Growth of part-through thickness fatigue cracks in sheet polymethylmethacrylate

Fatigue growth data has been obtained for part-through thickness cracks in sheet specimens of polymethylmethacrylate subjected to cyclic tension. Statistical techniques are used to examine the usefulness of linear elastic fracture mechanics for correlating this part-through thickness crack growth data with throughthickness data published previously.     

Crack Healing in UO2

Isothermal annealing of thermally shocked UO₂ bars (O/M= 2.00 ±0.01) at 1600°, 1800°, and 2000°C caused crack healing, which was determined from recovery of room-temperature fracture strength. The activation energy for crack healing was ∼0.5 of that for volume diffusion, and healing occurred at the same rate as grain growth. This result has important implications with respect to crack healing in oxide fuels during in-reactor restructuring.     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

A farm level approach to define successful mitigation strategies for GHG emissions from ruminant livestock systems

Ruminant livestock systems are a significant source of greenhouse gases (GHGs). Thus far, mitigation options for GHG emissions mainly focused on a single gas, and are treated as isolated activities. The present paper proposes a framework for a farm level approach for the full accounting of GHG emissions. The methodology accounts for the relevant direct and indirect emissions of methane, nitrous oxide and carbon dioxide, including carbon sequestration. Furthermore, the potential trade-off with ammonia volatilisation and nitrate leaching are taken into account. A ruminant livestock farm is represented with a conceptual model consisting of five pools: animal, manure, soil, crop and feed. The carbon and nitrogen inputs, throughputs and outputs are described, and the direct emissions are related to the carbon and nitrogen flows. The indirect emissions included in the methodology are mainly carbon dioxide emissions from energy use and nitrous oxide emissions related to imported resources and nitrogen losses. The whole farm approach is illustrated with a case of two dairy farms with contrasting livestock density and grassland management. It is shown that the inclusion of carbon sequestration and all indirect emissions have a major impact on the GHG budget of the farm. For one farm, the effect of four mitigation options on the GHG emissions was quantified. It was concluded that a whole farm approach of full accounting contributes to a better insight in the interactions between the carbon and nitrogen flows and the resulting emissions, within and outside the farm boundaries. Consequently, the methodology can be used to develop efficient and effective mitigation strategies.     

Orientational crystallization and orientational drawing as strengthening methods for polyethylene

This paper reports on the theoretical and experimental studies of structure formation and strengthening (stiffening) of flexible-chain polymers. Two techniques of strengthening relying on the melt extrusion, i.e., orientational crystallization (crystallization initiated by melt extension) and drawing (uniaxial stretching of a crystallized polymer) are analysed by theory. The experiments involved preparation and study of melt extruded films and film fibers of linear polyethylene formed by the two techniques mentioned above. The effect of the degree of orientation and other parameters of the formation processes on the mechanical characteristics and the factors limiting the ultimate values of these characteristics are discussed. It is shown that multistage drawing succeeds in achieving a higher tensile strength and elastic modulus (1.2 and 35 GPa, respectively) than the orientational crystallization, which gives 0.8 and 15 GPa. The strengthening by drawing is accompanied by microcrack formation. In contrast, no discontinuities are observed in orientationally crystallized samples up to their ultimate extension.     

Factors influencing the formation of elongated morphologies in immiscible polymer blends during melt processing

The morphology of the dispersed phase in immiscible polymer blends plays an important role in the determination of the final physical properties. This paper considers factors that influence the final state of deformation of the dispersed phase, and in particular, the formation of fibers and lamellae. Blends of polyethylene and nylon-6 were extruded by ribbon extrusion at different draw ratios. Prior to single-screw extrusion the materials were blended in a co-rotating twin-screw extruder, and the size of the dispersed phase was studied as a function of the viscosity ratio. As the blends are extruded into ribbons and drawn through the calender rolls, the morphology of the dispersed phase undergoes drastic transformations. The fiber formation is enhanced by increasing the draw ratio. At high draw ratios, long thin fibers are observed. Some biaxial deformation is obtained for the noncompatibilized systems when the extruded materials enter the calender with the maximum closing pressure applied to the rolls. The same effect is observed for the compatibilized systems with lower values of the viscosity ratio. As a general rule, it has been observed that the final dispersed phase deformation is diminished in interfacially compatibilized systems.