Combined Ozone Pretreatment and Anaerobic Digestion for the Reduction of Biological Sludge Production in Wastewater Treatment

The ever-increasing amount of solid waste generated by wastewater treatment plants highlights emerging economic and environmental issues. In order to develop new processes producing less sludge, the use of ozone combined with anaerobic digestion was investigated for waste activated sludge treatment. This paper was aimed at evaluating the impact of ozone pretreatment on anaerobic digestion and particularly the enhancement of biogas production. Sludge solubilization was estimated in terms of modification of chemical oxygen demand, solids and nitrogen. Batch anaerobic digestion highlighted the enhancement of ozonated sludge biodegradability. Ozonation led to an increase in biogas production. The ozone dose of 0.15 g O₃/g total solids resulted in a considerable increase in the soluble COD ratio from 4% to 37%. This ozone dose achieved the highest increase in biogas production: 2.4 times greater than without chemical pretreatment.     

Characterization of bimetallic NaY-supported Pt-Pd catalyst by EXAFS,TEM and TPR

NaY-supported bimetallic Pt-Pd catalysts have been studied by TEM, TPR and EXAFS. Small, randomly mixed particles are formed in the zeolite cages. When the Pt content is increased, a Pt core structure appears and the dispersion increases. Particle diameters are about 1–2 nm for bimetallic samples.     

Ice sheet survey over Antarctica using satellite altimetry: ERS-2, Envisat,SARAL/AltiKa,the key importance of continuous observations along the same repeat orbit

From September 2002 to October 2010, the Envisat radar altimeter surveyed Greenland and Antarctica ice sheets on a 35 day repeat orbit, providing a unique data set for ice sheet mass balance studies. Up to 85 repeat cycles are available and the whole Envisat data set may be along-track processed in order to provide height variability and trend with a good spatial resolution for the objectives of ice sheet survey.

Soon, a joint Centre National d’Etudes Spatiales/Indian Space Research Organisation mission, SARAL (Satellite with Argos and AltiKa), with the AltiKa payload on board, will be launched on exactly the same orbit (less than 1 km of the nomimal orbit in the across-track direction). This will allow an extension of previous European Remote Sensing (ERS) satellite, ERS-1 and ERS-2, and Envisat missions of the European Space Agency (ESA), in particular from the point of view of ice altimetry. However, AltiKa operates in the Ka band (36.8 GHz), a higher frequency than the classical Ku band (13.6 GHz), leading to important modifications and potential improvements in the interactions between radar wave and snow-pack.

In this paper, a synthesis is presented of all available information relevant to ice altimetry scientific purposes as derived from the Envisat mission: mean and temporal derivatives of the height ? but also of the backscatter and of the two waveform parameters ? snow-pack change corrections, across-track surface slope at 1 km scale, etc. The spatial and temporal variability of ice sheet surface elevation is investigated with the help of the high-resolution Envisat along-track observations. We show that at least 50 repeat cycles are needed to reach the required accuracy for the elevation trend. It is thus advocated as potentially highly beneficial for SARAL/AltiKa as a follow-on mission. Moreover, the novel characteristics of SARAL/AltiKa are promising in improving our understanding of snow penetration impact.     

Formal verification of collaboration patterns in healthcare

We propose a computer-based framework for the formal verification of collaboration patterns in healthcare teams. In this, the patterns are constructed diagrammatically as compositions of keystones that are viewed as abstract processes. The approach provides mechanisms for ensuring that safety properties are enforced and exceptional events are handled systematically. Additionally, a fully verified, executable model is obtained as an end product, enabling a simulation of its associated collaboration scenarios.     

Synthesis and characterization of polyethylene-like polyurethanes derived from long-chain, aliphatic α,ω-diols

Long-chain aliphatic α,ω-diols containing up to 32 consecutive methylene groups were synthesized by several methods and characterized. 1,22-Docosanediol HO-(CH₂)₂₂-OH and 1,32-dotriacontanediol HO-(CH₂)₃₂-OH both exhibited a solid-solid phase transition before melting. The α,ω-diols HO-(CH₂)_m-OH, where m=12, 22, or 32, were reacted in the melt with much shorter aliphatic α,ω-diisocyanates OCN-(CH₂)_n-NCO, where n=4, 6, 8, or 12, producing a series of linear, aliphatic, and increasingly polyethylene-like m,n-polyurethanes. Characterization (by DSC, TGA, and SAXS) of the m,n-polyurethane series showed that when the aliphatic segments were increased, and the hydrogen-bonding densities thus decreased, the polymers displayed physical and thermal properties (for example, solubility and melting temperature) typical of polyethylene.     

Identification of leek-moth and diamondback-moth frass volatiles that stimulate parasitoid,Diadromus pulchellus

Acrolepiopsis assectella andPlutella xylostella frass volatiles, trapped on Tenax GC, were examined by capillary gas chromatography. In both moths, the same three disulfides, dimethyl, dipropyl, and methyl propyl, were the most abundant substances, but in different proportions. The synthetic disulfides elicited the same behavioral response by the parasitoid,Diadromus pulchellus as frass. The plant origin of these substances is discussed.     

Sodium Coordination Environments in Silica Films

The local structure centered on sodium after diffusion in silica (Na-SiO₂ samples) has been determined by means of extended X-ray absorption fine structure (EXAFS) studies. The Na-SiO₂ samples are of particular interest because (i) their sodium content can be varied over a wide range of concentration and (ii) their local structure is representative of that of soda–silica glass. EXAFS analyses reveal the existence of a well-defined local structure involving oxygen, sodium, and silicon neighbors. The Na-O, Na-Na, and Na-Si bonds lengths, which amount to 0.23, 0.30, and 0.38 nm, respectively, do not depend on sodium concentration. This environment closely resembles that found in soda–silica glass. Moreover, it is compatible with the "target site" and "the site memory effect" suggested by recent theories of the ionic conductivity in oxide glasses.     

Surface plasmon resonance evaluation of various aminoglycoside-RNA hairpin interactions reveals low degree of selectivity

Aminoglycoside antibiotics, which are able to selectively bind to RNA, are considered to be an important lead in RNA-targeting drug discovery. In this study, surface plasmon resonance (SPR) was employed to explore the interaction of aminoglycosides with known tobramycin-binding RNA hairpins (aptamers) and an unrelated RNA hairpin. It was established that aminoglycosides have multiple interactions with RNA hairpins. Unexpectedly, the different hairpins showed comparable affinity for a set of related aminoglycosides. The observed absence of selectivity presents an extra hurdle in the discovery of novel aminoglycosides as specific drugs that target defined RNA hairpins.     

A preemptive bound for the Resource Constrained Project Scheduling Problem

The Resource Constrained Project Scheduling Problem is one of the most intensively investigated scheduling problems. It requires scheduling a set of interrelated activities, while considering precedence relationships, and limited renewable resources allocation. The objective is to minimize the project duration. We propose a new destructive lower bound for this challenging ${\mathcal {NP}}$ -hard problem. Starting from a previously suggested LP model, we propose several original valid inequalities that aim at tightening the model representation. These new inequalities are based on precedence constraints, incompatible activity subsets, and nonpreemption constraints. We present the results of an extensive computational study that was carried out on 2,040 benchmark instances of PSPLIB, with up to 120 activities, and that provide strong evidence that the new proposed lower bound exhibits an excellent performance. In particular, we report the improvement of the best known lower bounds of 5 instances.     

A new test for cleaning efficiency assessment of cleaners for hard surfaces

A new test was developed to assess the efficiency of no-wiping hard-surface cleaning. The test allows cleaner comparisons according to their ability to remove greasy soils. The chosen approach minimizes the mechanical forces applied while cleaning so that the interactions between a detergent solution and the soil to be removed can be characterized. For this, immersion cleaning was chosen, with coated stainless steel as substrate and pigmented oils as the model soil. Several parameters were studied in defined ranges using the Experimental Design method and systematic comparisons. The test shows high reliability on degreasing assessments and is there-fore especially suited to optimization of nonionic surfactant mixes. The originality of the test lies in the possibility of keeping a visual trace of the cleaned substrate appearance by imprinting it on a piece of paper. The validation of the test leads to corroboration of several practical observations. Temperature and agitation play a major role in cleaning efficiency. Detergent solution concentration is a more relevant parameter than pH. Sodium carbonate is shown to have a higher buffering effect than pentahydrated sodium metasilicate. The test is easy to set up, highly sensitive, and can be adapted to solve the problems encountered by formulators of detergent cleaners, such as screening the best ethoxylated fatty alcohol mix for better degreasing properties.