Optomechanical Processing of Silver Colloids: New Generation of Nanoparticle–Polymer Composites with Bactericidal Effect

The properties of materials at the nanoscale open up new methodologies for engineering prospective materials usable in high-end applications. The preparation of composite materials with a high content of an active component on their surface is one of the current challenges of materials engineering. This concept significantly increases the efficiency of heterogeneous processes moderated by the active component, typically in biological applications, catalysis, or drug delivery. Here we introduce a general approach, based on laser-induced optomechanical processing of silver colloids, for the preparation of polymer surfaces highly enriched with silver nanoparticles (AgNPs). As a result, the AgNPs are firmly immobilized in a thin surface layer without the use of any other chemical mediators. We have shown that our approach is applicable to a broad spectrum of polymer foils, regardless of whether they absorb laser light or not. However, if the laser radiation is absorbed, it is possible to transform smooth surface morphology of the polymer into a roughened one with a higher specific surface area. Analyses of the release of silver from the polymer surface together with antibacterial tests suggested that these materials could be suitable candidates in the fight against nosocomial infections and could inhibit the formation of biofilms with a long-term effect.     

Investigation on the mechanical properties and oil resistance of sulfur cured nitrile rubber/hydrogenated nitrile butadiene rubber blends

Nitrile rubber (NBR)/hydrogenated nitrile butadiene rubber (HNBR) blends with various ratios were compounded with internal mixer and two-roll open mill. Mechanical properties and low-temperature performance (TR10) of the NBR/HNBR blends after aging under different conditions were investigated. Furthermore, equilibrium swelling test and moving die rheometer (MDR) test were used to systematically investigate the effects of HNBR dosage on the crosslink densities and curing behaviors. Vulcanization torque and crosslink densities decreased with an increase in HNBR content. The crosslink density of pure HNBR is higher than that of pure NBR, which is related to the macromolecular structures of the rubber. Compression sets of the NBR/HNBR vulcanizates were correlated with HNBR dosage indicating a linear relationship. Low-temperature performance of the NBR/HNBR blends was improved after being aged in the synthetic hydrocarbon hydraulic oils (SH-1 and SH-2). This work shows that the low-temperature performance and oil resistance could be better balanced by blending NBR with HNBR, while the mechanical properties maintain relatively high level.     

Properties of silver nanostructure-coated PTFE and its biocompatibility

Silver nanolayers were sputtered on polytetrafluoroethylene (PTFE) and subsequently transformed into discrete nanoislands by thermal annealing. The Ag/PTFE composites prepared under different conditions were characterized by several complementary methods (goniometry, UV-visible spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy), and new data on the mechanism of Ag layer growth and Ag atom clustering under annealing were obtained. Biocompatibility of selected Ag/PTFE composites was studied in vitro using vascular smooth muscle cell (VSMC) cultures. Despite of the well-known inhibitory properties of silver nanostructures towards broad spectrum of bacterial strains and cells, it was found that very thin silver coating stimulates both adhesion and proliferation of VSMCs.     

Lead and/or Lead Oxide Nanoparticle Generation for Inhalation Experiments

A method of the continual generation of lead or lead oxide nanoparticles for potential subsequent inhalation experiments with laboratory animals was investigated. We examined the thermal decomposition and oxidation of lead bis(2,2,6,6-tetramethyl-3,5-heptanedionate) in an externally heated tube reactor as well as the evaporation and condensation of metallic lead. The particle production dependence on experimental conditions was investigated using a scanning mobility particle sizer (SMPS), and the particle characteristics were studied using transmission electron microscopy (TEM), high-resolution TEM (HRTEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic absorption spectroscopy (AAS), elemental and organic carbon analysis (EC/OC), X-ray photoelectron spectrometry (XPS), and X-ray diffraction (XRD) methods. The evaporation/condensation was evaluated as being the most suitable for inhalation experiments due to its simplicity, high production rate, and the well-defined composition of the nanoparticles.

Copyright 2015 American Association for Aerosol Research     

"Soft and rigid" dithiols and Au nanoparticles grafting on plasma-treated polyethyleneterephthalate

ABSTRACT: Surface of polyethyleneterephthalate (PET) was modified by plasma discharge and subsequently grafted with dithiols (1, 2-ethanedithiol (ED) or 4, 4'-biphenyldithiol) to create the thiol (-SH) groups on polymer surface. This "short" dithiols are expected to be fixed via one of -SH groups to radicals created by the plasma treatment on the PET surface. "Free" -SH groups are allowed to interact with Au nanoparticles. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrokinetic analysis (EA, zeta potential) were used for the characterization of surface chemistry of the modified PET. Surface morphology and roughness of the modified PET were studied by atomic force microscopy (AFM). The results from XPS, FTIR, EA and AFM show that the Au nanoparticles are grafted on the modified surface only in the case of biphenyldithiol pretreatment. The possible explanation is that the "flexible" molecule of ethanedithiol is bounded to the activated PET surface with both -SH groups. On the contrary, the "rigid" molecule of biphenyldithiol is bounded via only one -SH group to the modified PET surface and the second one remains "free" for the consecutive chemical reaction with Au nanoparticle. The gold nanoparticles are distributed relatively homogenously over the polymer surface.     

Restraining of calcium contamination in near‐net shape alumina ceramics during slip casting

The traditional method for shaping ceramics is by slip casting on gypsum molds; however, its application for near‐net shaping of ceramic components is limited due to contamination by calcium ions. The focus of this study is the modification of the mold to limit Ca²⁺ contamination and to maintain favorable sucking properties. Cement was added to a standard gypsum mold to suppress its erosion, and a decrease in the sucking rate was observed due to its reduced macroporosity. The highest values of green densities were obtained at gypsum/cement weight ratios of 90/10 and 70/30. The microstructure analysis showed that alumina blocks prepared from the molds containing higher quantities of cement (30 or 50 wt%) were resistant to abnormal grain growth caused by Ca²⁺ contamination from the gypsum. The gypsum/cement mixtures for making molds for slip casting significantly limit mold erosion due to a lower sucking rate and abnormal grain growth of the slip cast samples because of the decreased diffusivity of Ca²⁺ ions. Therefore, the present modification of the mold renders the slip casting method more suitable for the near‐net shaping of ceramics.     

Thermal Conductivity Measurement of Bulk Solids

The coefficient of thermal conductivity of particulates and powders is of great importance in process engineering. The prediction of thermal properties of powders using empirical equations is still difficult due to the wide range of specific attributes. This article describes a new measurement methodology for a laboratory device that can be used to determine the thermal conductivity of bulk solids. The presented results show that the created device is highly applicable in industrial practice. It is possible to examine the coefficient of thermal conductivity depending on the sample temperature, the granulometry results and the morphological composition, the moisture content, the degree of consolidation, and other variables that may enter into the entire process and affect it significantly.     

翻新轮胎胎面胶配方和胎面花纹对汽车主动安全性的影响

轮胎翻新是废旧轮胎的一种利用手段。在轮胎翻新过程中,旧轮胎胎面花纹是通过覆盖一层胎面胶料进行修复的。翻新轮胎性能的完善以及其价格比新轮胎低使其被相当频繁地使用,但安装翻新轮胎的汽车经常发生车祸。在轮胎翻新时,关于翻新轮胎性能如何影响交通安全方面的信息非常重要。在给定路况条件下,轮胎的制动性能、抓着性能和行驶操纵性能等方面的知识令人关注。     

Electrocrystallisation of metallic films under the influence of an external homogeneous magnetic field—Early stages of the layer growth

The effects of a uniform magnetic field on the early stages of Ag, Fe and CoFe alloys electrocrystallisation have been investigated. It was found for Fe and CoFe alloys, irrespective of the applied parameters, that early stages of the layer growth can be characterised by a nucleation and 3D diffusion controlled growth. The influence of the deposition parameters on the nucleation behaviour was studied on the basis of the Sharifker-Mostany (SM) model. A modification to the existing model has been proposed in order to model alloy systems. It is reported that a magnetic field superposed parallel to the electrode surface has a significant influence on the early stages of Fe and CoFe alloys growth. The growth of the nuclei is enhanced by the Lorentz-force-driven convection, while the nucleation processes remain unaffected. The hydrodynamic origin of these phenomena is confirmed by independent rotating disk electrode (RDE) investigations. Moreover, the proposed mechanism of a magnetic field influence on the 3D diffusion controlled growth is supported by a microscopic investigation of Ag deposits. It was found that Ag deposits obtained without a magnetic field superposition are characterised by a relatively large number of small 3D growth centres, whereas the deposits obtained in a field show fewer 3D centres but their size is greatly increased.     

Lasioglossins: Three Novel Antimicrobial Peptides from the Venom of the Eusocial Bee Lasioglossum laticeps (Hymenoptera: Halictidae)

Three novel structurally related pentadecapeptides, named lasioglossins, were isolated from the venom of the eusocial bee Lasioglossum laticeps. Their primary sequences were established as H‐Val‐Asn‐Trp‐Lys‐Lys‐Val‐Leu‐Gly‐Lys‐Ile‐Ile‐Lys‐Val‐Ala‐Lys‐NH₂ (LL‐I), H‐Val‐Asn‐Trp‐Lys‐Lys‐Ile‐Leu‐Gly‐Lys‐Ile‐Ile‐Lys‐Val‐Ala‐Lys‐NH₂ (LL‐II) and H‐Val‐Asn‐Trp‐Lys‐Lys‐Ile‐Leu‐Gly‐Lys‐Ile‐Ile‐Lys‐Val‐Val‐Lys‐NH₂ (LL‐III). These lasioglossins exhibited potent antimicrobial activity against both Gram‐positive and Gram‐negative bacteria, low haemolytic and mast cell degranulation activity, and a potency to kill various cancer cells in vitro. The lasioglossin CD spectra were measured in the presence of trifluoroethanol and sodium dodecyl sulfate solution and indicated a high degree of α‐helical conformation. NMR spectroscopy, which was carried out in trifluoroethanol/water confirmed a curved α‐helical conformation with a concave hydrophobic and convex hydrophilic side. To understand the role of this bend on biological activity, we studied lasioglossin analogues in which the Gly in the centre of the molecule was replaced by other amino acid residues (Ala, Lys, Pro). The importance of the N‐terminal part of the molecule to the antimicrobial activity was revealed through truncation of five residues from both the N and C termini of the LL‐III peptide. C‐terminal deamidation of LL‐III resulted in a drop in antimicrobial activity, but esterification of the C terminus had no effect. Molecular modelling of LL‐III and the observed NOE contacts indicated the possible formation of a bifurcated H‐bond between hydrogen from the Lys15 CONH peptide bond and one H of the C‐terminal CONH₂ to the Ile11 oxygen atom. Such interactions cannot form with C‐terminal esterification.