in recent times. The main challenge for scientists in manufacturing bone graft substitutes is to obtain a scaffold that has sufficient mechanical strength and bioactive properties to promote formation of new tissue. The ability to synthesise hydrogel based composite scaffolds using photopolymerisation has been demonstrated in this study. The prepared hydrogel based composites were characterised using techniques including Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-dispersive X-ray spectrometry (EDX), rheological studies and compression testing. In addition, gel fraction, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), porosity and swelling studies of the composites were carried out. It was found that these novel hydrogel bioglass composite formulations did not display the inherent brittleness that is typically associated with bioactive glass based bone graft materials and exhibited enhanced biomechanical properties compared to the polyethylene glycol hydrogel scaffolds along. Together, the combination of enhanced mechanical properties and the deposition of apatite on the surface of these hydrogel based composites make them an ideal candidate as bone graft substitutes in cancellous bone defects or low load bearing applications.     

Summation and configuration in conditioning of the rabbit's nictitating membrane response to compound stimuli.

Two experiments, with 64 female albino rabbits, examined the acquisition of the nictitating membrane response to a tone plus light compound and its components in (a) compound conditioning (CC), which entailed reinforced presentations of the compound; and (b) stimulus compounding (SCP), which entailed reinforced presentations of the separate components. In CC, responding to the compound reached high levels, but the level of responding on component test trials declined to low levels as the conditioned stimulus (CS)–unconditioned stimulus (UCS) interval was increased. In SCP, there was substantial responding to both components, but all groups showed even higher levels to the compound. In Exp II, Ss received reinforced presentations of the compound and its components in proportions intermediate to those of CC and SCP. Differentiation between the compound and its components increased as the proportion of reinforced compound trials increased. Results are discussed with respect to atomistic summation and to perceptual, distributive, and unique stimulus hypotheses. (42 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Enhanced light extraction in ITO-free OLEDs using double-sided printed electrodes

We show how nanoimprint lithographic techniques are particularly suited for the realization of OLED device structures. We tested them to realize nanopatterned metallic electrodes containing photonic crystals to couple the light out and plasmonic crystals showing extraordinary transmission. At similar current densities, a two-fold electroluminescence is achieved with devices having double-sided structured metallic electrodes as compared to a control OLED with an ITO anode. The use of combined nanoimprint lithography processes has the potential to expand the performance range of various organic optoelectronic devices.     

A Method for Measuring the Thermal Diffusivity of Intermediate Thickness Surface Absorbing Samples and Obtaining the Ratio of Anisotropy by the Converging Wave Flash Method

The converging thermal wave, flash technique for measuring thermal diffusivity is suitable for use on samples that are sufficiently thick or thin in comparison to the annular heat source, to be described by a three-dimensional or two-dimensional approximation of the heat conduction equation, and sufficiently absorbing to ensure generation of a heat source at the surface. However, samples of intermediate thickness, which lie between these regimes, cannot be analyzed. In this article, heat diffusion in the samples of varying thicknesses is modeled, and a semi-analytic expression is used to describe the dimensionality of any thickness, allowing the converging wave method to be extended to intermediate thickness samples. Applying the analysis to anisotropic samples, a method is proposed to find the anisotropy ratio of the in-plane to perpendicular-to-plane diffusivity using the converging wave method.     

Temporally specific extinction of conditioned responses in the rabbit (Oryctolagus cuniculus) nictitating membrane preparation.

Extinguishing a conditioned response (CR) has entailed separating the conditioned stimulus (CS) from the unconditioned stimulus (US). This research reveals that elimination of the rabbit (Oryctolagus cuniculus) nictitating membrane response occurred during continuous CS-US pairings. Initial training contained a mixture of 2 CS-US interstimulus intervals (ISIs): 200 ms and 1,200 ms. The CRs showed double peaks, one for each ISI. When 1 ISI was removed, its CR peak showed the hallmarks of extinction: a decline across sessions, spontaneous recovery between sessions, and rapid reacquisition when the absent ISI was reintroduced. These results support real-time models of conditioning that segment the CS into microstimuli while challenging theories that rely on contextual control, US representations, CS processing, and response inhibition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of a Novel Functional Soup Rich in Bioactive Sulforaphane Using Broccoli (Brassica oleracea L. ssp. italica) Florets and Byproducts

Broccoli florets are rich in health-promoting compounds such as glucoraphanin, the precursor of the bioactive compound sulforaphane. In addition, broccoli byproducts such as stalk also contain health-promoting compounds and represent attractive ingredients in the development of functional foods. The bioconversion of glucosinolates into bioactive isothiocyanates is affected by many factors including heat and therefore cooking of Brassica such as broccoli may result in significant loss of sulforaphane production. The aim of this study was to develop a suitable food system as a vehicle for the delivery of sulforaphane in the human diet in adequate quantities. To this end, the feasibility of dry-mix ready soup as a food matrix for the delivery of broccoli floret and byproducts was evaluated. In particular, this study investigated the bioconversion of glucosinolates into bioactive isothiocyanates during the cooking process of this novel food product by microwave heating. In addition to total isothiocyanate and sulforaphane content, other key physical and biochemical quality attributes of the broccoli floret- and byproduct-enriched soups were investigated. Total isothiocyanate and sulforaphane content in floret- and stalk-enriched soups was high in both cases and increased in the order stalk<floret. The overall acceptability of stalk containing soups was not significantly different compared with the control soups, whereas floret containing soups received significantly lower acceptability scores. These results suggest that ready soups prepared by microwave heating represent a feasible food product for the delivery of broccoli florets and byproducts which is compatible with the bioconversion of glucosinolates into bioactive isothiocyanates.