Thermodynamic investigation of thermoresponsive xanthan‐poly (N‐isopropylacrylamide) hydrogels

Polysaccharide‐based hydrogels, such as xanthan maleate/poly(N‐isopropylacrylamide) (PNIPAAm) interpenetrated polymer networks, are thermostimulable materials of interest for the controlled release of biologically active components due to conformation changes at the low critical‐solution temperature (LCST) PNIPAAm phase transition. The phase transition of these interpenetrated polymer network hydrogels, where PNIPAAm is in a ‘confined’ environment, was examined by high resolution magic angle spinning nuclear magnetic resonance and differential scanning calorimetry. High resolution magic angle spinning nuclear magnetic resonance spectroscopy allows the accurate determination of LCST and an evaluation of the corresponding thermodynamic data. More particularly, the evolution of these data as a function of the composition of the hydrogel, and of the external parameters such as pH and ionic strength, was considered. LCST shows a minimal value with increasing xanthan content. Moreover, it was possible to calculate, as a function of temperature, the fraction of NIPAAm which remains uncollapsed. The data obtained for pure PNIPAAm hydrogels are in good agreement with recently published results. The phase transition of PNIPAAm in a diphasic hydrogel is broader when PNIPAAm is ‘confined’ within an interpenetrated polymer network than in a pure PNIPAAm crosslinked network. The widening of the transition with increasing xanthan content indicates a reduction of the PNIPAAm interchain aggregation in a network structure. Copyright © 2011 Society of Chemical Industry     

Role of Serum Cholesterol and Statin Use in the Risk of Prostate Cancer Detection and Tumor Aggressiveness

The aim of this study was to analyze the relationship between statin use along with serum cholesterol levels and prostate cancer (PCa) detection and aggressiveness. Statin users of three years or more and serum cholesterol levels (SC) were assessed in 2408 men scheduled for prostate biopsy. SC was classified as normal (NSC: <200 mg/dL) or high (HSC: >200 mg/dL). High-grade PCa (HGPCa) was considered if the Gleason score was greater than 7. Statin users comprised 30.9% of those studied. The PCa detection rate was 31.2% of men on statins and 37% of non-statin users (p < 0.006). The PCa detection rate was 26.3% in men with NSC and 40.6% in those with HSC (p < 0.001). In the subset of NSC men, the PCa rate was 26.5% for statin users and 26.2% for non-users (p = 0.939), while in men with HSC, the PCa rate was 36.4% for statin users and 42.0% for non-statin users (p = 0.063). The HGPCa rate was 41.8% for statin users and 32.5% for non-users (p = 0.012). NSC men had a 53.8% rate of HGPCa, while the rate was only 27.6% in HSC men (p < 0.001). NSC men on statins had an HGPCa rate of 70.2%, while non-statin users had a rate of 41.2% (p < 0.001). The HGPCa rate for HSC men on statins was 18.8%, while the rate was 30.0% (p = 0.011) for non-users. Logistic regression analysis suggested that serum cholesterol levels could serve as an independent predictor of PCa risk, OR 1.87 (95% CI 1.56–2.24) and HGPCa risk, OR 0.31 (95% CI 0.23–0.44), while statin usage could not. Statin treatment may prevent PCa detection through serum cholesterol-mediated mechanisms. A disturbing increase in the HGPCa rate was observed in statin users who normalized their serum cholesterol.     

Extensive N‐methylation of chitosan: evaluating the effects of the reaction conditions by using response surface methodology

The effects of reaction time, concentration of aqueous sodium hydroxide and molar ratio iodomethane/chitosan on the yield of the reaction of chitosan with iodomethane in N‐methyl‐2‐pyrrolidone (NMP) at 25.0 ± 0.1 °C, as well as on the characteristics of the resulting N,N,N‐trimethylchitosan (TMCh), were evaluated by using full‐factorial 2³ design analysis and response surface methodology. This study also aimed to determine the reaction conditions allowing the production of water‐soluble TMCh presenting a high average degree of quaternization and intrinsic viscosity at high reaction yield. ¹H NMR spectroscopy was employed for structural characterization, including the determination of average degrees of acetylation () and quaternization (), while capillary viscometry was used to determine intrinsic viscosity [η]. The results show that when the extensive N‐methylation is carried out for 24 h in NMP/15% NaOH (w/v) employing a lower excess of iodomethane (CH₃I/Ch = 9), water‐soluble highly substituted ( = 46.0%) TMCh ([η] = 213.0 mL g^?1) can be produced in high yield (81.8%). The highly significant mathematical models resulting from this study describe the dependence of the experimental responses on the reaction conditions and allow the characteristics and properties of the resulting TMCh to be defined by properly choosing the reaction conditions. © 2015 Society of Chemical Industry     

Thiol-ene “clickable” carbon-chain polymers based on diallyl cyclopropane-1,1-dicarboxylate

A novel type of clickable polymers with a very high local density of allyl side groups was developed. These polymers were obtained by the anionic ring-opening (co)polymerization of diallyl cyclopropane-1,1-dicarboxylate using as an initiating system a protic precursor whose acid–base reaction with the t-BuP₄ phosphazene base generated the initiator in situ. The obtained polymers display geminated allyl groups on every third carbon alongside the macromolecular backbone. Homopolymers as well as block and statistical copolymers have been synthesized, with controlled molecular weights and narrow molecular weight distributions. The coupling of mercaptans with the allyl CC double bonds has been investigated both thermally and photochemically, with the influence of the type of initiation on the efficiency of the polymer modification being discussed in comparison with other “clickable” systems. Further functionalization by several thiols was performed, leading to a range of functional poly(cyclopropane-1,1-dicarboxylate)s.     

Structural and rheological investigation of interphase in polyethylene/polyamide/nanoclay ternary blends

This study aims at investigating and characterizing the interphase in Polyethylene (PE)/Polyamide (PA) blends with nodular morphology, filled with organically modified Montmorillonite (C30B), using structural and rheological experimental techniques. PE/PA/C30B blends have been prepared by simultaneous mixing at a dispersed phase fraction (PE or PA) of 20% and a clay fraction ranging from 1 to 6%. Structural properties of the interphase have been investigated using XRD combined with TEM micrographs. The presence of numerous interphase defects is evidenced, and the effect of interphase disorder is discussed. Linear viscoelastic properties show the contribution of the interphase in PE matrix ternary blends at all clay fractions, whereas interphase effects are masked by the contribution of dispersed nanoclay particles in PA matrix ternary blends.     

Iridium complexes incorporating coumarin moiety as catalyst photoinitiators: Towards household green LED bulb and halogen lamp irradiation

Household LED bulbs and halogen lamps are used to promote the ring-opening photopolymerization of epoxides in the presence of a new series of iridium(III) complexes (IrCs) exhibiting enhanced visible light absorption properties through the introduction of a coumarin moiety. These latter complexes are used as catalyst photoinitiators in an oxidative cycle in combination with a silane and an iodonium salt. Remarkably, even under the selected very soft irradiations (e.g. light intensity lower than 2 mW/cm²), excellent polymerization profiles are obtained (conversions > 80%). The mechanisms are investigated by ESR and luminescence experiments.     

Malachite green derivatives for two-photon RNA detection

The design, preparation and characterisation of a library of malachite green (MG) derivatives for two-photon RNA labelling is described. Some of these MG derivatives exhibit an increased affinity for an MG-aptamer, as well as improved two-photon sensitivity when compared to the classical malachite green chloride. The underlying mechanisms and potential benefits for in vivo RNA visualisation are discussed.     

Supramolecular Architectures of Nucleic Acid/Peptide Hybrids

Supramolecular architectures that are built artificially from biomolecules, such as nucleic acids or peptides, with structural hierarchical orders ranging from the molecular to nano-scales have attracted increased attention in molecular science research fields. The engineering of nanostructures with such biomolecule-based supramolecular architectures could offer an opportunity for the development of biocompatible supramolecular (nano)materials. In this review, we highlighted a variety of supramolecular architectures that were assembled from both nucleic acids and peptides through the non-covalent interactions between them or the covalently conjugated molecular hybrids between them.     

Modelling of the Nonlinear Behavior of Compatibilized Polyethylene/Polyamide Blends in Shear and Extensional Flows

We have studied the effect of the amount Φ_c of a reactive compatibilizer on the rheological properties of a polyethylene/polyamide blend, under steady shear and transient extensional flows. Here, we propose to describe the viscosity η(γ) and the first normal stress coefficient γ₁(γ) using a Carreau‐type power‐law model, which is a three‐parameter model. A single model is sufficient to express the behavior of γ₁(γ) On the other hand, the complete η(γ) curve is described by the superposition of two Carreau models, in relation to the presence of two relaxation mechanisms. Moreover, the extentional viscosity η_E(?), estimated using the end pressure drop observed in capillary flow experiments, is expressed by a two‐parameter power‐law model.     

Synthesis and characterization of polyethylene-like polyurethanes derived from long-chain, aliphatic α,ω-diols

Long-chain aliphatic α,ω-diols containing up to 32 consecutive methylene groups were synthesized by several methods and characterized. 1,22-Docosanediol HO-(CH₂)₂₂-OH and 1,32-dotriacontanediol HO-(CH₂)₃₂-OH both exhibited a solid-solid phase transition before melting. The α,ω-diols HO-(CH₂)_m-OH, where m=12, 22, or 32, were reacted in the melt with much shorter aliphatic α,ω-diisocyanates OCN-(CH₂)_n-NCO, where n=4, 6, 8, or 12, producing a series of linear, aliphatic, and increasingly polyethylene-like m,n-polyurethanes. Characterization (by DSC, TGA, and SAXS) of the m,n-polyurethane series showed that when the aliphatic segments were increased, and the hydrogen-bonding densities thus decreased, the polymers displayed physical and thermal properties (for example, solubility and melting temperature) typical of polyethylene.