Characterization of the intracellular GLUT-4 compartment

Learned behaviors and tolerance to ethanol can be maintained by peripheral injection of arginine8-vasopressin (vasopressin) under conditions in which they would otherwise be lost. However, the sites of this action in the brain have not been clearly identified. Using a polyclonal antibody raised against Fos and Fos-like proteins, we have demonstrated increases in immunoreactive Fos and Fos-like proteins in the suprachiasmatic, supraoptic and paraventricular nuclei of the hypothalamus, and lesser increases in piriform cortex and amygdala, of the rat 2 h after a s.c. injection of vasopressin. Our results suggest that the exogenous vasopressin may exert its central action by activating a cellular immediate early gene in specific brain regions.     

Oxygen Tracer Diffusion in Vitreous Silica

Oxygen diffusion in vitreous silica glass is studied using the gas exchange technique. The tracer concentration profiles are consistent with a model based on two mechanisms, one network and the other interstitial. These processes are coupled through limited network–interstitial exchange. Nuclear reaction analysis and secondary ion mass spectrometry techniques are performed and compared. These results are compared to experiments on transport in thin silica films grown on single-crystal silicon.     

Direct Vapor Pressure Measurement of Heatset Inks

Several types of ink are used in web offset printing. However, heatset inks predominate in general commercial work. In these inks, the vehicle consists of resin dissolved in a solvent, and drying takes place mainly by evaporation. In heatset web offset printing, the printed web is passed through dryers, which raise the temperature of the web enough to cause evaporation of the solvent. leaving only the resin to bind the pigment into a film and to the paper.

Since the solvents used in the heatset inks vary in boiling range from approximately 232° C to 316° C, and the solvent selected depends on the printing conditions, it is necessary to determine the vapor pressure values of heatset inks versus web temperatures for drying calculations. The isoteniscope method is limited to only the vapor pressure measurement of liquids. It cannot be used for materials such as heatset inks. To overcome this difficulty, an apparatus was designed and con- structed by TEC Systems for directly measuring the vapor pressure versus temperature of heatset inks from approximately 21°C to 316°C. In this paper, TEC's apparatus, test procedure developed, and typical test results for pure solvents and heatset inks will be described.     

Stability of everyday memory in age-associated memory impairment: A longitudinal study.

Everyday memory performance was examined longitudinally in 2 groups of Ss meeting the diagnostic criteria for age-associated memory impairment (AAMI). One group of 157 participants in a drug trial for reversing memory loss in AAMI was tested over multiple sessions. The other group of 75 persons did not participate in a drug trial and thus was tested only twice. Both groups were retested for longitudinal follow-up about 4 yrs after initial session. Follow-up test performance remained fairly stable relative to initial performance in both groups. The drug study group showed large practice effects during the course of the drug studies, but these effects subsided after the drug studies' end. Implications regarding memory decline in the normal elderly and neuropsychological measurement issues are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Guaranteeing serializable results in synchronous parallel production systems

To speed up production systems, researchers have studied how to execute many rules simultaneously. Unfortunately, such systems can yield results that are impossible for a serial system to produce, leading to erroneous behaviors. We present a formal solution to the problem of guaranteeing serializable behavior in synchronous parallel production systems that execute many rules simultaneously. We also present a variety of algorithms that implement this solution. Our framework builds upon the work of Ishida and Stolfo [14] and improves upon their solution. The practical advantages of these strategies are demonstrated with measurements from an initial implementation.     

On the performance of the CREL system

This paper presents the performance results of a comprehensive approach to the parallel execution of rule systems. It describes the semantics of a Concurrent Rule Execution Language, CREL, and the architecture of the system that compiles and executes CREL programs. The system has been designed to avoid run-time overhead by performing extensive compile-time analysis and by parallelizing compilation. Static dependency analysis, based on serializability, coupled with a set of optimizing transforms, partitions the program into subsets, called clusters. Clusters execute independently of each other and communicate though asynchronous message passing. At run time two additional sources of parallelism are exploited—run-time consistency checking allowing multiple rules to fire, and match-level parallelism. The CREL system is implemented on a Sequent Symmetry shared-memory computer. This paper presents the results of a factorial experiment that isolates and evaluates each source of parallelism in the CREL system and each possible combination of those methods. The results suggest that multiple-rule firing is the single most important source of parallelism in CREL programs and that the use of static dependency analysis based on serializability is instrumental to effectively exploit parallelism.     

The effect of high temperature plastic flow on the superconducting transition in A15 compounds

Low temperature heat capacity measurements have been made on hot isostatically pressed Nb₃Sn and arc cast, homogenized, and A15 transformation annealed V-23.3 at. pct Ga and V-18.1 at. pct Ga. The heat capacity measurements display the superconducting transition temperature (T _c), and have been used to evaluate the effects of plastic deformation on theT _c range. Plastic deformation to the extent of 15 pct compression at 1525 and 1650 °C does not alter the superconducting transition in polycrystalline Nb₃Sn. Plastic deformation to the extent of 15 pct compression at 1050 and 1200 °C does not alter the superconducting transition in polycrystalline V-23.3Ga, transformed to A15 structure with a fifty-hour 1150 °C anneal. The same statement can be made for A15 V-18.1Ga, deformed at 1050 °C after a fifty-hour, 1150 °C anneal. With onlyfive hours annealing at 1150 °C, A15 V-23.2Ga displays a lowering and broadening of theT _c range upon 1050 and 1200 °C plastic deformation. With onlyfive hours annealing at 1150 °C, A15 V-18.1Ga displays a broad, but increasedT _c range after plastic deformation at 1050 °C.     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

Methylaluminoxane/haloalkane as initiator system for styrene polymerization

Summary Styrene polymerization was initiated by methylaluminoxane in the presence of haloalkane. The propagating species are shown by trapping experiments and electron paramagnetic resonance to be both radicals and cations.