Evaluation of hydroxylapatite/poly(l-lactide) composites: physico-chemical properties

The aim of this in vitro study was to examine the physico-chemical behaviour of hydroxylapatite/poly(l-lactide) (HA/PLLA) composites in solution tests. The polymer PLLA, the composites 30 wt% HA/PLLA (C30) and 50 wt% HA/PLLA (C50) and a one-side HA-coated PLLA (HAcP) were evaluated. Rectangular specimens were incubated in various acellular aqueous buffer solutions [citrate, Gomori's and phosphate-buffered saline (PBS)] up to 24 weeks. Data for cumulative release of calcium, phosphate and l-lactate release in solutions containing C30 or C50 showed linear patterns. Release data for solutions containing HAcP combined with scanning micrographs, X-ray microanalysis and X-ray diffraction patterns of the specimens in time showed that the plasma-sprayed HA coating on PLLA dissolves significantly, progressively in the first weeks and almost completely within the tested period of 24 weeks in vitro. A precipitate of scaly crystallites (calcium phosphates) was observed at the HA coating-PBS interface. After 24 weeks incubation all materials were still above their initial weight, indicating that swelling still exceeded dissolution. Application of C30, C50 and HAcP as implant materials seems interesting where initial stabilization through bone bonding is needed or where the linear release of constituents is a requirement. HAcP has the advantage that the HA coating acts as a hydrolysis barrier and consequently delays the degradation of PLLA in vitro.     

Pig heart fumarase contains two distinct substrate-binding sites differing in affinity

A eukaryotic fumarase is for the first time unequivocally shown to contain two distinct substrate-binding sites. Pig heart fumarase is a tetrameric enzyme consisting of four identical subunits of 50 kDa each. Besides the true substrates L-malate and fumarate, the active sites (sites A) also bind their analogs D-malate and oxaloacetate, as well as the competitive inhibitor glycine. The additional binding sites (sites B) on the other hand also bind the substrates and their analogs D-malate and oxaloacetate, as well as L-aspartate which is not an inhibitor. Depending on the pH, the affinity of sites B for ligands (Kd being in the millimolar range) is 1-2 orders of magnitude lower than the affinity of sites A (of which Kd is in the micromolar range). However, saturating sites B results in an increase in the overall activity of the enzyme. The benzenetetracarboxyl compound pyromellitic acid displays very special properties. One molecule of this ligand is indeed able to bind into a site A and a site B at the same time. Four molecules of pyromellitic acid were found to bind per molecule fumarase, and the affinity of the enzyme for this ligand is very high (Kd = 0.6 to 2.2 microM, depending on the pH). Experiments with this ligand turned out to be crucial in order to explain the results obtained. An essential tyrosine residue is found to be located in site A, whereas an essential methionine residue resides in or near site B. Upon limited proteolysis, a peptide of about 4 kDa is initially removed, probably at the C-terminal side; this degradation results in inactivation of the enzyme. Small local conformational changes in the enzyme are picked up by circular dichroism measurements in the near-UV region. This spectrum is built up of two tryptophanyl triplets, the first one of which is modified upon saturating the active sites (A), and the second one upon saturating the low affinity binding sites (B).     

Insertional re-activation of a chloramphenicol acetyltransferase misfolding mutant protein

The deletion of nine residues from the C-terminus of the bacterialchloramphenicol acetyltransferase (CAT) results in depositionof the mutant protein in cytoplasmic inclusion bodies and lossof chloramphenicol resistance in Escherichia coli. This foldingdefect is relieved by C-terminal fusion of the polypeptide withas few as two residues. Based on these observations, efficientpositive selection for the cloning of DNA fragments has beendemonstrated. The cloning vector encodes a C-terminally truncatedCAT protein. Restriction sites in front of the stop codon allowthe insertion of target DNA, resulting in the production ofproperly folded CAT fusion proteins and regained chloramphenicolresistance. The positive selection of recombinants is accomplishedby growth of transformants on chloramphenicol-containing agarplates. The method appears particularly convenient for the cloningof DNA fragments amplified by the PCR because minimal informationto restore CAT folding can be included in the primers. The cloningof random sequences shows that the folding defect can be relievedby fusion to a wide variety of peptides, providing great flexibilityto the positive selection system. This vector may also contributeto the determination of the role of the C-terminus in CAT folding.     

Unexplained physical symptoms: outcome, utilization of medical care and associated factors

BACKGROUND: Measurement of intracardiac hemodynamic parameters has been limited to brief periods in the acute care setting. We developed and evaluated an implantable hemodynamic monitor that is capable of measuring chronic right ventricular oxygen saturation and pulmonary artery pressure. METHODS AND RESULTS: The device consists of an electronic controller placed subcutaneously and two transvenous leads placed in the right ventricle (reflectance oximeter) and pulmonary artery (variable capacitance pressure sensor). Implantation was performed in 10 patients with severe left ventricular dysfunction. Average implant pulmonary artery pressures were systolic, 52 +/- 16 mm Hg; diastolic, 29 +/- 11 mm Hg; and mean, 40 +/- 12 mm Hg. The mean right ventricular oxygen saturation at implant was 51%. Provocative maneuvers, including postural changes, sublingual nitroglycerin, and bicycle exercise, demonstrated expected changes in measured oxygen saturation and pulmonary artery pressures over time. At follow-up of 0.5 to 15.5 months, there were no significant differences between pulmonary artery pressures or oxygen saturation values transmitted from the device and simultaneous measurement with balloon flotation catheters. Four of the pulmonary artery leads dislodged and three demonstrated sensor drift, whereas two of the oxygen saturation sensors failed. Four patients died and four received transplants. Pathological study did not demonstrate injury to the right ventricular outflow tract or pulmonic valve. CONCLUSIONS: Chronic measurement of hemodynamic parameters in the outpatient setting with implantable sensor technology appears to be feasible. The devices are well tolerated without significant untoward effects, and the sensors generally function well over time, providing reliable information. Clinical usefulness remains to be established.     

Analysis of viscoelastic laminated composite plates

A micromechanics analysis is performed for the determination of the five independent elastic moduli of unidirectional fiber composites. By considering viscoelastic phases and by using the correspondence principle and the inversion of the Laplace transform, the five time-dependent functions which characterize the effective behavior of viscoelastic composites are established. The predicted time-dependent behavior is applied for the analysis of viscoelastic laminated plates. The resulting viscoelastic effects are shown, and comparison between the results obtained within the classical laminated plate theory and the first-order shear deformation theory is discussed.     

Synthesis of N,N-diethyl-N-{4-[(E)-(4-nitrophenyl)diazenyl]phenyl}amine via in situ diazotisation and coupling in supercritical carbon dioxide

The synthesis of azo dyes via a conventional aqueous-based diazotisation and coupling reaction requires the use of relatively high concentrations of mineral acids, which leads to high electrolyte concentrations in wastewater. Reported in this paper is an environmentally benign one-pot method for the synthesis of a nonionic azo dye, N,N -diethyl- N -{4-[( E )-(4-nitrophenyl)diazenyl]phenyl}amine, in supercritical carbon dioxide without using a mineral acid. The product yield increased significantly with temperature, with 91% theoretical yield afforded at 80 °C. The pressure of the system had little influence on product yield.     

Measurement of Gibbs energies of formation of CoF2 and MnF2 using a new composite dispersed solid electrolyte

Gibbs energies of formation of CoF₂ and MnF₂ have been measured in the temperature range from 700 to 1100 K using Al₂O₃-dispersed CaF₂ solid electrolyte and Ni+NiF₂ as the reference electrode. The dispersed solid electrolyte has higher conductivity than pure CaF₂ thus permitting accurate measurements at lower temperatures. However, to prevent reaction between Al₂O₃ in the solid electrolyte and NiF₂ (or CoF₂) at the electrode, the dispersed solid electrolyte was coated with pure CaF₂, thus creating a composite structure. The free energies of formation of CoF₂ and MnF₂ are (± 1700) J mol⁻¹; {fx37-1} The third law analysis gives the enthalpy of formation of solid CoF₂ as ΔH° (298·15 K) = −672·69 (± 0·1) kJ mol⁻¹, which compares with a value of −671·5 (± 4) kJ mol⁻¹ given in Janaf tables. For solid MnF₂, ΔH°(298·15 K) = − 854·97 (± 0·13) kJ mol⁻¹, which is significantly different from a value of −803·3 kJ mol⁻¹ given in the compilation by Barinet al.     

Development of an Enzymic Time Temperature Integrator for Sterilization Processes Based on Bacillus licheniformis α-amylase at Reduced Water Content

ABSTRACT: The thermal stability of Bacillus licheniformis α-amylase at low moisture content was studied, based on isothermal experiments performed in a temperature range 113 to 125 °C. The thermal inactivation was monitored by measuring the decrease in thermal denaturation enthalpy and/or the decrease in enzymic activity on pnitrophenyl-α-D-maltoheptaoside, or on starch as a substrate. Based on enthalpy readings, an enzymic system with a z-value of 10.4 °C was observed when using a relative humidity of 81% at 4 °C. A theoretical study showed that this system could be used as a Time Temperature Integrator (TTI) to monitor the safety of sterilization processes of numerous food products.     

Formation of linear aldehydes during surface water preozonization and their removal in water treatment in relation to mutagenic activity and sum parameters

Low molecular weight aldehydes were formed during surface water preozonization, their levels showing a positive correlation with increasing ozone dose applied and with increasing water temperature. A strong negative correlation was observed between aldehyde levels and U.V. absorbance at 254 nm.Coagulation had no influence on the aldehydes present and the influence of rapid double layer filtration varied strongly with temperature : significant removals were only observed above 10°C.Mutagenic activity generated by preozonization in Salmonella typhimurium TA98 shows an ozone dose depending relationship different from the formation of linear aldehydes. Its removal by coagulation is not effective but rapid double layer filtration reduces mutagenic activity to marginal levels.In this respect too no clear parallel can be drawn between the presence of low molecular weight aldehydes and mutagenic activity.