Profit Aware Circuit Design Under Process Variations Considering Speed Binning

In this paper, a profit-aware design metric is proposed to consider the overall merit of a design in terms of power and performance. A statistical design methodology is then developed to improve the economic merit of a design considering frequency binning and product price profile. A low-complexity sensitivity-based gate sizing algorithm is developed to improve economic gain of a design over its initial yield-optimized design. Finally, we present an integrated design methodology for simultaneous sizing and bin boundary determination to enhance profit under an area constraint. Experiments on a set of ISCAS'85 benchmarks show in average 19% improvement in profit for simultaneous sizing and bin boundary determination, considering both leakage power dissipation and delay bounds compared to a design initially optimized for 90% yield at iso-area in 70-nm bulk CMOS technology.     

Effect of Ionization Characteristics on Electrochemical Migration Lifetimes of Sn-3.0Ag-0.5Cu Solder in NaCl and Na<Subscript>2</Subscript>SO<Subscript>4</Subscript> Solutions

Anodic dissolution characteristics and electrochemical migration (ECM) behavior of Sn-3.0Ag-0.5Cu solder in NaCl and Na₂SO₄ solutions were investigated using anodic polarization tests and water drop tests (WDT). The ECM lifetime of Sn-3.0Ag-0.5Cu solder in NaCl solution (42.4 s) was longer than that in Na₂SO₄ solution (34.8 s). The pitting potential of Sn-3.0Ag-0.5Cu solder in NaCl solution (135 mV, SCE) was higher than that in Na₂SO₄ solution (−367 mV, SCE). The passivity film (SnO₂) formed on Sn-3.0Ag-0.5Cu solder during WDTs in NaCl solution was thicker than that formed in Na₂SO₄ solution. Therefore, the longer ECM lifetime of Sn-3.0Ag-0.5Cu solder in NaCl solution than in Na₂SO₄ solution can be attributed to the higher pitting potential in the NaCl solution, which is ascribed to the formation of a thicker passivity film (SnO₂) in the former. It was confirmed that microelements such as Ag and Cu do not take part in ECM because they form chemically stable intermetallic compounds with Sn. We believe that Sn is the only element that contributes to ECM, and dissolution of Sn at the anode is possibly the rate-determining step of ECM of Sn-3.0Ag-0.5Cu solder.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

Hierarchically Assembled Mesenchymal Stem Cell Spheroids Using Biomimicking Nanofilaments and Microstructured Scaffolds for Vascularized Adipose Tissue Engineering

Composite multicellular spheroids composed of mesenchymal stem cells (MSCs) and synthetic biodegradable nanofilaments are fabricated. Extracellular‐matrix‐mimicking nanofilaments, prepared from transverse fragmentation of semicrystalline poly(L ‐lactic acid) nanofibers and subsequent surface modification with cell adhesive peptides, are used to form composite multicellular spheroids with MSCs by cellular self‐assembly. The size of the composite spheroids could be readily controlled with the integrated amount of the nanofilaments. The composite spheroids show enhanced adipogenic potential compared to homotypic spheroids. The resultant spheroids are used as building blocks for 3D biohybrid construction with the assistance of a microstructured scaffold fabricated by a direct polymer melt deposition process. An angiogenic growth factor, basic fibroblast growth factor, is also locally delivered in a sustained fashion from the heparinized scaffold surface for facile neovascularization of adipogenic tissue. The produced multiscaled and multifunctional hybrid MSC construct enable the successful formation of vascularized adipose tissue in vivo.     

Dissolution Behaviors and Applications of Silicon Oxides and Nitrides in Transient Electronics

Silicon oxides and nitrides are key materials for dielectrics and encapsulation layers in a class of silicon‐based high performance electronics that has ability to completely dissolve in a controlled fashion with programmable rates, when submerged in bio‐fluids and/or relevant solutions. This type of technology, referred to as “transient electronics”, has potential applications in biomedical implants, environmental sensors, and other envisioned areas. The results presented here provide comprehensive studies of transient behaviors of thin films of silicon oxides and nitrides in diverse aqueous solutions at different pH scales and temperatures. The kinetics of hydrolysis of these materials depends not only on pH levels/ion concentrations of solutions and temperatures, but also on the morphology and chemistry of the films, as determined by the deposition methods and conditions. Encapsulation strategies with a combination of layers demonstrate enhancement of the lifetime of transient electronic devices, by reducing water/vapor permeation through the defects.     

Understanding social viewing through discussion network and emotion: A focus on South Korean presidential debates

With the development of social media, television viewing is perceived no longer as an isolated activity. This study explores the underlying mechanism of the effects of social viewing discussion networks (i.e., bridging and bonding social viewing networks) on emotions (i.e., anger, fear, and enthusiasm), and moreover on opinion consolidation as well as opinion weakening in the context of the 2017 South Korean presidential debates. Overall, the main results are: a) Social viewing discussion networks influenced emotional states of social viewers, b) Emotions influenced attitude formation during social viewing, and c) Enthusiasm served as a catalyst that links bonding and bridging social viewing, and opinion consolidation. Implications and theoretical contributions are discussed.     

Performance analysis of an enhanced DQRUMA/MC-CDMA protocol for voice traffic

The original distributed-queueing request update multiple-access (DQRUMA)/multicode code-division multiple-access (MC-CDMA) protocol was developed as a channel access protocol for wireless packet CDMA networks. This protocol has recently attracted considerable attention. We modify the original protocol, which was designed for data traffic only, to additionally accommodate voice traffic and call it the A-Protocol. We propose a new packet CDMA protocol that enhances the A-Protocol by improving the utilization of receivers in a base station and call it the E-Protocol. In the E-Protocol, an access request is attempted with a randomly chosen code at a request minislot. We analytically evaluate the performance of both protocols and compare analytical results with computer simulation. Analytical results agree well with simulation results.     

Low-Complexity Symbol Detector for MIMO-OFDM-Based Wireless LANs

In this brief, a low-complexity hardware architecture for multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) symbol detectors with two transmit and two receive antennas is proposed. The detectors support two MIMO-OFDM schemes of space-frequency block coded OFDM and space-division multiplexing OFDM in order to achieve higher performance and throughput. However, symbol detection processes for these two schemes have high computational complexity, which is a burden to hardware implementation of MIMO-OFDM symbol detectors. In order to reduce complexity, the proposed symbol detector is designed with shared architecture, where similar functional blocks are merged and share the hardware resources, and results in the reduction of logic gates by 34% over a conventional architecture employing two individual detectors     

Performance analysis of HomePlug 1.0 MAC with CSMA/CA

As demands for data communications among home/personal devices in home environments increase, various types of home-networking technologies have appeared. Among them, power line communication is one of the most promising wired home-networking technologies, because the existing power line facilities can be utilized for data transmission without deploying any new physical links. HomePlug 1.0 is the most popular power line communication technology, which has been standardized by the HomePlug power line alliance, and attempts to mitigate the effect of time- and frequency-varying channels by enhanced modulation and channel coding. Although HomePlug 1.0 has undergone field trials and simulations, its analytic model and performance was only conducted for throughput under saturation conditions. We propose a new analytic model to evaluate MAC throughput and delay of HomePlug 1.0 both under saturation and under normal traffic conditions. We verify our proposed model via simulations and evaluate the performance of HomePlug 1.0.