Chemically mediated ovipositional behaviors of the european corn borer,Ostrinia nubilalis (Lepidoptera: Pyralidae)

The volatile plant sesquiterpenoids farnesene, nerolidol, and farnesol were tested to determine their effect on European corn borer,Ostrinia nubilalis, oviposition during the first six nights of the adult stage. Adult European corn borers were released into cages designed to encourage oviposition on eight glass plates randomly arranged on top of the cage: four coated with either 80µg/cm² farnesene, nerolidol, or farnesol, and four coated with the solvent methylene chloride. The setup was used as a binary choice test. Farnesene was preferred by females because they deposited significantly more egg masses on plates coated with the compound. Nerolidol had no effect. Farnesol, by contrast, deterred oviposition: the number of egg masses was significantly lower on plates covered with that compound. These data show that structural modification at a single terminal functional group in these compounds affects the ovipositional behavior of European corn borer females.This paper reports the results of research only. Mention of a proprietary product does not constitute an endorsement or a recommendation for its use by USDA.     

Effect of fungal damage on seed composition and quality of soybeans

Fungal damage caused by pathogens such asFusarium, Cercospora, andPhomopsis can have a devastating impact on physical quality and farm price of soybeans. In some price-discount schedules, soybeans may be rejected with as low as 5% fungal damage. Although the severity of this problem varies throughout the United States, millions of bushels of fungus-damaged soybeans may be destroyed annually due to a lack of markets. The effect of fungal damage on seed composition was evaluated to assess potential utility of highly damaged soybeans. Graded samples of the cv. Centennial soybean were dried to 10% moisture and blended on a proportional weight basis to derive a series of treatments from 0 to 80% fungal damage. A positive correlation was found between fungal damage and both protein and oil concentrations. This condition was attributed to loss of residual seed mass. As a result, the protein concentration of defatted meal increased from ca. 54 to 66% over the range of 0 to 80% fungal damage. Mycotoxin contamination appeared to be insignificant in these high-protein meals. Fixed colors in bleached, alkali refined oils were intensified by heat treatment prior to extraction. No significant differences, however, were noted in total polar lipid content, phospholipid, or tocopherol composition among treatments of up to 20% fungal damage. Oils from treatments of more than 40% fungal damage were more severely oxidized and could not be degummed effectively. These data suggest that fungus-damaged soybeans may be blended with high-quality soybeans to alleviate the chemical symptoms associated with unacceptable product quality. Thus, through various blend ratios, processors may consider using fungus-damaged soybeans to gain economic advantage, especially when high-quality soybeans have lower protein concentration.     

Shape‐memory behavior of thermally stimulated polyurethane for medical applications

Shape memory polymers (SMPs) have been of great interest because of their ability to be thermally actuated to recover a predetermined shape. Medical applications in clot extracting devices and stents are especially promising. We investigated the thermomechanical properties of a series of Mitsubishi SMPs for potential application as medical devices. Glass transition temperatures and moduli were measured by differential scanning calorimetry and dynamic mechanical analysis. Tensile tests were performed with 20 and 100% maximum strains, at 37 and 80°C, which are respectively, body temperature and actuation temperature. Glass transitions are in a favorable range for use in the body (35–75°C), with high glassy and rubbery shear moduli in the range of 800 and 2 MPa respectively. Constrained stress–strain recovery cycles showed very low hysteresis after three cycles, which is important to know for preconditioning of the material to ensure identical properties during applications. Isothermal free recovery tests showed shape recoveries above 94% for MP5510 thermoset SMP cured at different temperatures. One material exhibited a shape fixity of 99% and a shape recovery of 85% at 80°C over one thermomechanical cycle. These polyurethanes appear particularly well suited for medical applications in deployment devices such as stents or clot extractors. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3882–3892, 2007     

Shape memory polymers based on uniform aliphatic urethane networks

Aliphatic urethane polymers have been synthesized and characterized, using monomers with high molecular symmetry, to form amorphous networks with very uniform supermolecular structures, which can be used as photo‐thermally actuable shape memory polymers (SMPs). The monomers used include hexamethylene diisocyanate (HDI), trimethylhexamethylenediamine (TMHDI), N,N,N′,N′‐tetrakis(hydroxypropyl)ethylenediamine (HPED), triethanolamine (TEA), and 1,3‐butanediol (BD). The new polymers were characterized by solvent extraction, NMR, XPS, UV/VIS, DSC, DMTA, and tensile testing. The resulting polymers were found to be single phase amorphous networks with very high gel fraction, excellent optical clarity, and extremely sharp single glass transitions in the range of 34–153°C. Thermomechanical testing of these materials confirms their excellent shape memory behavior, high recovery force, and low mechanical hysteresis (especially on multiple cycles), effectively behaving as ideal elastomers above T_g. We believe these materials represent a new and potentially important class of SMPs, and should be especially useful in applications such as biomedical microdevices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Microstructures formed by spray freezing of food fats

The spray-freezing of two food fats, tripalmitin (PPP) and cocoa butter (CB) and mixtures thereof, has been modeled experimentally using a novel single droplet freezing apparatus configured so that temperature profiles or samples for microstructure analysis can be obtained. For 2 mm diameter droplets suspended in a cold air flow at temperatures around 2–15°C, initial cooling rates were on the order of 10 K s⁻¹ and the temperature profiles could be correlated directly to DSC data collected at 20 K min⁻¹, indicating that minimal supercooling of the materials occurred in the droplet form. Microstructure analysis confirmed that PPP crystallized preferentially in mixtures, and that the surface structure was very sensitive to storage conditions. The bulk structure was much less sensitive, and the internal microstructure of the PPP droplets revealed distinct nucleation sites, which were absent from the CB: These persisted in the mixtures up to 50 wt%. X-ray analysis indicated that the fats crystallized in their more stable forms, namely, β for PPP and Form V/V1 in CB.     

Synthesis and evaluation of an intercalator-polyamide hairpin designed to target the inverted CCAAT box 2 in the topoisomerase IIalpha promoter

The synthesis and DNA-binding properties of a novel naphthalimide-polyamide hairpin (3) designed to target the inverted CCAAT box 2 (ICB2) site on the topoisomerase IIalpha (topoIIalpha) promoter are described. The polyamide component of 3 was derived from the minor-groove binder, 2, and tailored to bind to the 5'-TTGGT sequence found in and flanking ICB2. The propensity of mitonafide 4 to intercalate between G-C base pairs was exploited by the incorporation of a naphthalimide moiety at the N terminus of 2. Hybrid 3 targeted 5'-CGATTGGT and covered eight contiguous base pairs, which included the underlined ICB2 site. DNase I footprinting analysis with the topoIIalpha promoter sequence demonstrated that 3 bound selectively to the ICB2 and ICB3 sites. Thermal-denaturation studies confirmed these results, and the highest degree of stabilization was found for ICB2 and -3 in preference to ICB1 (4.1, 4.6, and 0.6 degrees C, respectively). CD studies confirmed minor-groove binding and suggested a 1:1 binding stoichiometry. Emission-titration experiments established intercalative binding. Surface plasmon resonance results showed strong binding to ICB2 (2.5x10(7) M(-1)) with no observable binding to ICB1. Furthermore, the binding constant of 3 to ICB2 was larger than that of the parent polyamide 2. The increased binding affinity was primarily due to a reduction in the dissociation-rate constant of the polyamide-DNA complex, which can be attributed to the N-terminal naphthalimide moiety. In addition, the binding site of 3 was larger than that of 2, which innately improved sequence selectivity. We conclude that the polyamide-naphthalimide 3 selectively binds to the ICB2 site by simultaneous intercalation and minor-groove binding, and warrants further investigation as a model compound for the regulation of topoIIalpha gene expression.     

Analytic Model of Laminar‐Turbulent Transition for Bingham Plastics

It is often desirable to operate industrial pipelines transporting non‐Newtonian materials near the transition from laminar to turbulent flow. For the commonly used Bingham plastic model, the Hedström technique overestimates turbulent flow friction losses because it does not take account of viscous‐layer thickening. In the present paper, the Wilson‐Thomas model is applied to predict the transition point for Bingham plastics. Laminar and turbulent friction losses are calculated to show that conditions at transition depend only on the Hedström number. The results are approximated by simplified fit functions. Comparison with existing empirical correlations and experimental data from various sources shows satisfactory agreement.     

DETERMINATION OF ALUMINUM,CALCIUM, AND MAGNESIUM IN FRASER FIR (ABIES FOLIAGE) FOLIAGE AND SURROUNDING SOIL IN THE SOUTHERN APPALACHIANS

Located at high elevation sites in the Southern Appalachians, the Fraser fir (Abies fraseri) has suffered visible decline in recent years. This study involved the measurement of concentration levels of aluminum, calcium, and magnesium by inductively coupled plasma optical emission spectrometry to determine the contribution of acidic deposition to this decline. Calcium and magnesium are nutrients, and hence one would anticipate relatively high foliar concentrations of these elements in the absence of pollution. Conversely, aluminum is toxic to the trees, and one would expect higher foliar concentrations in polluted locations. Statistical comparisons of the metal concentrations did not demonstrate a causal relationship between the location or elevation of Fraser fir stands. However, compared to previous studies, the foliar concentrations of calcium and magnesium were higher than concentrations previously reported in the 1990s, suggesting pollution controls may have reduced atmospheric deposition.     

Using the concept of a measurement system to characterize measurement models used in psychometrics

The philosophy of measurement in the social and behavioral sciences is seen (from without) as typically following the representational viewpoint. However, in practice, this is not the case for the great majority of measures that are developed in this area. The paper surveys several approaches to measurement in the social sciences (i.e., Classical Test Theory, Guttman Scaling, Item Response Theory, Rasch Scaling, and Construct Modeling), as examples of measurement approaches in the area of psychometrics, and uses the foundational concept of a measuring system, as developed by Mari [1], to explicate the logic on which these approaches are based and thus enable a comparison with measurement approaches used by other fields such as engineering and physics. The paper uses the underlying concept of the standard reference set (one of the essential features of Mari’s formalization) to show how the five approaches differ, and also how they are related. The importance of these differences, and the consequences for measurement using those approaches are also explicated and discussed.     

Treatment of atrazine in nursery irrigation runoff by a constructed wetland

To investigate the treatment capability of a surface flow wetland at a container nursery near Portland, Oregon, atrazine was introduced during simulated runoff events. Treatment efficiency was evaluated as the percent atrazine recovered (as percent of applied) in the water column at the wetland's outlet. Atrazine treatment efficiency at the outlet of the constructed wetland during a 7-d period ranged from 18-24% in 1998 (experiments 1-3) and 16-17% in 1999 (experiments 4 and 5). Changes in total flow, or frequency and intensity of runoff events did not affect treatment. For experiment 6 in 1999, where the amount, frequency, and duration of runoff events exceeded all other experiments, treatment was compromised. For all experiments, deethylatrazine (DEA) and deisopropylatrazine (DIA) accounted for 13-21% of the initial application. Hydroxyatrazine (HA) was rarely detected in the water. Organic carbon adsorption coefficients (Koc) were determined from batch equilibrium sorption isotherms with wetland sediment, and they decreased in the order of HA > DIA > atrazine > DEA. Static water-sediment column experiments indicated that sorption is an important mechanism for atrazine loss from water passing through the constructed wetland. The results of the MPN assay indicated the existence in the wetland of a low-density population of microorganisms with the potential to mineralize atrazine's ethyl side chain.