Biologically active secondary metabolites of barley. IV. Hordenine production by different barley lines

Forty-three lines of barley, including ancestral (wild), landraces, Middle Eastern lines, and modern cultivars, were grown under two different sets of environmental conditions. Hordenine production in barley roots was determined at the one-leaf stage by HPLC analysis and, in two lines only, over a period of 35 days. Forty-two of the 43 lines produced significant amounts of hordenine, although there was no variation among groups. Middle Eastern lines had the highest production with 327 µg/g on a dry weight basis. Production was, however, determined more by environmental conditions during growth than by genetic factors. Hordenine production was up to seven times higher in plants grown under lower light intensities.     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Children, robotics, and education

Popular interest in robotics has increased astonishingly in the last few years. Robotics is seen by many as offering major new benefits in education at all levels. Before rushing to exploit this popularity, educators should ask serious questions about the universality and longevity of the robotics phenomenon. Is it a fashion? To be useful, the energy released by robotics must be sustained and universal, and the means of exploiting it must be systematic. Universities define their own robotics curriculum, but most schools lack both the resources and the freedom to do this, and must work with a national curriculum. If it can be shown that robotics has sustained potential in education, it seems inevitable that new ways need to be found to integrate it into the school curriculum.     

Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

A Daily Diary Validity Test of Drinking to Cope Measures.

Data from 2 daily diary studies of stress, negative affect, and drinking were used to examine the correspondence between global self-reports of drinking to cope (DTC) and within-person stress/negative affect-drinking associations. In Study 1, 83 community-residing drinkers recorded data in nightly booklets on negative events, perceived stress, negative affect, and drinking for 60 consecutive days. In Study 2, 88 community-residing drinkers recorded data on negative events and negative interpersonal exchanges nightly and negative affect and drinking in near-real time on palmtop computers for 30 consecutive days. Both studies showed only modest correspondence between self-reported DTC and between-person differences in within-day, daily, and weekly associations between stress/negative affect and drinking. The findings indicate that individuals who report higher DTC simply may drink across a wider variety of conditions than those who report relatively lower DTC. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Talking About Meter in SGML

This paper describes an encoding for representing quantitativemetrical analyses in TEI SGML or XML documents, using only charactersfrom the standard keyboard set, and a system for converting thisencoding to other forms for display.     

SMC composites waste management as reinforcing fillers in polypropylene by combination of mechanical and chemical recycling processes

A new process of management of waste of composite materials from Sheet Moulding Compounds (SMC), as reinforcing fillers for thermoplastic materials, including both mechanical and chemical processes is proposed in this paper. Communited SMC being composed of coated glass fibres intimately mixed with calcium carbonate powder, their reinforcing power is low. First, the fibrous part was increased by partial dissolution of calcium carbonate present in the crushed products SMC. Second, a process of partial solvolysis was developed aiming at strong increasing the interfacial mechanical properties by functionalising of SMC load incorporated into polypropylene/grafted maleic anhydride polypropylene (PP/PP_gma). At this effect, we investigated a treatment with a hot triamine (diethylenetriamine, DETA) in order to create a functionalisation, after scission of the bond ester of unsaturated polyester, as bridging amino-succinimide.The effect of this recycling way by partial solvolysis was checked from the mechanical properties of the resulting reinforced PP/PP_gma material: Although a lower of Young modulus, better yield stress and especially resilience were observed.     

Tilted superlattice composition profile determined by photoluminescence and thermal disordering

The composition profile of an (AlAs)_1/2(GaAs)_1/2 tilted superlattice is characterized for the first time. The tilted superlattice sample is thermally disordered, and the energy of the direct band gap photoluminescence peak is measured as a function of increasing layer interdiffusion. The shift in the photoluminescence peak energy after completely disordering the tilted superlattice is 39 meV. A theoretical model is used to simulate the change in band gap as a function of layer interdiffusion for several composition profiles. The profile that gives the best fit to the experimental data is chosen. The tilted superlattice composition profile is found to be sinusoidal, varying from Al_0.40Ga_0.60As to Al_0.60Ga_0.40As.