Capture of Airborne Particulate Using Surface Applied Emulsions: Potential for Postdetonation Dirty Bomb Cleanup

Recent research has proposed the use of asphalt and tall-oil-pitch emulsions for stabilizing radioactive contamination deposited on surfaces in urban areas. The objective of this project was to investigate whether surface applied emulsions could capture airborne radioactive particulate. Laboratory experiments included wind-blown particulate capture studies using an acrylic column and particulate retainment experiments using a wind box capable of producing wind speeds of 96?km/h. A probe methodology was developed to relate particulate retainment to a tack force on the emulsion surface. Experiments were also performed to determine the potential for such emulsions to absorb particulate matter into their emulsion matrix. Tall-oil-pitch emulsions outperformed asphalt emulsions in terms of particulate retention, tack force, and the ability to absorb magnesium silicate. Both tall-oil-pitch and asphalt emulsions were capable of extracting 22–24?g?m?2 of powder from particulate-laden airflow. Tall-oil-pitch emulsions were capable of retaining as much as 5–10% of magnesium silicate powder applied (i.e., retainment densities of 10–20?g?m?2) even after seven?days of curing and after applying 96.5?km/h (60?mph) wind. Tall-oil-pitch emulsions were able to absorb surface-applied magnesium silicate (approximately 0.1–0.2?g of magnesium silicate per 1.0?g of emulsion within three?days) into their emulsion matrix, preventing the magnesium silicate from being exposed to the external environment. Initial results with these five different emulsion formulations suggested particulate capture was feasible. Future emulsion formulations (i.e., longer curing times with greater acid concentrations) should be tested to optimize this postdetonation response strategy.     

Unicode Steganographic Exploits: Maintaining Enterprise Border Security

Unicode is rapidly becoming the preferred means for representing symbols used in creating multimedia content, especially for information that's presented in multiple languages. This article discusses a unicode vulnerability that makes such content susceptible to being used for creation of covert channel communications. We also developed a solution architecture, the unified secure message augmentation (USMA) service. The USMA service incorporates rules (in an XML vocabulary) that we can apply to unicode transmissions that will detect an attempt to transmit a potential exploit, alert network managers to the presence of the unicode anomaly, and take action to mitigate the exploit.     

Prevalence of weight reducing and weight gaining in adolescent girls and boys.

Surveyed the prevalence of weight reducing and weight gaining in 1,373 high school students. 63% of the girls and 16.2% of the boys reported being on weight-reducing regimens; 9.1% of the girls and 28.4% of the boys were trying to gain weight. Most female reducers and male gainers were already normal weight. Whites and Hispanics were more likely to be reducing, whereas Blacks were more likely to be gaining. Exercise and moderate caloric reduction were most popular for weight reducing, and a small but significant number were regularly using fasting, vomiting, laxatives, and appetite suppressants. The rate of weight reducing in female high school adolescents has increased significantly since similar surveys of American youths 20 yrs ago. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Numerical models of creep and boundary sliding mechanisms in single-phase, dual-phase, and fully lamellar titanium aluminide

Finite element simulations of the high-temperature behavior of single-phase γ, dual-phase α₂+γ, and fully lamellar (FL) α₂+γTiAl intermetallic alloy microstructures have been performed. Nonlinear viscous primary creep deformation is modeled in each phase based on published creep data. Models were also developed that incorporate grain boundary and lath boundary sliding in addition to the dislocation creep flow within each phase. Overall strain rates are compared to gain an understanding of the relative influence each of these localized deformation mechanisms has on the creep strength of the microstructures considered. Facet stress enhancement factors were also determined for the transverse grain facets in each model to examine the relative susceptibility to creep damage. The results indicate that a mechanism for unrestricted sliding of γ lath boundaries theorized by Hazzledine and co-workers leads to unrealistically high strain rates. However, the results also suggest that the greater creep strength observed experimentally for the lamellar microstructure is primarily due to inhibited former grain boundary sliding (GBS) in this microstructure compared to relatively unimpeded GBS in the equiaxed microstructures. The serrated nature of the former grain boundaries generally observed for lamellar TiAl alloys is consistent with this finding.     

Experimental peri-implant tissue breakdown around hydroxyapatite-coated implants

Factor V Leiden mutation was initially detected in thrombophilic patients and relatives by PCR RFLP (Restriction Fragment Length Polymorphism) according to Bertina (1). This technique presents some drawbacks and the current trend is to simplify the diagnosis. We describe a technique of Allele Specific Amplification (ASA) which is optimized in terms of reliability: an additional mismatch in antepenultimate position enables to obtain the same specificity as PCR RFLP. Furthermore, coamplification of internal control warrants an optimal sensitivity. All the PCR have been simplified: the DNA extraction improvement allows to analyse the genotype with only a few microliters of whole blood whatever the anticoagulant and the procedure of preservation (freezing, dried blood spots, storage at +4 degrees C for several days). This technique saves time. Moreover, full automation of the ASA technique may be shortened thanks to the lack of extraction and the positive/negative reading of the PCR signal.     

Implementing Employee Empowerment

The road to employee empowerment runs between true commitment on the one side and enforced compliance and chaos on the other. By following this column's guidelines, IS managers can steer their organizations to success and help free employees to be more creative in terms of both quality and productivity.     

Helical distributions of stokeslets

Helical distributions of stokeslets can valuably model microbial locomotion through a fluid, and also the flow field generated, wherever a flagellum actively executes helical undulations (as in many single-celled algae and protozoa) or where (as in many bacteria) the action of rotary motors causes a passive structure of helical shape (which may be a flagellum or else the cell body itself) to rotate. Here, previous biomechanical studies of such modes of locomotion are extended to include analyses of three-dimensional flow fields. In some cases, a rotlet field (curl of a stokeslet) needs to be incorporated in the models. For example, spirochete swimming is modelled by combined helical distributions of stokeslets and rotlets; the computed flow field being confined to within distances of less than twice the radius of the cell body's helical shape from its axis, while including a powerful jet-like interior flow through the coils of the swimming spirochete.     

Reinterpreting the basic theorem of flagellar hydrodynamics

Lorentz [1] pioneered the representation of flows at very low Reynolds number by a surface distribution of stokeslets — whose strengths, nowadays, are computed by surface-velocity collocations. That method is here compared with a representation widely used in flagellar hydrodynamics, by a curvilinear distribution of stokeslets and dipoles along the flagellar centreline; with the velocity of each cross-section expressed as a centreline value of the combined fields of singularities beyond a certain cutoff distance. The latter is also a good representation, and offers moreover some computational advantages. This paper establishes the equivalence of the two representations, and identifies those properties of Stokes flows which make both the dipoles and the cutoff essential to that equivalence.