Synthesis and characterization of polyethylene-like polyurethanes derived from long-chain, aliphatic α,ω-diols

Long-chain aliphatic α,ω-diols containing up to 32 consecutive methylene groups were synthesized by several methods and characterized. 1,22-Docosanediol HO-(CH₂)₂₂-OH and 1,32-dotriacontanediol HO-(CH₂)₃₂-OH both exhibited a solid-solid phase transition before melting. The α,ω-diols HO-(CH₂)_m-OH, where m=12, 22, or 32, were reacted in the melt with much shorter aliphatic α,ω-diisocyanates OCN-(CH₂)_n-NCO, where n=4, 6, 8, or 12, producing a series of linear, aliphatic, and increasingly polyethylene-like m,n-polyurethanes. Characterization (by DSC, TGA, and SAXS) of the m,n-polyurethane series showed that when the aliphatic segments were increased, and the hydrogen-bonding densities thus decreased, the polymers displayed physical and thermal properties (for example, solubility and melting temperature) typical of polyethylene.     

Specificity studies of bacillus 1,3-1,4-beta-glucanases and application to glycosynthase-catalyzed transglycosylation

Bacillus 1,3-1,4-beta-glucanases hydrolyze 1,3-1,4-beta-gluco-oligosaccharides with a retaining mechanism. The binding-site cleft of these endoglycosidases is composed of six subsites (-4 to +2) of which subsite -3 makes the largest contribution to transition state stabilization. The specificity of this subsite is here analyzed for both glycosidase and glycosynthase activities in the wild-type and the nucleophile-less E134A mutant Bacillus licheniformis enzymes. A D-galactosyl residue on the nonreducing end of a trisaccharide substrate is accepted by the enzyme and binds at subsite -3 in the productive enzyme-substrate complex. The wild-type enzyme catalyzes the hydrolysis of the substrate Glcbeta4Glcbeta3GlcbetaMU (Glc=glucosyl, MU=4-methylumbelliferyl) with a k(cat)/K(M) value only 1.3-fold higher than for the Galbeta4Glcbeta3GlcbetaMU (Gal=galactosyl) substrate. The corresponding alpha-fluorides act as good donors for the glycosynthase condensation reaction with mono- and disaccharide acceptors catalyzed by the E134A mutant. Whereas self-condensation and elongation products are also obtained as minor compounds with the Glcbeta4Glcbeta3GlcalphaF donor, nearly quantitative yields of single condensation products are obtained with the Galbeta4Glcbeta3GlcalphaF donor, in which the axial configuration of the 4-OH group on the nonreducing end prevents self-condensation and elongation reactions.     

Effect of Water on the Partial Oxidation of Propane to Acrylic and Acetic Acids on Mo-V-Sb-Nb Mixed Oxides

It is shown that the major effect of water in the oxidation of propane to acrylic and acetic acids on Mo₁V_0.3Sb_0.25Nb_0.08O _n catalysts is to stabilise the active sites and increase the rates of formation of both acids. The usual effect of favoring desorption of the products is considered to be secondary.     

Sodium Coordination Environments in Silica Films

The local structure centered on sodium after diffusion in silica (Na-SiO₂ samples) has been determined by means of extended X-ray absorption fine structure (EXAFS) studies. The Na-SiO₂ samples are of particular interest because (i) their sodium content can be varied over a wide range of concentration and (ii) their local structure is representative of that of soda–silica glass. EXAFS analyses reveal the existence of a well-defined local structure involving oxygen, sodium, and silicon neighbors. The Na-O, Na-Na, and Na-Si bonds lengths, which amount to 0.23, 0.30, and 0.38 nm, respectively, do not depend on sodium concentration. This environment closely resembles that found in soda–silica glass. Moreover, it is compatible with the "target site" and "the site memory effect" suggested by recent theories of the ionic conductivity in oxide glasses.     

Hardness, Toughness, and Scratchability of Germanium–Selenium Chalcogenide Glasses

Ge–Se chalcogenide glasses are characterized by relatively low hardness (0.39–2.35 GPa) and low fracture toughness (0.1–0.28 MPa·m^1/2). Actually, the hardness of chalcogen-rich glasses is low enough so that the brittleness parameter, B = H / K _c , is lower than that of silicate glasses. Whereas hardness and Young's modulus increase with increasing germanium contents, fracture toughness follows a trend similar to that of the density and exhibits a maximum for the Ge₂₀Se₈₀ composition, which corresponds to the rigidity percolation threshold. Optical microscopy and atomic force microscopy observations suggest that the indentation deformation proceeds by a localized shear deformation phenomenon. Glasses in the chalcogen-rich region behave viscoelastically at room temperature. As a consequence, an increase of the loading time results in a decrease of hardness and toughness.     

Sequestration and metabolism of protoxic pyrrolizidine alkaloids by larvae of the leaf beetle Platyphora boucardi and their transfer via pupae into defensive secretions of adults

Several neotropical leaf-beetles of the genus Platyphora ingest and specifically metabolize plant acquired pyrrolizidine alkaloids (PAs) of the lycopsamine type (e.g., rinderine or intermedine) and enrich the processed alkaloids in their exocrine defensive secretions. In contrast to the related palaearctic leaf beetles of the genus Oreina, which absorb and store only the non-toxic alkaloid N-oxides, Platyphora sequesters PAs exclusively as protoxic tertiary amines. In this study, the ability of P. boucardi larvae to accumulate PAs was investigated. Tracer studies with [¹⁴C]rinderine and its N-oxide revealed that P. boucardi larvae, like adult beetles, utilize the two alkaloidal forms with the same efficiency, but accumulate the alkaloid as a tertiary amine exclusively. Ingested rinderine is rapidly epimerized to intermedine, which is localized in the hemolymph and all other tissues; it is also detected on the larval surface. Like adults, larvae are able to synthesize their own alkaloid esters (beetle PAs) from orally administered [¹⁴C]retronecine and endogenous aliphatic 2-hydroxy acids. These retronecine esters show the same tissue distribution as intermedine. A long-term feeding experiment lasting for almost four months revealed that retronecine esters synthesized from [¹⁴C]retronecine in the larvae are transferred from larvae via pupae into the exocrine glands of adult beetles. Pupae contain ca. 45% of the labeled retronecine originally ingested, metabolized, and stored by larvae; ca. 12% of larval radioactivity could be recovered from the defensive secretions of adults sampled successively over two and a half months. Almost all of this radioactivity is found in the insect-made retronecine esters that are highly enriched in the defensive secretions, i.e., more than 200-fold higher concentration compared to pupae.     

Slip and Twinning in Polycrystalline Alumina (α-Al2O3) Deformed under Hydrostatic Pressure between 600° and 1000°C

The microstructure of polycrystalline alumina deformed under hydrostatic pressure and at low temperature is investigated by transmission electron microscopy. Deformation occurs mainly by prism plane slip and rhombohedral twinning. Introduction of hydrogen leads to a significant decrease in the yield stress. In large grain size alumina deformed with hydrogen, accommodation of twinning involves dislocation reactions in the twin boundary and in the grains rather than by cracking. Prism plane dislocations decompose into basal dislocations by cross slip probably due to a decrease of Peierls stress for basal slip in the presence of hydrogen.     

Environmental assessment of flue gas cleaning processes of municipal solid waste incinerators by means of the life cycle assessment approach

Life cycle assessment (LCA) is an environmental assessment tool generally applied to products but also to processes. Features of the LCA of processes are presented in this paper. This approach was used to compare two flue gas cleaning processes: the typical wet-type process and the new transported droplets column process. The LCA result shows that the global environmental burden is similar between the two processes, which confirms the viability of the transported droplets column. The distribution of the environmental burden, however, is different between the two processes. The weak points of the transported droplets column are the pollution transfer from air to water and a larger volume to stabilize. Its strong point: it is more efficient in capturing dust particles and toxic pollutants. This process could be improved from an environmental standpoint by adding an electrostatic filter upstream of the transported droplets column to capture the particles. The laboratory results of the transported droplets column need, however, to be confirmed at a larger scale.     

Study of the telomerization of dimethylaminoethyl methacrylate (DMAEMA) with mercaptoethanol. Application to the synthesis of a new macromonomer

The telomerization of dimethylaminoethyl methacrylate (DMAEMA) with mercaptoethanol initiated by 2,2′-azobisisobutyronitrile was first investigated at 70 °C and the influence of the type of solvent was studied. The results showed that well-defined telomers of DMAEMA could not be synthetized via telomerization of DMAEMA in water or water/acetonitrile mixture since the telomerization reaction is in competition with the nucleophilic addition of thiol onto the monomer. Transfer constants for mercaptoethanol in benzene and acetonitrile were determined by Mayo's and O'Brien's methods. The transfer constant obtained in acetonitrile (0,6) was higher than that obtained in benzene. This difference can be explained by the fact that the thiol was consumed by two reactions: nucleophilic addition and telomerization. The influence of solvents on the polymerization kinetics was enlightened. These results were applied to the synthesis of macromonomers of DMAEMA with isocyanatoethyl methacrylate (IEM). These macromonomers were copolymerized with styrene.     

Numerical Simulations of the Effect of Conical Dimension on the Hydrodynamic Behaviour in Spouted Beds

The flow behaviours of gas‐solids were predicted by means of a hydrodynamic model of dense gas‐solid flow in spouted beds. Constitutive equations describing the particulate solids pressure and viscosity were implemented into a hydrodynamic simulation computer program. The effect of operating conditions (inclined angle and gas spouting velocity) on particle velocity and concentration in the spout, annulus and fountain regions were numerical studied. Both vertical and horizontal particle velocities increased with increasing spouting gas velocity. The diameter of the spout increases with decreasing the inclination angle. As the inclination angle is set greater than 60°, the spout cross‐section starts becoming bottlenecked, limiting the upwards flow of solids.