Estimating Glucan,Xylan, and Methylglucuronic Acids in Kraft Pulps of Eucalyptus globulus Using FT-NIR Spectroscopy and Multivariate Analysis

Abstract

Fourier transform near infrared (FT-NIR) associated with multivariate analysis was used to estimate glucan, xylan, 4-O-Methyl-α -D-glucuronic acid (MeGlcA) content, and pulp yield in kraft pulps of Eucalyptus globulus Labill. Several models were applied to correlate chemical composition in samples with the NIR spectral data by means of principal components regression (PCR) or partial least square (PLS) algorithms. Calibration models were built and validated by using all the spectral data and cross-validation methodology. The r_c ² values for the best calibration models for quantification of glucan, xylan, MeGlcA contents and pulp yield were between 0.71–0.92. The model was validated using a set of external samples. The amount of glucan (64–77%), xylan (12–18%), and MeGlcA (204–363 mmol kg pulp^–1) in pulps were predicted with a root mean square error of prediction (RMSEP) of 0.91%, 0.46%, and 15.21% for glucan, xylan, and MeGlcA, respectively. Pulp yield (in the range of 46–70%) was also predicted with good accuracy with a RMSEP of 1.63%. These results suggest that glucan, xylan, MeGlcA composition, and pulp yield in kraft pulps of E. globulus can be adequately estimated by NIR spectroscopy for laboratory or industrial applications. NIR predictions can also provide useful and cost-effective tools for the rapid screening of large numbers of samples.     

Identification of the Trail Pheromone of the Pavement Ant Tetramorium immigrans (Hymenoptera: Formicidae)

Journal of Chemical Ecology - Four species of Tetramorium pavement ants are known to guide foraging activities of nestmates via trail pheromones secreted from the poison gland of worker ants, but...     

Adsorption and photocatalytic degradation of phenol and 2,4 dichlorophenoxiacetic acid by Mg–Zn–Al layered double hydroxides

Mg–Zn–Al layered double hydroxides (LDHs) with varying amounts of zinc were prepared by the coprecipitation method. Solids were analyzed by XRD and N₂ physisorption, confirming the formation of pure LDH phase; and the production of mixed oxides with high specific surface areas (182–276 m² g⁻¹) after calcination. Band gap energy was also determined, presenting the expected decreasing tendency on increasing zinc amounts. These mixed oxides were tested both for the adsorption of 2,4 dichlorophenoxiacetic acid (2,4-d) and for the photocatalytic degradation of 2,4-d and phenol. Nearly total (97%) degradation of initial 1.45 mmol L⁻¹ of 2,4-d, with 1 g calcined LDH per liter, was accomplished in 9 h, while phenol half-life was as short as 3.5 h, with the catalyst with lowest zinc amount (5 wt.%). Langmuir adsorption isotherms are presented. Solids were also characterized by XRD and FTIR analysis after photocatalytic and adsorption activity, to determine the presence of 2,4-d. The versatility of LDH decomposition products in the elimination of different contaminants by different mechanisms puts them forward as a viable alternative for environmental remediation.     

Ovule Development and in Planta Transformation of Paphiopedilum Maudiae by Agrobacterium-Mediated Ovary-Injection

In this paper, the development of the Paphiopedilum Maudiae embryo sac at different developmental stages after pollination was assessed by confocal laser scanning microscopy. The mature seeds of P. Maudiae consisted of an exopleura and a spherical embryo, but without an endosperm, while the inner integument cells were absorbed by the developing embryo. The P. Maudiae embryo sac exhibited an Allium type of development. The time taken for the embryo to develop to a mature sac was 45-50 days after pollination (DAP) and most mature embryo sacs had completed fertilization and formed zygotes by about 50–54 DAP. In planta transformation was achieved by injection of the ovaries by Agrobacterium, resulting in 38 protocorms or seedlings after several rounds of hygromycin selection, corresponding to 2, 7, 5, 1, 3, 4, 9, and 7 plantlets from Agrobacterium-mediated ovary-injection at 30, 35, 42, 43, 45, 48, 50, and 53 DAP, respectively. Transformation efficiency was highest at 50 DAP (2.54%), followed by 2.48% at 53 DAP and 2.45% at 48 DAP. Four randomly selected hygromycin-resistant plants were GUS-positive after PCR analysis. Semi-quantitative PCR and quantitative real-time PCR analysis revealed the expression of the hpt gene in the leaves of eight hygromycin-resistant seedlings following Agrobacterium-mediated ovary-injection at 30, 35, 42, 43, 45, 48, 50, and 53 DAP, while hpt expression was not detected in the control. The best time to inject P. Maudiae ovaries in planta with Agrobacterium is 48-53 DAP, which corresponds to the period of fertilization. This protocol represents the first genetic transformation protocol for any Paphiopedilum species and will allow for expanded molecular breeding programs to introduce useful and interesting genes that can expand its ornamental and horticulturally important characteristics.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

New quality criteria in wastewater reuse : The case of Gran Canaria

Wastewater reuse plays a key role in this vital cycle of water because it is able to reduce the wastewater spilled. Simultaneously, the supply of water for specific uses is increased. A new regulation (Royal Decree 1620/2007) came into force in Spain in December 2007 and regulates the basic conditions for the wastewater reuse and establishes the required criteria of quality to waters according to use.In the present paper, different kinds of tertiary treatments in reuse of wastewater are described. We focused on the applied tertiary treatments in most wastewater treatment plants of Gran Canaria Island. Particularly, we analysed Hoya del Pozo wastewater treatment plant due to its wide number of technologies and processes.Finally, we reviewed the quality criteria used in the regenerated waters, in agreement with the new regulations.     

Catalytic performance of silica-aluminas synthesised with the help of chitosan biopolymer

Mesoporous amorphous silica-aluminas were synthesised with standard aluminium and silicon sources by means of the formation of inorganic–organic composites with the addition of chitosan biopolymer, and compared to analogous catalysts synthesised conventionally. Some catalysts were subjected to hydrothermal treatment. The resulting specific surface areas were from 480 to 573 m²/g in the untreated samples and 300–430 m²/g in the hydrotreated catalysts, average pore sizes ranging from 32 to 100 Å with sharp, unimodal distributions. The chitosan materials showed higher specific surface areas and larger pore sizes than those of their non-chitosan counterparts. The most important differences in the acidic properties were in the relationships between tetrahedral and octahedral aluminium atoms, the chitosan materials having higher relative amounts of tetrahedral aluminium than the conventional silica-aluminas. Evidences of stabilization in the physical and chemical properties were observed in the chitosan-containing catalysts. The catalytic performance was evaluated with the conversion of tri-isopropylbenzene at 400 °C, to assess activity and accessibility, and cyclohexene at 300 °C, to assess hydrogen transfer properties. The highest activity and accessibility was observed in the hydrotreated, chitosan-containing catalyst, while hydrogen transfer capabilities were similar to those of medium unit cell sizes, equilibrium commercial FCC catalysts.