Face expression recognition system based on ripplet transform type II and least square SVM

Multimedia Tools and Applications - This paper discusses the development of an efficient and automated system for the recognition of facial expressions, which is essentially an application...     

Migration cost optimization for service provider legacy network migration to software-defined IPv6 network

This paper studies a problem for seamless migration of legacy networks of Internet service providers to a software-defined networking (SDN)-based architecture along with the transition to the full adoption of the Internet protocol version 6 (IPv6) connectivity. Migration of currently running legacy IPv4 networks into such new approaches requires either upgrades or replacement of existing networking devices and technologies that are actively operating. The joint migration to SDN and IPv6 network is considered to be vital in terms of migration cost optimization, skilled human resource management, and other critical factors. In this work, we first present the approaches of SDN and IPv6 migration in service providers' networks. Then, we present the common concerns of IPv6 and SDN migration with joint transition strategies so that the cost associated with joint migration is minimized to lower than that of the individual migration. For the incremental adoption of software-defined IPv6 (SoDIP6) network with optimum migration cost, a greedy algorithm is proposed based on optimal path and the customer priority. Simulation and empirical analysis show that a unified transition planning to SoDIP6 network results in lower migration cost.     

Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels

Quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Moreover, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).

     

Functionally modified gelatin microspheres as a growth factor’s delivery system: development and characterization

One of the advances in biotechnology has been the development of the capability to produce large quantities of highly purified polypeptides and proteins. Unfortunately, the circulatory half-lives of many of these agents are short, usually of the order of minutes and the time required for a response in tissues is usually long compared to the half-life. Hence, there is always demand for polymeric systems which can deliver the proteins for prolonged period and also to protect the molecules from degradation. The present work was attempted to develop heparin-functionalized gelatin microspheres (HMS) to deliver heparin-binding growth factors particularly for wound-healing applications. The heparin conjugation was carried out using EDC/NHS coupling protocol. Heparin-binding EGF-like growth factor (HB-EGF) was loaded in HMS and its in vitro release behaviour in an environment with or without proteases was studied. The bioactivity of the HB-EGF released from the microspheres was assessed using NIH 3T3 mouse embryonic fibroblast culture. The extent of heparin modification was found to be 1.97 μmol/g of HMS and demonstrated significant protection against enzymatic degradation and sustained release of HB-EGF for more than 10 days. The bioactivity of HB-EGF released from the HMS was retained during the observed release period. The HMS was also found to be non-toxic as determined by calcein AM fluorescent staining. The overall study suggests that the HMS could be used as a growth factor’s delivery component in tissue engineering scaffolds particularly for wound-healing applications.     

Transport phenomena in the electrodeionization of cesium from AMP-PAN

Electrodeionization (EDI) of cesium from cesium-sorbed ammonium molybdophosphate-polyacrylonitrile (AMP-PAN) was investigated by passing eluant through the packed bed of ion-exchange resin in an electrodialysis cell. The deionized cesium from the packed bed was recovered in catholyte by migration and in the eluant by convection. Recovery percentage of Cs by migration increased while the recovery by convection decreased with increase in current density from 20 to 40 mA/cm². Increased eluant concentration resulted in low migration percentage of cesium. Increased catholyte concentration had a negligible effect on total recovery. Apparent diffusion coefficients evaluated using the Nernst–Plank relation increased with increase in current density and catholyte concentration while a decreasing trend was observed with increase in eluant concentration.     

NdFeAsO1−xFx Superconductor – Impact of Fluorine Variation on Microstructure and Transport Properties

Polycrystalline samples of NdFeAsO_1?xF_x (Nd1111) with x = 0, 0.1, 0.2, 0.3, and 0.4 were synthesized using a solid‐state method at ambient pressures. A maximum transition temperature (T_C) of 52.0 K and a J_C of 1050 A/cm² at 12 K were observed for x = 0.3 and 0.4, respectively. The transport and magnetic properties observed for each stoichiometry have remarkable correlation with their corresponding structural and microstructural aspects. Moreover, the superconducting properties exhibited in this material, processed at a relatively low temperature of 1000°C, are competitive as compared to the existing reports wherein high pressures/temperatures are inevitable.