Taking the challenge of multiple access for third-generationcellular mobile radio systems-a European view

In Europe, the challenge of the design of third-generation cellular mobile radio systems has been taken numerous research and development activities in this field have been started. The authors try to give an overview of the European activities in this field. The article is organized in two parts. In the first part, the requirements for third-generation cellular mobile radio systems such as Universal Mobile Telecommunications System (UMTS) and Future Public Land Mobile Telecommunications System (FPLMTS), which has been named International Mobile Telecommunications after the year 2000 (IMT-2000) are presented concisely. Also, the importance and challenge of the multiple access design for such third-generation cellular mobile radio systems is explained. In the second part, numerous European research activities with focus on the multiple access design for third-generation cellular mobile radio systems are reviewed     

Quality of service in telecommunications .II. Translation of QoSparameters into ATM performance parameters in B-ISDN

The main goal of this article is to present the translation of quality of service (QoS) parameters between layers. The QoS parameters in the ATM layer and AAL are defined. This translation concept came from the QoS framework in which the influence of the protocol stack on the QoS should be considered. As an example, we concentrate on the translation from the AAL to the ATM layer, as the AAL must be designed to be service-dependent and specific. Translation, both taking the transport protocol into account as well as between application and transport QoS, needs further study. However, our study shows that the QoS translation is a possible and good approach in end-to-end QoS guarantees in the broadband integrated services digital network (B-ISDN). As far as the end-to-end QoS guarantee issue is concerned, the transport QoS requirements are specified in terms of bounds on transport QoS parameters. The bounds on transport QoS parameters will be translated into the bounds on ATM layer QoS parameters. The ATM-layer QoS parameters resulting from the translation will be the performance requirements on a connection basis for the ATM network, but are basically the end-to-end parameters, including the network and the end systems. Therefore, the QoS translation finally results in the network performance parameters in the ATM network. We define QoS parameters in the AAL and ATM layer. Case studies in which the translation method is applied to a constant bit rate (CBR) video service and data service, respectively, are also presented     

Enhancement of the photoelectric performance of dye-sensitized solar cells by using a CaCO3-coated TiO2 nanoparticle film as an electrode

Core-shell-type nanoparticles with TiO₂ cores and CaCO₃ shells were applied as the electrode of dye-sensitized solar cells. The performance of the cell was significantly improved (as high as 26.7%) compared to the case when un-coated TiO₂ particle film was used as electrode. The improved energy conversion efficiency has been ascribed to (i) enhanced dye adsorption due to the high isoelectric point of the overlayer, and (ii) the prevention of the back electron transfer by the insulating nature of the overlayer.     

Power generation characteristics of a sandwich‐type self‐heating thermoelectric generator with spatially varying embedded heat source

Power generation characteristics of a sandwich‐type thermoelectric generator in which the heat source is embedded into thermoelectric elements are investigated. Our previous work on a similar concept only considered a uniform heat source distribution inside thermoelectric elements. In this work, the effect of the spatial distribution of a heat source is examined. In particular, the effect of the concentration of heat source near the one end, that is, the hot end, is intensively studied as a potential means of improving the efficiency of the device. Although the effects of heat source concentration in impractical cases without heat transfer limitations on the cold side remain ambiguous, it become clear that heat source concentration indeed has positive effects in more realistic cases with finite heat transfer coefficients imposed on the cold side. Because of the relatively low efficiency of typical thermoelectric generation, a significant amount of heat must be dissipated from the cold end of the thermoelectric element. Greater heat source concentration near the hot end leads to more effective utilization of available heat source, reduces the amount of heat rejected at the cold end, and lowers the hot end temperature of the thermoelectric element. Overall, it is suggested that heat source concentration can be used as a method to achieve more efficient operation and better structural integrity of the system. Copyright © 2015 John Wiley & Sons, Ltd.     

Graphene Quantum Sheet Catalyzed Silicon Photocathode for Selective CO2 Conversion to CO

The reduction of carbon dioxide (CO₂) into chemical feedstock is drawing increasing attention as a prominent method of recycling atmospheric CO₂. Although many studies have been devoted in designing an efficient catalyst for CO₂ conversion with noble metals, low selectivity and high energy input still remain major hurdles. One possible solution is to use the combination of an earth‐abundant electrocatalyst with a photoelectrode powered by solar energy. Herein, for the first time, a p‐type silicon nanowire with nitrogen‐doped graphene quantum sheets (N‐GQSs) as heterogeneous electrocatalyst for selective CO production is demonstrated. The photoreduction of CO₂ into CO is achieved at a potential of ?1.53 V versus Ag/Ag⁺, providing 0.15 mA cm^?2 of current density, which is 130 mV higher than that of a p‐type Si nanowire decorated with well‐known Cu catalyst. The faradaic efficiency for CO is 95%, demonstrating significantly improved selectivity compared with that of bare planar Si. The density functional theory (DFT) calculations are performed, which suggest that pyridinic N acts as the active site and band alignment can be achieved for N‐GQSs larger than 3 nm. The demonstrated high efficiency of the catalytic system provides new insights for the development of nonprecious, environmentally benign CO₂ utilization.     

Digital predistorter using multiple lookup tables

A new digital predistorter is proposed that copes with the variation of power amplifier characteristics faster than the adaptation rate of the predistorter by using multiple lookup tables. Experimental results derived from a prototype show that the proposed predistorter can suppress the adjacent channel interference up to 12 dB compared to the conventional predistorter with a single lookup table.     

Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Acoustooptic Tunable Gap-Type Bandpass Filter With a Broad Stopband

We demonstrate a novel all-fiber gap-type tunable bandpass filter configuration that consists of a broadband hollow optical fiber (HOF) acoustooptic tunable filter (AOTF) concatenated with a narrowband single-mode fiber (SMF)-AOTF. Owing to the unique mode coupling properties of HOF-AOTF and SMF-AOTF, a narrow passband channel of a full-width at half-maximum (FWHM) of ~4 nm could be formed in a broad stopband platform of a 90-nm FWHM successfully. In this scheme, the center wavelength and rejection efficiency of both passband and stopband were found to be flexibly tunable by adjusting the frequency and the voltage of radio-frequency signals applied to individual acoustic transducers.     

Low-Loss Polymer-Based Long-Range Surface Plasmon-Polariton Waveguide

To improve the propagation loss of polymer-based long-range surface-plasmon-polariton (LR-SPP) waveguide devices at the telecom wavelength range, low-loss LR-SPP waveguides were fabricated in an ultraviolet-curable acrylate polymer with a low refractive index and absorption loss. A propagation loss of 1.72 dB/cm at a wavelength of 1.55 mum was achieved with a 14-nm-thick and 3-mum-wide metal stripe.     

All-Optical Data Vortex Node Using an MZI-SOA Switch Array

We propose and demonstrate a new structure of a Data Vortex switch node for all-optical routing of wavelength-division-multiplexing (WDM) 10-Gb/s optical packets. The proposed node consists of two Mach-Zehnder interferometers with integrated semiconductor optical amplifier: an optical and gate and a high-speed optical switch. In the experiment, WDM 10-Gb/s data packets are successfully routed with 1-dB power penalty at a bit-error rate of 10^-9.