Performance evaluation of canine-associated Bacteroidales assays in a multi-laboratory comparison study

The contribution of fecal pollution from dogs in urbanized areas can be significant and is an often underestimated problem. Microbial source tracking methods (MST) utilizing quantitative PCR of dog-associated gene sequences encoding 16S rRNA of Bacteroidales are a useful tool to estimate these contributions. However, data about the performance of available assays are scarce. The results of a multi-laboratory study testing two assays for the determination of dog-associated Bacteroidales (DogBact and BacCan-UCD) on 64 single and mixed fecal source samples created from pooled fecal samples collected in California are presented here. Standardization of qPCR data treatment lowered inter-laboratory variability of sensitivity and specificity results. Both assays exhibited 100% sensitivity. Normalization methods are presented that eliminated random and confirmed non-target responses. The combination of standardized qPCR data treatment, use of normalization via a non-target specific Bacteroidales assay (GenBac3), and application of threshold criteria improved the calculated specificity significantly for both assays. Such measures would reasonably improve MST data interpretation not only for canine-associated assays, but for all qPCR assays used in identifying and monitoring fecal pollution in the environment.     

Composition of bacterial and archaeal communities in freshwater sediments with different contamination levels (Lake Geneva, Switzerland)

The aim of this study was to compare the composition of bacterial and archaeal communities in contaminated sediments (Vidy Bay) with uncontaminated sediments (Ouchy area) of Lake Geneva using 16S rRNA clone libraries. Sediments of both sites were analysed for physicochemical characteristics including porewater composition, organic carbon, and heavy metals. Results show high concentrations of contaminants in sediments from Vidy. Particularly, high contents of fresh organic matter and nutrients led to intense mineralisation, which was dominated by sulphate-reduction and methanogenesis. The bacterial diversity in Vidy sediments was significantly different from the communities in the uncontaminated sediments. Phylogenetic analysis revealed a large proportion of Betaproteobacteria clones in Vidy sediments related to Dechloromonas sp., a group of dechlorinating and contaminant degrading bacteria. Deltaproteobacteria, including clones related to sulphate-reducing bacteria and Fe(III)-reducing bacteria (Geobacter sp.) were also more abundant in the contaminated sediments. The archaeal communities consisted essentially of methanogenic Euryarchaeota, mainly found in the contaminated sediments rich in organic matter. Multiple factor analysis revealed that the microbial community composition and the environmental variables were correlated at the two sites, which suggests that in addition to environmental parameters, pollution may be one of the factors affecting microbial community structure.     

Diffusive gradients in thin films predicts crop response better than calcium-acetate-lactate extraction

Nutrient Cycling in Agroecosystems - Soil P testing has been widely used to predict crop yields, P uptake, and fertilizer demands in agriculture. Diffusive gradients in thin films (DGT) provides a...     

Comparative Assay of Antioxidant Packages for Dimer of Estolide Esters

A series of 26 different antioxidants and commercial antioxidant packages designed for petroleum‐based materials, containing both natural and synthetic‐based materials, were evaluated with dimeric coconut‐oleic estolide 2‐ethylhexyl ester (2‐EH), a bio‐based material. The different antioxidants were categorized into different classes of phenolic, aminic, and blended/others materials. The oxidation onset temperatures (OT) using non‐isothermal pressurized differential scanning calorimetry (PDSC) were measured and recorded under previously reported standard conditions. The aminic series gave the best resistance to oxidation as defined by the PDSC method with OT of 246.6 and 244.7 °C for the best two performers, which was a 38 °C improvement over the uninhibited or unformulated dimer estolide material. The phenolic series, containing most of the naturally occurring antioxidants, was the least successful formulation package for the dimer estolide. The blended/other materials, which were specifically designed for petroleum‐based lubricants, did not have the best OT, since the estolides and other bio‐based materials interact differently than their petroleum counterparts. A number of potential antioxidants have been identified as useful additives for the estolides esters. The OT of the estolide and formulated materials correlated well with other bio‐based materials such as biodiesel.     

Degradation of phthalate esters in an activated sludge wastewater treatment plant

Efficient removal of phthalate esters (PE) in wastewater treatment plants (WWTP) is becoming an increasing priority in many countries. In this study, we examined the fate of dimethyl phthalate (DMP), dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), and di-(2-ethylhexyl) phthalate (DEHP) in a full scale activated sludge WWTP with biological removal of nitrogen and phosphorus. The mean concentrations of DMP, DBP, BBP, and DEHP at the WWTP inlet were 1.9, 20.5, 37.9, and 71.9 μg/L, respectively. Less than 0.1%, 42%, 35%, and 96% of DMP, DBP, BBP, and DEHP was associated with suspended solids, respectively. The overall microbial degradation of DMP, DBP, BBP, and DEHP in the WWTP was estimated to be 93%, 91%, 90%, and 81%, respectively. Seven to nine percent of the incoming PE were recovered in the WWTP effluent. Factors affecting microbial degradation of DEHP in activated sludge were studied using [U-¹⁴C-ring] DEHP as tracer. First order rate coefficients for aerobic DEHP degradation were 1.0×10⁻², 1.4×10⁻², and 1.3×10⁻³ at 20, 32, and 43 °C, respectively. Aerobic degradation rates decreased dramatically under aerobic thermophilic conditions (<0.1×10⁻² h⁻¹ at 60 °C). The degradation rate under anoxic denitrifying conditions was 0.3×10⁻² h⁻¹, whereas the rate under alternating conditions (aerobic-anoxic) was 0.8×10⁻² h⁻¹. Aerobic DEHP degradation in activated sludge samples was stimulated 5-9 times by addition of a phthalate degrading bacterium. The phthalate degrading bacterium was isolated from activated sludge, and maintained a capacity for DEHP degradation while growing on vegetable oil. Collectively, the results of the study identified several controls of microbial PE degradation in activated sludge. These controls may be considered to enhance PE degradation in activated sludge WWTP with biological removal of nitrogen and phosphorus.     

MINLP‐Optimierung des Hybridverfahrens Destillation/Schmelzkristallisation

The hybrid separation process distillation/melt crystallization offers a cost wise attractive alternative compared to conventional distillation processes. In this work, the systematic and cost optimal design of this combination process is considered. The focus is on the optimal choice of operating and structural degrees of freedom.     

Multicell converters: basic concepts and industry applications

Multicell power converters were introduced ten years ago. This paper summarizes the main results obtained through the research done on these converters over this period: topology and derivation of multicell choppers and voltage-source inverters; harmonics cancellation; open-loop modulation techniques; self-balancing understanding; and optimization. During this same period, industrial products using this technique have been developed and the corresponding know-how has contributed to the field in various ways, such as modular design, low inductance busbars, specific drivers, etc.     

Misalignment-Induced Bending in Pin-Loaded Tensile-Creep Specimens

In this paper, we have examined the possibility that elastic bending induced by load misalignment can affect creep measurements on pin-loaded tension specimens of silicon nitride (Si₃N₄). We have shown that elastic bending at room temperature can be as great as 42% of the axial strain when clean pins were used but was reduced to ∼3% when lubricated pins were used. Creep tests at the same applied stress and temperature were conducted on two groups of Si₃N₄ test specimens: one group used clean pins, and the other group used lubricated pins. By measuring the shapes of the specimens before and after the creep tests, we have determined that the loading holes were slightly misaligned before the creep tests and that small amounts of bending were induced by the creep tests. Bending occurred both in the gauge section of the specimen and in the transition region between the gauge section and the heads of the specimen (the latter phenomenon is defined as hinge bending). Our study indicated that the secondary creep rate, the hinge bending, and the bending of the gauge section was not dependent on pin lubrication, because the results from the clean and lubricated groups were statistically indistinguishable. Hinge bending was dependent on initial misalignment of the loading holes, whereas bending of the gauge section was independent of such factors.     

Electrochemical characterization of electrolytes for lithium-ion batteries based on lithium difluoromono(oxalato)borate

The salt lithium difluoromono(oxalato)borate (LiDFOB) showed some promising results for lithium-ion-cells. It was synthesized via a new synthetic route that avoids chloride impurities. Here we report the properties of its solutions (solvent blend ethylene carbonate/diethyl carbonate (3:7, mass ratio), including its conductivity, cationic transference number, hydrolysis, Al-current collector corrosion-protection ability and its cycling performance with some electrode materials. Some Al-corrosion studies were also performed with the help of our recently developed computer controlled impedance scanning electrochemical quartz crystal microbalance (EQCM) that proofed to be a useful tool for battery material investigations.