MEAN STRESS EFFECTS ON LOW CYCLE FATIGUE FOR A HIGH STRENGTH STEEL

Abstract— ASTM A723 Q & T steel with a yield strength and ultimate strength of 1170 and 1262 MPa respectively was evaluated for mean stress-strain effects under smooth specimen axial strain controlled low cycle fatigue conditions with strain ratios R of −2, −1, 0, 0.5 and 0.75. Cycles to failure ranged from 15 to 10⁵. Cyclic stress-strain response based upon half-life hysteresis loop peaks were similar for all R ratios. Mean stress relaxation occurred for R ≠−1 only when plastic strain amplitudes were present and this occurred above total strain amplitudes of 0.005. Thus, mean stress relaxation was completely dependent upon cyclic plasticity. Mean strains did not affect low cycle fatigue life unless accompanied by half-life mean stress. Tensile mean stress was detrimental and compressive mean stress was beneficial and these effects only occurred at strain ampltidues below 0.005. Three different mean stress models were used to evaluate the low cycle fatigue data and the SWT log-log linear model best represented the data. These results can be used with the local notch strain fatigue life prediction methodology.     

Offset-trimming bit-line sensing scheme for gigabit-scale DRAM's

A new offset-trimming bit-line sensing scheme is described which is suitable for gigabit-scale DRAM's. This sensing scheme can suppress the sensitivity degradation caused by the large electrical parameter variation of deep submicron transistors. The effective offset voltage dependence on trimming time is analyzed and verified with simulation results. As compared with a conventional direct sensing scheme, the proposed scheme shows remarkable improvement on the sensitivity. A test device was fabricated with a 0.25 μm CMOS technology and its measurement results indicate the successful operation of offset-trimming     

Memorization of "unrelated" word strings by young nonpsychotic schizophrenics.

Used multiple word lists with low contextual constraints to examine nonorganizational processes or "strategies" which might be operating in single-trial free recall by schizophrenics. Ss were 20 young nonpsychotic schizophrenics and 20 normal controls. The schizophrenics, as compared to the normals, showed limited storage capacities of the primary and secondary memories, vulnerability to intrusion, slow response time, inefficiency in utilizing stimulus contiguity for organization, and consequential recall deficit. These findings, with those from previous investigations, suggest that both organizational and nonorganizational dysfunctions may underlie the schizophrenics' poor performance. The possibility that nonorganizational processes may be integral parts of mnemonic organization is discussed. (28 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Prediction of thermal conductivity and electrical resistivity of porous metallic materials

Thermal conductivity and electrical resistivity of porous materials, including 304L stainless steel Rigimesh, 304L stainless steel sintered spherical powders, and OFHC sintered spherical powders at different porosities and temperatures are reported and correlated. It was found that the thermal conductivity and electrical resistivity can be related to the solid material properties and the porosity of the porous matrix regardless of the matrix structure. It was also found that the modified Wiedemann-Franz-Lorenz relationship is valid for the porous materials under consideration. For high conductivity materials, the Lorenz function and the lattice component of conductivity depend on the material and are independent of the porosity. For low conductivity, the lattice component depends on the porosity as well.     

The Bias of Sighted Reviewers in Research Proposal Evaluation: A Comparative Analysis of Blind and Open Review in Korea

This article compares empirically the major factors affecting blinded and sighted reviewers in the selection of research proposals to be funded in a "scientifically small" country. Fisher's Z-test shows that the applicant characteristics (rank of undergraduate school where the applicant studied, professional age of the applicant, and academic recognition of the applicant) are the major factors leading to the significantly different evaluation scores between blinded and sighted reviewers. This means that "open" evaluation of research proposals is obviously biased. Policy implications of the findings and future research directions are discussed.     

Adrenal insufficiency presenting as unexplained hypotension in nocturnal home hemodialysis

Adrenal insufficiency is a complication of chronic corticosteroid therapy. Unexplained hypotension may be a manifestation of an adrenal insufficient state in patients with a history of corticosteroid therapy on hemodialysis. We present a series of five cases of patients on nocturnal home hemodialysis with hypotension as the main manifestation of adrenal insufficiency. Unexplained hypotension in patients with a history of corticosteroid therapy should prompt the managing clinician to consider adrenal insufficiency as a possible cause.     

Nanoporous Gold Bowls: A Kinetic Approach to Control Open Shell Structures and Size‐Tunable Lattice Strain for Electrocatalytic Applications

Controlling sub‐10 nm ligament sizes and open‐shell structure in nanoporous gold (NPG) to achieve strained lattice is critical in enhancing catalytic activity, but it remains a challenge due to poor control of reaction kinetics in conventional dealloying approach. Herein, a ligament size‐controlled synthesis of open‐shell NPG bowls (NPGB) through hetero‐epitaxial growth of NPGB on AgCl is reported. The ligament size in NPGB is controlled from 6 to 46 nm by varying the hydroquinone to HAuCl₄ ratio. The Williamson–Hall analysis demonstrates a higher lattice strain in smaller ligament size. In particular, NPGB with 6 nm (NPGB 6) ligament size possess the highest strain of 15.4 × 10^?3, which is nearly twice of conventional 2D NPG sheets (≈8.8 × 10^?3). The presence of high surface energy facets in NPGBs is also envisaged. The best electrocatalytic activity toward methanol oxidation is observed in NPGB 6 (27.8 μA μg^?1), which is ≈9‐fold and 3‐fold higher than 8 nm solid Au nanoparticles, and conventional NPG sheets. The excellent catalytic activity in NPGB 6 is attributed to the open‐shell structure, lattice strain, and higher electro‐active surface area, allowing efficient exposure of catalytic active sites to facilitate the methanol oxidation. The results offer a potential strategy for designing next generation electrocatalysts.     

Cost-effective reflectance calibration method for small UAV images

ABSTRACT

We introduce a cost-effective reflectance calibration method for small unmanned aerial vehicle (sUAV) images using ethylene-vinyl acetate (EVA) greyscale reference panels. The goal is to test if such light-weight and low-cost panels can provide sufficient calibration accuracy to support UAV survey projects. The universal calibration equations to convert red-green-blue (RGB) digital number (DN) values of UAV images to surface reflectance values were constructed based on the relationship between RGB values measured by a colour digitizer and surface reflectance values measured by a spectrometer. We compared the calibration results for UAV ortho-mosaic images acquired at three different illumination conditions in late autumn to the results derived from high-cost commercial panels. The comparison showed high degree of agreement between our method using the EVA panels with the traditional methods using the commercial panels. The Mann–Whitney U test verified our method was statistically more significant at all illumination conditions tests. In addition, the calibration results applied for two different sensors and three different flight altitudes acquired in early summer were satisfactory. This method is transferable to various illumination conditions and flight altitudes as long as the effects of shades and the bidirectional reflectance distribution function (BRDF) are minimal. We expect our research could expedite sUAV image calibration by lowering its cost and levelling its availability.     

Low distortion speech enhancement

An innovative approach to speech enhancement is illustrated which minimises distortion to the underlying speech during the noise-reduction process. The key to this approach lies in the identification of whether the additive noise for a particular frequency component is constructive or destructive. Once this can be identified both multiplicative and subtractive filters can be derived using the minimum mean-square error criterion. The optimal combination of the proposed multiplicative and subtractive filter is also shown