Fat Mimicking Properties of Citric Acid Treated Sweet Potato Starch

Fat mimicking properties of citric acid treated sweet potato starch were investigated in this present study. Citric acid treated sweet potato starch was prepared by treating the native sweet potato starch with 3% citric acid for 6 h at a temperature of 45°C. Dextrose equivalent value of citric acid treated sweet potato starch was 2.05%. A significant increase in amylose content was noticed in citric acid treated sweet potato starch possibly due to the lyses of amylopectin fractions. The melting temperature of citric acid treated sweet potato starch was 51.44°C, which was close to the melting point of fat. Citric acid treated sweet potato starch exhibited superior water holding capacity and in vitro digestibility. Gel strength and enthalpy (?H) of citric acid treated sweet potato starch were comparatively lower than native sweet potato starch; correspondingly, citric acid treated sweet potato starch confirmed a low pasting profile. Native sweet potato starch and citric acid treated sweet potato starch exhibited a shear-thinning behavior. Acid treatment did not alter the granule size of native sweet potato starch (≈8 µm). Hence, this study concluded that citric acid treated sweet potato starch would be used as a potential fat replacer in food preparations due to its fat mimicking properties.     

Up-cycling of PET (polyethylene terephthalate) to the biodegradable plastic PHA (polyhydroxyalkanoate)

The conversion of the petrochemical polymer polyethylene terephthalate (PET) to a biodegradable plastic polyhydroxyal-kanoate (PHA) is described here. PET was pyrolised at 450 degrees C resulting in the production of a solid, liquid, and gaseous fraction. The liquid and gaseous fractions were burnt for energy recovery, whereas the solid fraction terephthalic acid (TA) was used as the feedstock for bacterial production of PHA. Strains previously reported to grow on TA were unable to accumulate PHA. We therefore isolated bacteria from soil exposed to PET granules at a PET bottle processing plant From the 32 strains isolated, three strains capable of accumulation of medium chain length PHA (mclPHA) from TA as a sole source of carbon and energy were selected for further study. These isolates were identified using 16S rDNA techniques as P. putida (GO16), P. putida (GO19), and P. frederiksbergensis (GO23). P. putida GO16 and GO19 accumulate PHA composed predominantly of a 3-hydroxydecanoic acid monomer while P. frederiksbergensis GO23 accumulates 3-hydroxydecanoic acid as the predominant monomer with increased amounts of 3-hydroxydodecanoic acid and 3-hydroxydodecenoic acid compared to the other two strains. PHA was detected in all three strains when nitrogen depleted below detectable levels in the growth medium. Strains GO16 and GO19 accumulate PHA at a maximal rate of approximately 8.4 mg PHA/l/h for 12 h before the rate of PHA accumulation decreased dramatically. Strain GO23 accumulates PHA at a lower maximal rate of 4.4 mg PHA/l/h but there was no slow down in the rate of PHA accumulation over time. Each of the PHA polymers is a thermoplastic with the onset of thermal degradation occurring around 308 degrees C with the complete degradation occurring by 370 degrees C. The molecular weight ranged from 74 to 123 kDa. X-ray diffraction indicated crystallinity of the order of 18-31%. Thermal analysis shows a low glass transition (-53 degrees C) with a broad melting endotherm between 0 and 45 degrees C.     

Antifungal activity of five different essential oils in vapour phase for the control of Colletotrichum gloeosporioides and Lasiodiplodia theobromae in vitro and on mango

Mango fruit has high commercial value; however, major postharvest losses are encountered throughout the supply chain due to postharvest diseases. These results lead to the search for natural fungicide for postharvest diseases control. The antifungal effects of five essential oils (thyme, clove, cinnamon, anise and vitex) were assessed by disc volatilisation method. Thyme oil vapours at 5 μL per Petriplate, and clove and cinnamon oil at 8 μL per Petriplate showed 100% growth inhibition of mango pathogens in vitro. GC/MS analysis of essential oil showed thymol (23.88), o‐cymol (23.88) and terpinolene (23.88) as the major constituents of thyme oil. Clove and cinnamon oils contain 3‐allyl‐2‐methoxyphenol (37.42%) and benzofuran 3‐methyl (17.97%), respectively. Thyme oil as a fumigant at 66.7 μL L^?1 showed a significant (P < 0.05) inhibition on postharvest pathogens of mango fruits stored at 25 °C for 6 days. Results of our study suggest the possibility of using thyme oil as an alternate natural fungicide to manage postharvest diseases in mango.     

Synthesis,structural and luminescence properties of near white light emitting Dy-doped Y2CaZnO5 nanophosphor for solid state lighting

Novel near white light emitting Y₂CaZnO₅ (YCZ) nanocrystalline powders doped with Dy³⁺ ions were synthesized via the citrate gel combustion method. The structure of the compound is found to be triclinic with a particle size in the range of 20–30 nm. Luminescence properties have been characterized using photoluminescence (PL), excitation spectra and decay time measurements. The PL spectra have shown a broad blue band due to ⁴F_9/2→⁶H_15/2 transition and sharp yellow band corresponding to ⁴F_9/2→⁶H_13/2 transition of Dy³⁺ ions. From the concentration dependent PL studies, the optimum concentration of Dy³⁺ ions in YCZ is found to be 1.0 mol%, where intense near white light emission was observed. The Dy³⁺:YCZ nanophosphor has shown relatively better white color properties than the reported Dy³⁺:Y₂O₃ nanophosphor. The yellow to blue intensity ratios, CIE chromaticity coordinates and correlated color temperature studies have shown the possibility of using this compound for white light emission.     

New Initiatives on Comparison of Whole-field Experimental and Numerical Results

Abstract: A simple approach to plot photoelastic fringes in grey scale and also in colour from finite element (FE) results is presented for better recognition and comparison with experiments. This requires proper identification of the plotting variable from FE results. For comparison with transmission photoelasticity, post-processing of principal stress difference is needed and for reflection photoelasticity the principal strain difference is to be used. The importance of the use of appropriate correction factors for comparison with reflection photoelastic results is emphasised. A newer approach to evaluate R _f for complicated geometries is indicated. Plotting of experimental fringes from finite elements is useful not only for validating the numerical model based on experiments but also for validating the experiments. To illustrate this, the problem of an interfacial crack in a bi-material Brazilian disc is discussed.     

Investigations on physical,mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites

Structural uses in the vehicle, aerospace, and sporting goods industries are being supplanted by hybrid composites that utilized natural fibers as reinforcements. The main focus of this work is to fabricate and characterize the ramie, hemp, and kevlar fabric reinforced hybrid vinyl ester composites. The composite laminates were fabricated via economically feasible and flexible hand lay-up technique. Overall six composites were prepared by varying the stacking sequence, including both hybrid and non-hybrid composites. The prepared composites were subjected to physical analysis (density, void fraction), mechanical tests (tensile, flexural, interlaminar shear, and impact test), morphological analysis (scanning electron microscopy), and water absorption test. The hybrid composites exhibited lesser void percentage than the non-hybrid composites. The mechanical properties were maximum for kevlar fabric skinned with core natural fabric reinforced composites (L-5, L-6) due to hybridization of highly strengthened kevlar fabrics. Moreover, the number fabric layers reinforced to achieve the standard thickness also affected the mechanical properties. All composite morphologies exhibited the same failure characteristics, including transverse interlaminar shear cracking, microbuckling, and fiber rip. The texture of the Kevlar yarns is uniform, but the texture of the natural fabric yarns is relatively less uniform. In comparison to the salt water medium, the percentage of water absorbed by composites in normal and distilled water was greater. This is due to the presence and accumulation of salt particles on the surface of the materials, which inhibits the action of water molecules, resulting in a drop in the proportion.     

High Thermal Conductivity Polymer Composites Fabrication through Conventional and 3D Printing Processes: State-of-the-Art and Future Trends

The lifespan and the performance of flexible electronic devices and components are affected by the large accumulation of heat, and this problem must be addressed by thermally conductive polymer composite films. Therefore, the need for the development of high thermal conductivity nanocomposites has a strong role in various applications. In this article, the effect of different particle reinforcements such as single and hybrid form, coated and uncoated particles, and chemically treated particles on the thermal conductivity of various polymers are reviewed and the mechanism behind the improvement of the required properties are discussed. Furthermore, the role of manufacturing processes such as injection molding, compression molding, and 3D printing techniques in the production of high thermal conductivity polymer composites is detailed. Finally, the potential for future research is discussed, which can help researchers to work on the thermal properties enhancement for polymeric materials.     

POTENTIAL OF ERYTHRINA VARIEGATA ORIENTALIS LEAF POWDER FOR THE REMOVAL OF COBALT(II)

Most plant materials are freely and abundantly available and can be used for the removal of heavy metals from effluents. This study investigates the effects of equilibrium, kinetic, and thermodynamic parameters on biosorption of Co(II) ions onto the plant source Erythrina variegata orientalis leaf powder. The biosorption studies are carried out in a batch process. A significant increase in percentage removal of Co(II) is observed as pH value is increased from 2 to 5 and the percentage removal is maximum at pH = 7. The maximum sorption capacity is 8.3 mg/g in the range of variables investigated. The experimental data are well represented by Freundlich and Langmuir isotherms indicating favorable biosorption. The biosorption follows second-order kinetics. The biosorption is exothermic, irreversible, and spontaneous.     

NdFeAsO1−xFx Superconductor – Impact of Fluorine Variation on Microstructure and Transport Properties

Polycrystalline samples of NdFeAsO_1?xF_x (Nd1111) with x = 0, 0.1, 0.2, 0.3, and 0.4 were synthesized using a solid‐state method at ambient pressures. A maximum transition temperature (T_C) of 52.0 K and a J_C of 1050 A/cm² at 12 K were observed for x = 0.3 and 0.4, respectively. The transport and magnetic properties observed for each stoichiometry have remarkable correlation with their corresponding structural and microstructural aspects. Moreover, the superconducting properties exhibited in this material, processed at a relatively low temperature of 1000°C, are competitive as compared to the existing reports wherein high pressures/temperatures are inevitable.