Signalling and obfuscation for congestion control

We aim to reduce the social cost of congestion in many smart city applications. In our model of congestion, agents interact over limited resources after receiving signals from a central agent that observes the state of congestion in real time. Under natural models of agent populations, we develop new signalling schemes and show that by introducing a non-trivial amount of uncertainty in the signals, we reduce the social cost of congestion, i.e., improve social welfare. The signalling schemes are efficient in terms of both communication and computation, and are consistent with past observations of the congestion. Moreover, the resulting population dynamics converge under reasonable assumptions.     

The study on the model reference adaptive control with proportional derivative action

This article presents a study on the novel method of model reference adaptive control (MRAC). As a new contribution, the derivative action is included into MRAC control to improve the controller performance and efficiency. The stability is analysed using a recent technique called immersion and invariance. The simulations of derived laws are presented based on nonlinear models.     

Structure and properties of 6061 + 26 mass% Si aluminum alloy produced via coupled rapid solidification and KOBO-extrusion of powder

Experiments on mechanical consolidation of rapidly solidified (RS) powder of 6061 + 26 mass% Si alloy were performed using the oscillating-die extrusion method. The RS powder was wrapped in thin-wall 6061-alloy cup 35 mm in diameter and vacuum-compressed by means of 100 ton press. Bars 8 mm in diameter were extruded with cross-section reduction of λ = 19 without any preheating of the charge. Tubes with a diameter/wall thickness of 14 mm/1 mm and cross-section reduction of λ = 33 were also manufactured with success. TEM/STEM observations revealed a very fine structure of as-extruded material and bimodal distribution of quasi-spherical silicon particles. Statistical analysis revealed a silicon fine fraction of 0.1–0.7 μm and a coarse fraction 2.1–2.5 μm in diameter. Examination by means of TEM did not reveal any significant changes in the morphology of the silicon particles, even when a high extrusion ratio and the material annealing after deformation were used. Hot compression tests on as-extruded rods (λ = 19) and preliminary annealed samples were performed at a constant true strain rate of 5 × 10^?3 s^?1 within the temperature range of 293–823 K. High strength of the material and relatively high ductility of samples deformed by compression up to ?_t ? 0.4 were observed. The maximum flow stress value for as-extruded material was reduced with deformation temperature from ～390 to ～3.5 MPa for 293 and 823 K, respectively. Annealing of the samples at 773 K/30 min was found to reduce the maximum flow stress by 30–40%. Tensile strengths of similar as-cast alloys and materials manufactured by means of other powder metallurgy methods were shown for the purpose of comparison.     

Nucleation and growth of the electrodeposited iron layers in the presence of an external magnetic field

The effect of an uniform magnetic field with a flux density up to 1 T and different configurations relative to the electrode surface on the electrocrystallization of Fe on polycrystalline Au(1 1 1) from acidic sulphate electrolyte has been investigated. It was found, irrespective of the applied parameters, that the deposition proceeds through successive nucleation and growth steps. The first one related to 2D growth was followed by a second nucleation and 3D diffusion controlled growth. At potential of −1500 and −1550 mV_MSE nucleation proceeds via a progressive mode, while at −1650 mV_MSE it follows an instantaneous mode. A strong influence of the parallel-to-electrode magnetic field on the nucleation processes was found for the progressive mode, which leads to the increase of the growth rate and as a consequence to retardation of the nucleation rate of the 3D step. Additionally, in this configuration at a sufficiently high magnetic flux density a third nucleation step could be observed (3D), which was found to be also affected by a magnetic field. No effect of a perpendicular-to-electrode magnetic field on the nucleation has been observed. The effects of a magnetic field on the nucleation and growth processes are discussed with respect to the magnetohydrodynamic effect (MHD) and confirmed by rotating disc electrode (RDE) experiments.     

MA‐NOTMP: A Triazacyclononane Trimethylphosphinate Based Bifunctional Chelator for Gallium Radiolabelling of Biomolecules

In the past few years, gallium‐68 has demonstrated significant potential as a radioisotope for positron emission tomography (PET), and the optimization of chelators for gallium coordination is a major goal in the development of radiopharmaceuticals. Methylaminotriazacyclononane trimethylphosphinate (MA‐NOTMP), a new C‐functionalized triazacyclononane derivative with phosphinate pendant arms, presents excellent coordination properties for ⁶⁸Ga (low ligand concentration, labelling at low pH even at room temperature). A “ready‐to‐be‐grafted” bifunctional chelating agent (p‐NCS‐Bz‐MA‐NOTMP) was prepared to allow ⁶⁸Ga labelling of sensitive biological vectors. Conjugation to a bombesin_(7–14) derivative was performed, and preliminary in vitro experiments demonstrated the potential of MA‐NOTMP in the development of radiopharmaceuticals. This new chelator is therefore of major interest for labelling sensitive biomolecules, and further in vivo experiments will soon be performed.     

Assessing similarity models for human‐motion retrieval applications

The development of motion capturing devices poses new challenges in the exploitation of human‐motion data for various application fields, such as computer animation, visual surveillance, sports, or physical medicine. Recently, a number of approaches dealing with motion data have been proposed, suggesting characteristic motion features to be extracted and compared on the basis of similarity. Unfortunately, almost each approach defines its own set of motion features and comparison methods; thus, it is hard to fairly decide which similarity model is the most suitable for a given kind of human‐motion retrieval application. To cope with this problem, we propose the human motion model evaluator, which is a generic framework for assessing candidate similarity models with respect to the purpose of the target application. The application purpose is specified by a user in form of a representative sample of categorized motion data. Respecting such categorization, the similarity models are assessed from the effectiveness and efficiency points of view using a set of space‐complexity, information‐retrieval, and performance measures. The usability of the framework is demonstrated by case studies of three practical examples of retrieval applications focusing on recognition of actions, detection of similar events, and identification of subjects. Copyright © 2015 John Wiley & Sons, Ltd.     

Static mixers for laminar flow reactors with low aspect ratios

Conventional static mixers typically require high length to diameter ratios to be effective. This paper considers static mixers design to increase first appearance times in short, fat reactors. Three types are considered: conical baffles and annular baffles for tubular reactors and axial baffles for reactors with a rectangular cross-section. Relatively simple designs allow production increases (or reactor volume decreases) on the order of 20–50%.     

Aluminum control of phosphorus sorption by lake sediments

Release of reactive (phosphate-like) phosphorus (P) from freshwater sediments represents a significant internal P source for many lakes. Hypolimnetic P release occurs under reducing conditions that cause reductive dissolution of ferric hydroxide [Fe(OH)3]. This hypolimnetic P release may be naturally low or artificially reduced by sediment with naturally high or artificially elevated concentrations of aluminum hydroxide [Al(OH)3]. We presentfield and laboratory data for a common extraction analysis of sediments from 43 lakes differing in trophic status, pH regime, climate, and P loading. The results indicate that a simple sequential extraction of sediment may be a useful predictor of sediment's ability to release P. Sequential extractions of sediment P, Al, and Fe by water (H2O), bicarbonate-dithionite (BD), and NaOH (at 25 degrees C) showed that negligible amounts of P would be released from lake sediments during hypolimnetic anoxia if either (1) the molar Al(NaOH-25):Fe(BD) ratio is > 3 or (2) the molar Al(NaOH-25):P(H2O+BD) ratio is > 25. These ratios can be used as operational targets for estimation of sediment P release potential and Al dosing of P-rich sediment to prevent hypolimnetic P release under anoxic conditions.