Bibliometric analysis of tsunami research

The use of the bibilometric analytical technique for examining tsunami research does not exist in the literature. The objective of the study was to perform a bibliometric analysis of all tsunami-related publications in the Science Citation Index (SCI). Analyzed parameters included document type, language of publication, publication output, authorship, publication patterns, distribution of subject category, distribution of author keywords, country of publication, most-frequently cited article, and document distribution after the Indonesia tsunami. The US and Japan produced 53% of the total output where the seven major industrial countries accounted for the majority of the total production. English was the dominant language, comprising 95% of articles. A simulation model was applied to describe the relationship between the number of authors and the number of articles, the number of journals and the number of articles, and the percentage of total articles and the number of times a certain keyword was used. Moreover the tsunami publication patterns in the first 8 months after the Indonesia tsunami occurred on 26 December 2004 indicated a high percentage of non-article publications and more documents being published in journals with higher impact factors.     

Psychological impact of colorectal cancer screening.

This article examines the psychological impact of participating in sigmoidoscopy screening for colorectal cancer prevention. The 1st study examined psychological well-being at 3 months, in relation to screening outcome, in 4,153 individuals. The 2nd study used longitudinal data to examine changes in psychological functioning from before to after screening in relation both to screening outcome and baseline indicators of vulnerability. There were few psychological differences between those who had received negative results or had polyps detected. These findings were confirmed in the longitudinal study, which also found no evidence for vulnerability to adverse effects among those who were initially most anxious or who perceived their risk of cancer to be higher. The longitudinal data suggested that screening might produce transient positive effects. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

WLAN chip antenna mountable above the system ground plane of a mobile device

A novel wireless local-area network (WLAN) chip antenna suitable to be mounted above the system ground plane of a mobile device is presented. The antenna in the study is easily fabricated from folding a single metal plate onto a foam base, and mainly comprises a short-circuited radiating strip and an antenna ground. The antenna ground occupies the bottom surface and two adjacent side surfaces of the foam base. When the antenna is mounted at the corner of the system ground plane, this antenna ground structure is expected to effectively reduce the antenna's possible fringing electromagnetic fields inside the mobile device. In this case, when the associated element such as the radio-frequency shielding metal case is placed under the proposed antenna, small or negligible variations in the antenna performance are obtained. Design considerations of the proposed antenna for WLAN operation in the 2.4 GHz band are described, and results of the constructed prototypes are presented.     

Surface-mount dual-loop antenna for 2.4/5 GHz WLAN operation

A surface-mount dual-loop antenna suitable for dual-frequency WLAN operation is presented. For achieving dual-frequency operation with a compact size, the antenna comprises two loop strips of different sizes printed on a flexible printed circuit board, which is then bent and attached onto a foam base of compact size. The antenna shows an attractive feature of high antenna gain, about 4 and 5 dBi for frequencies across the 2.4 and 5 GHz WLAN bands, respectively.     

Hydrogenated amorphous silicon thin-film transistor arrays fabricated by digital lithography

A jet-printed digital-lithographic method, in place of conventional photolithography, was used to fabricate 64 /spl times/ 64 pixel (300 /spl mu/m pitch) matrix addressing thin-film transistor (TFT) arrays. The average hydrogenated amorphous silicon TFT device within an array had a threshold voltage of /spl sim/3.5 V, carrier mobility of 0.7 cm/sup 2//V/spl middot/s, subthreshold slope of 0.76 V/decade, and an on/off ratio of 10/sup 8/.     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

Pile Response Adjacent to Braced Excavation

The excavation of soil for the construction of basements or cut-and-cover tunnels results in ground movements. One particular concern is that the excavation-induced lateral soil movements may adversely affect any nearby pile foundation. The lateral loads imposed by the soil movements induce bending moments and deflections in the pile, which may lead to structural distress and failure. This paper presents the results of an actual full-scale instrumented study that was carried to examine the behavior of an existing pile due to nearby excavation activities resulting from the construction of a 16 m deep cut-and-cover tunnel. The pile was located 3 m behind a 0.8 m thick diaphragm wall. Excavation to the formation level that was 16 m below the ground surface resulted in a maximum lateral pile movement of 28 mm. A simplified numerical procedure based on the finite-element method was used to analyze the pile response. Generally, the theoretical predictions were in reasonable agreement with the measured results.     

Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment

A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.