Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind

Nowadays different kinds of double-skin facades are developed and used in new architectural projects. The aim of these facades is, on the one hand, to increase internal comfort and, on the other hand, to decrease energy consumption. In order to optimise the overall performance of the double-skin façades, their detailed behaviour needs to be better understood. The prediction of the airflow within the channel (between the two glazings) is very important for understanding of the double-skin facades behaviour, especially in summer conditions. A comprehensive modelling of a compact double-skin facade equipped with a venetian blind and forced ventilation is proposed here. The modelling is done using the CFD (computational fluid dynamics) approach to assess the air movement within the ventilated facade channel. Three-dimensional airflow is modelled using a homogeneous porous media representation, in order to reduce the size of the mathematical model. A parametric study is proposed here, analysing the impact of three parameters on the airflow development: slat tilt angle, blind position and air outlet position. The distance between the blind and the external glazing was found to have a major impact on the velocity profiles inside the double-skin facade channel.     

An Analytical Solution to Circular Touch Mode Capacitor

In this paper, a simple but accurate analytical solution is presented to model the flexion of a circular diaphragm with clamped edges under an uniform load. The touch down effect and the evolution of touch radius are considered in this model, making it useful for touch down capacitor devices such as pressure sensors. This model is then compared to results obtained from Coventor, a finite elements analysis program designed for microelectromechanical systems     

Slip and Twinning in Polycrystalline Alumina (α-Al2O3) Deformed under Hydrostatic Pressure between 600° and 1000°C

The microstructure of polycrystalline alumina deformed under hydrostatic pressure and at low temperature is investigated by transmission electron microscopy. Deformation occurs mainly by prism plane slip and rhombohedral twinning. Introduction of hydrogen leads to a significant decrease in the yield stress. In large grain size alumina deformed with hydrogen, accommodation of twinning involves dislocation reactions in the twin boundary and in the grains rather than by cracking. Prism plane dislocations decompose into basal dislocations by cross slip probably due to a decrease of Peierls stress for basal slip in the presence of hydrogen.     

Evolution granulométrique des sols sablo-argileux soumis à des compactages dynamique et statique

The compaction of a quartz sand by the modified Proctor test involves the production of fines produced by the breaking of the grains of the sand. This production of fines is measured by the grain size analysis before and after compaction. The adding of clay to the sand diminishes the evolution of the grain size. The process is proportional to the quantity of clay added to the sand. If the dynamic compaction of the Proctor test is substituted by the static compaction, one notes the same occurrences: static or dynamic compaction breaks the grains of sand and the clay added to the sand protects the grains from the breaking induced by the compaction stresses.     

Antral gastritis in chronic alcoholism. Role of cirrhosis and Helicobacter pylori

OBJECTIVES: Antral gastritis is frequent in alcoholics. The role of H. pylori in the pathogenesis of gastritis in these patients is not well known. The aim of our study was to study the role of H. pylori and cirrhosis in the pathogenesis of antral gastritis in alcoholic patients. METHODS: Seventy-nine patients were included in the study. All underwent upper gastrointestinal tract endoscopy with antral biopsies, independently of the presence of abdominal pain, and had serological examination for H. pylori antibodies. RESULTS: Cirrhosis and gastritis were present in 50 and 40 patients respectively, H. pylori serological assay and histological identification of the bacterium were positive in 35 (44%) and 19 (24%) patients respectively. Discrepancy between the 2 tests were observed more frequently in cirrhotic patients. A positive serology with a negative histologic examination for H. pylori was present for 18 cirrhotic and 4 noncirrhotic patients (p < 0.05). A gastritis without evidence of H. pylori was more frequent in cirrhotic than in noncirrhotic patients. H. pylori was histologically present in 11 of 29 cirrhotic patients and in 8 of the 11 noncirrhotic patients with a gastritis (p < 0.05). CONCLUSIONS: Discrepancies between histological examination and H. pylori serology in patients with cirrhosis might be due to the inhospitable environment for H. pylori in case of portal hypertension; the positive serology could be in relation with a past infection.     

Determination of tryptophan in feedstuffs: Comparison of two methods of hydrolysis prior to HPLC analysis

The tryptophan content of nine samples of commercial feed was determined using two procedures (I and II) differing mainly in the hydrolysis conditions used prior to analysis. With I, hydrolysis was performed with 4 M LiOH in the presence of maltodextrin with 5-methyltryptophan used as internal standard at 110°C for 24 h; with II. oxygen-free 1.3 M Ba(OH)₂ was used at 125°C for 16 h. The two procedures gave identical results for a given sample indicating that the corrections for the incomplete recovery of tryptophan 5-methyltryptophan quantitation were satisfactory.     

Software tools for micro-analysis of programs

The paper proposes and describes several tools enabling their user to estimate the efficiency of Pascal or C-like programs. The approach consists of generating symbolic formulas expressing the efficiency of the programs being analyzed. The formulas are applicable to a variety of compiler-machine configurations. The actual numeric values of the variables in the symbolic formula are determined using linear programming techniques. The proposed approach reduces considerably the amount of benchmarking needed to analyze programs. Several examples are presented showing the applicability of the tools. The effort necessary to implement them is considerably reduced by the combined usage of Prolog and a symbolic formula manipulation package (Maple).     

GC/MS characterization of mate tea leaves extracts obtained from high-pressure CO2 extraction

This work presents a study concerning the chemical characteristics and analytical separation process of the essential oil obtained from high-pressure carbon dioxide extraction of Ilex paraguariensis. The experiments were performed in a laboratory-scale unit in the temperature range of 20–40 °C, from 100 to 250 bar. A blend of the I. paraguariensis extracts was percolated through a preparative chromatographic column, containing silica gel, and successively eluted with 150 mL of each of the following solvents: hexane, toluene, dichloromethane, ethyl acetate, acetone and methanol. The raw extract and its fractions were analyzed by gas chromatography coupled to mass spectrometry detection (GC/MS). The fractionation procedure showed to be a good clean up technique due to the isolation of different classes of compounds in each fraction. Chromatographic analyses allowed the identification of caffeine, fatty acids and esters, phytol, squalene, Vitamin E, stigmasterol derivatives and saturated hydrocarbons.     

Ground state systematics and collective dipole excitations of spheroidally deformed sodium clusters in a diffuse jellium model

We solve the Kohn-Sham equations self-consistently in the local density approximation for spheroidal sodium clusters in the particle range 8 ≤ Z ≤ 40. We use a smooth fermi-like jellium density to simulate the influence of the ions in the surface region and obtain similar results as Ekardt and Penzar, but slightly different regions of prolate-to-oblate transitions. We present the systematics of potential energy curves with respect to transitions between oblate, prolate and spherical shapes. Shape transitions occur at particle numbers 12/14 (prolate/oblate), 18/20/22 (oblate/spherical/prolate) and 30/32 (prolate/oblate), which are in good agreement with experimental results. The quadrupole and hexadecupole overlap of the electron density with the jellium is investigated, showing a strong hexadecupole dependence for selected clusters. Collective dipole resonances are described in a simple sum rule approach, which reveals a double splitting according to the different resonance frequencies along the principal axes of the spheroid. The systematics of the resonance peaks for the larger clusters with Z ≥ 20 is in good agreement with experimental results.