A Colorimetric Hydrocarbon Sensor Employing a Swelling‐Induced Mechanochromic Polydiacetylene

Exceptional challenges have confronted the rational design of colorimetric sensors for saturated aliphatic hydrocarbons (SAHCs). The main reasons for this difficulty are the extremely nonpolar nature of these targets and their lack of functional groups that can interact with probes. By taking advantage of a mechanochromic conjugated polydiacetylene (PDA) and the hydrocarbon‐induced swelling properties of polydimethylsiloxane (PDMS), a sensor film that enables simple, colorimetric differentiation between a variety of C5 to C14 aliphatic hydrocarbons is fabricated. The unprecedented PDA–PDMS composite sensor undergoes a blue‐to‐red colorimetric transition on a timescale that is dependent on the chain length of the hydrocarbon target. In addition, the development of the red color is directly proportional to the swelling ratio of the film. This straightforward approach enables naked‐eye differentiation between n‐pentane and n‐heptane. The versatility of the sensor system is demonstrated by using it for the colorimetric determination of kerosene in adulterated diesel oil. Finally, the observation that a PDA microcrystal in the film undergoes significant expansion and tearing in concert with a blue‐to‐red colorimetric transition during the swelling process provides direct evidence for the mechanism for the mechanochromic behavior of the PDA.     

Highly Stretchable or Transparent Conductor Fabrication by a Hierarchical Multiscale Hybrid Nanocomposite

As is frequently seen in sci‐fi movies, future electronics are expected to ultimately be in the form of wearable electronics. To realize wearable electronics, the electric components should be soft, flexible, and even stretchable to be human‐friendly. An important step is presented toward realization of wearable electronics by developing a hierarchical multiscale hybrid nanocomposite for highly flexible, stretchable, or transparent conductors. The hybrid nanocomposite combines the enhanced mechanical compliance, electrical conductivity, and optical transparency of small CNTs (d ≈ 1.2 nm) and the enhanced electrical conductivity of relatively bigger Ag nanowire (d ≈ 150 nm) backbone to provide efficient multiscale electron transport path with Ag nanowire current backbone collector and local CNT percolation network. The highly elastic hybrid nanocomposite conductors and highly transparent flexible conductors can be mounted on any non‐planar or soft surfaces to realize human‐friendly electronics interface for future wearable electronics.     

Aptamer‐Functionalized Multidimensional Conducting‐Polymer Nanoparticles for an Ultrasensitive and Selective Field‐Effect‐Transistor Endocrine‐Disruptor Sensors

An endocrine disruptor (ED) is a type of xenobiotic compound that can cause serious diseases related to the estrous cycle, as well as various types of cancer. At low ED concentrations, estrogen receptors may respond as they would under physiological conditions. In this work, aptamer‐functionalized multidimensional conducting‐polymer (3‐carboxylate polypyrrole) nanoparticles (A_M_CPPyNPs) are fabricated for use in an FET sensor to detect bisphenol A (BPA). The multidimensional system, M_CPPyNPs, is first produced by means of dual‐nozzle electrospray of pristine CPPyNPs and vapor deposition polymerization of additional conducting polymer. The M_CPPyNPs are then immobilized on an amine‐functionalized (–NH₂) interdigitated‐array electrode substrate, through the formation of covalent bonds with amide groups (–CONH). The amine‐functionalized BPA‐binding aptamer is then introduced in the same way as that for M_CPPyNP immobilization. The resulting A_M_CPPyNP‐based FET sensors exhibit ultrasensitivity and selectivity towards BPA at unprecedentedly low concentrations (1 fm ) and among molecules with similar structures. Additionally, due to the covalent bonding involved in the immobilization processes, a longer lifetime is expected for the FET sensor.     

Carbon Nanotube‐Encapsulated Noble Metal Nanoparticle Hybrid as a Cathode Material for Li‐Oxygen Batteries

Although Li‐oxygen batteries offer extremely high theoretical specific energy, their practical application still faces critical challenges. One of the main obstacles is the high charge overpotential caused by sluggish kinetics of charge transfer that is closely related to the morphology of discharge products and their distribution on the cathode. Here, a series of noble metal nanoparticles (Pd, Pt, Ru and Au) are encapsulated inside end‐opened carbon nanotubes (CNTs) by wet impregnation followed by thermal annealing. The resultant cathode materials exhibit a dramatic reduction of charge overpotentials compared to their counterparts with nanoparticles supported on CNT surface. Notably, the charge overpotential can be as low as 0.3 V when CNT‐encapsulated Pd nanoparticles are used on the cathode. The cathode also shows good stability during discharge–charge cycling. Density functional theory (DFT) calculations reveal that encapsulation of “guest” noble metal nanoparticles in “host” CNTs is able to strengthen the electron density on CNT surfaces, and to avoid the regional enrichment of electron density caused by the direct exposure of nanoparticles on CNT surface. These unique properties ensure the uniform coverage of Li₂O₂ nanocrystals on CNT surfaces instead of localized distribution of Li₂O₂ aggregation, thus providing efficient charge transfer for the decomposition of Li₂O₂.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Relaxor/Ferroelectric Composites: A Solution in the Quest for Practically Viable Lead‐Free Incipient Piezoceramics

Recently developed lead‐free incipient piezoceramics are promising candidates for off‐resonance actuator applications with their exceptionally large electromechanical strains. Their commercialization currently faces two major challenges: high electric field required for activating the large strains and large strain hysteresis. It is demonstrated that design of a relaxor/ferroelectric composite provides a highly effective way to resolve both challenges. Experimental results in conjunction with numerical simulations provide key parameters for the development of viable incipient piezoceramics.     

Balanced RF Duplexer with Low Interference Using Hybrid BAW Resonators for LTE Application

A balanced RF duplexer with low interference in an extremely narrow bandgap is proposed. The Long‐Term Evolution band‐7 duplexer should be designed to prevent the co‐existence problem with the WiFi band, whose fractional bandgap corresponds to only 0.7%. By implementing a hybrid bulk acoustic wave (BAW) structure, the temperature coefficient of frequency (TCF) value of the duplexer is successfully reduced and the suppressed interference for the narrow bandgap is performed. To achieve an RF duplexer with balanced Rx output topology, we also propose a novel balanced BAW Rx topology and RF circuit block. The novel balanced Rx filter is designed with both lattice‐ and ladder‐type configurations to ensure excellent attenuation. The RF circuit block, which is located between the antenna and the Rx filter, is developed to simultaneously function as a balance‐to‐unbalance transformer and a phase shift network. The size of the fabricated duplexer is as small as 2.0 mm × 1.6 mm. The maximum insertion loss of the duplexer is as low as 2.4 dB in the Tx band, and the minimum attenuation in the WiFi band is as high as 36.8 dB. The TCF value is considerably lowered to ?16.9 ppm/°C.     

High‐Performance Dual‐Circularly Polarized Reflector Antenna Feed

This paper presents a high‐performance dual‐circularly polarized feed employing a dielectric‐filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter‐wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end‐launch‐type coaxial‐to‐waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.     

Calcium Compounds to Improve Gel Functionality of Pacific Whiting and Alaska Pollock Surimi

The effect of calcium compounds during three thermal treatments with or without setting was studied. Formation of cross-linking was investigated using SDS-PAGE. Solubility varied. Calcium acetate, chloride, and caseinate were extremely soluble. Calcium lactate had good solubility at 0.2% or higher, then in descending order were phosphate, citrate, sulfate, and carbonate. Effects of temperature on solubility were not measurable except for caseinate. When 25°C setting was applied to surimi, calcium was most effective. Effect of calcium on shear stress was dependent on species, setting temperature, and specific compound. SDS-PAGE indicated that improved gel functionality was likely due to Ca⁺⁺-dependent trans-glutaminase. Shear strain values were not affected by adding calcium compounds regardless of species or thermal treatments.