Electrical Conductance in Biological Molecules

Nucleic acids and proteins are not only biologically important polymers. They have recently been recognized as novel functional materials surpassing conventional materials in many aspects. Although Herculean efforts have been undertaken to unravel fine functioning mechanisms of the biopolymers in question, there is still much more to be done. Here the topic of biomolecular charge transport is presented with a particular focus on charge transfer/transport in DNA and protein molecules. The experimentally revealed details, as well as the presently available theories, of charge transfer/transport along these biopolymers are critically reviewed and analyzed. A summary of the active research in this field is also given, along with a number of practical recommendations.     

An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M–K analysis

In the present paper, a comprehensive study on the prediction of forming limit diagrams (FLDs) for an AA3003-O aluminium alloy is developed theoretically and experimentally. For obtaining the experimental FLDs, an out-of-plane formability test was performed based on the technique proposed by Ozturk and Lee [F. Ozturk, D. Lee, J. Mater. Process. Technol. 170 (2005) 247–253]. The classical Marciniak–Kuczynski (M–K) model and some new yield criteria are utilized to simulate the necking phenomenon and calculate the limit strains theoretically. The employed yield functions are: the BBC2000, BBC2002, and BBC2003 yield criteria proposed by Banabic et al. [D. Banabic, S.D. Comsa, T. Balan, in: Proceedings of the Cold Metal Forming 2000 Conference, Cluj-Napoca, 2000, p. 217; D. Banabic, T. Kuwabara, T. Balan, D.S. Comsa, D. Julean, Int. J. Mech. Sci. 45 (2003) 797–811; D. Banabic, H. Aretz, D.S. Comsa, L. Paraianu, Int. J. Plast. 21 (2005) 493–512]. To calibrate and determine each particular coefficients of performed yield functions an appropriate error-function is defined and minimized by a Newton algorithm. To compare the calculated yield stresses and r-values with experimental data a relative root mean square deviation method presented by Leacock [Alan G. Leacock, J. Mech. Phys. Solids 54 (2006) 425–444] is used. Work-hardening effects on the FLD are analyzed by using Swift and Voce hardening laws. The effect of yield surface on the prediction of numerical FLDs and the number of experimental anisotropy parameters on the accuracy of yield functions are also studied.     

A miniaturised monopole antenna for ultra-wide band applications with band-notch filter

This study presents a new miniaturised printed monopole antenna. The size of the antenna is 18 x 18 mm². First simple design rules are given to arrive at an initial design for the antenna, then the antenna parameters are optimised for utilisation in ultra wide band (UWB) applications. The performance parameters like voltage standing wave ratio (VSWR) of the single antenna as well as transmission function, group delay and the fidelity factor of a two-antenna system are calculated and measured. It is shown that the band-notched performance can be obtained from the designed antenna by introducing simple p-shape or V-shape slots in its radiating element. Good agreements between simulated and measured results are observed.     

Polyaniline-supported acid as an efficient and reusable catalyst for a one-pot synthesis of β-acetamido ketones via a four-component condensation reaction

Polyaniline-supported acid salts such as polyaniline-hydrochloride, polyaniline-sulfate and polyaniline-nitrate were prepared by oxidation of aniline using ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalyst for the preparation of β-acetamido ketones. Polyaniline-sulfate salt was found to be the best catalyst for the preparation of β-acetamido ketones. Present methodology offers several advantages, such as cheaper process, easy synthesis of stable catalyst, simple work-up procedure, and excellent activity with less amount of catalyst and in addition, the catalyst can be easily recovered after completion of the reaction and reusable without affecting its activity.     

Reducing the demands of heating and cooling in Iranian hospitals

A previous study by the authors concluded that the optimal indoor air temperature for satisfying the wide range of occupancy needs in Iranian hospitals falls in a range from 24 °C to 26 °C. Other measures are also needed to achieve thermal comfort at this temperature for all occupants. This study examines, through modelling, a range of passive building fabric techniques in two monitored case study hospitals to examine how we might best achieve this range of indoor air temperatures, and reduce reliance on the heating and cooling systems. Both case study buildings are simulated using HTB2 in their original and modified states. Modifications are limited to changing the fabric of the buildings in the simulated models. The simulations show that it is theoretically possible to reduce the average heating demand in the two buildings to 9% of the original demand by area. Similarly the cooling demand can be reduced in both buildings to 73% of the original demand by area.     

Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.     

Optimization of STM/FIM nanotip aspect ratio based on the Taguchi method

This paper presents optimization of electrochemical etching parameters to achieve the optimum aspect ratio of the scanning tunneling microscopy/field ion microscopy tungsten nanotip by using Taguchi method. The combination of optimum level of process parameters was obtained by using the analysis of signal-to-noise ratio. The level of importance of the process parameters on the nanotip aspect ratio was determined by using analysis of variance. It was found that the optimum level of process parameters are electrolyte concentration of 2 M/lit, wire immersion length of 2.5 mm, cathode tube inner diameter of 40 mm, and voltage of 3.5 V. Within the range of experiments and the process parameters in terms of impact significance were found to be electrolyte concentration, process voltage, wire immersion length, and inner diameter of cathode tube, respectively. By using the optimum level of the process parameters, the nanotip aspect ratio was enhanced by 263% in comparison to the mean value of the experimental results. The nanotip aspect ratio of up to 163:1 was obtained in the present research.     

Synthesis of tetrazole from α, β—Unsaturated carbonyl fatty acid

Methyl 4-oxo-trans-2-octadecenoate (II), when treated with excess hydrazoic acid in the presence of BF₃-etherate, produced 66% methyl 5-aza-nonadec-trans-2-enoate (4,5-d)-tetrazole (III), 10% methyl 5-aza-nonadec-4-oxo-trans-2-enoate (IV) and 7% pentadecamide (V). Individual products were characterized by spectral and elemental methods.     

Synthesis ofGEM-dibromocyclopropanoid fatty esters using phenyl (tribromomethyl) mercury

Thegem-dibromocyclopropanation of naturally occurring unsaturated hydroxy fatty esters, methyl ricinoleate (I) and methyl isoricinoleate (II), has been undertaken to provide compounds which might have potential utility. Phenyl(tribromomethyl)mercury reacts only with the carbon-carbon double bond of each substrate, leaving the OH group intact. The product, methyl 9,10-dibromomethylene-12-hydroxyoctadecanoate (III) and methyl 12,13-dibromomethylene-9-hydroxyoctadecanoate (IV), obtained from I and II, respectively, were characterized by elemental, infrared (IR) and nuclear magnetic resonance (NMR) analyses.     

A least-squares support vector machine approach to predict temperature drop accompanying a given pressure drop for the natural gas production and processing systems

Precise estimation of temperature variations throughout gas production systems can enhance designing the production amenities. Routine methods for determining the temperature profiles in gas production systems are based on the gas composition and flash calculations. However, if the gas compositions are not available, the gas production system can be modelled by employing a black-oil approach, which is also a method for calculating the oil/gas resources and for modelling the gas reservoir operation. Accordingly, for black-oil models and when the natural gas compositions are not accessible, applying robust predictive tools in this research is of high interest in natural production systems. The current study places emphasis on applying the predictive model based on the least- squares support vector machine (LSSVM) to estimate precisely the proper temperature drop associated with a given pressure drop throughout the natural gas production systems based on the black-oil approach to acquire an accurate result for the temperature drop of natural gas streams. Genetic algorithm was used to optimise hyper-parameters (γ and σ²) which are embedded in the LSSVM model. Using this method is simple and it accurately determines the temperature drop through the natural gas stream with minimum uncertainty.