In-Plane Cracking Behavior and Ultimate Strength for 2D Woven and Braided Melt-Infiltrated SiC/SiC Composites Tensile Loaded in Off-Axis Fiber Directions

The tensile mechanical properties of ceramic matrix composites (CMC) in directions off the primary axes of the reinforcing fibers are important for the architectural design of CMC components that are subjected to multiaxial stress states. In this study, two-dimensional (2D)-woven melt-infiltrated (MI) SiC/SiC composite panels with balanced fiber content in the 0° and 90° directions were tensile loaded in-plane in the 0° direction and at 45° to this direction. In addition, a 2D triaxially braided MI SiC/SiC composite panel with a higher fiber content in the ±67° bias directions compared with the axial direction was tensile loaded perpendicular to the axial direction tows (i.e., 23° from the bias fibers). Stress–strain behavior, acoustic emission, and optical microscopy were used to quantify stress-dependent matrix cracking and ultimate strength in the panels. It was observed that both off-axis-loaded panels displayed higher composite onset stresses for through-thickness matrix cracking than the 2D-woven 0/90 panels loaded in the primary 0° direction. These improvements for off-axis cracking strength can in part be attributed to higher effective fiber fractions in the loading direction, which in turn reduces internal stresses on weak regions in the architecture, e.g., minicomposite tows oriented normal to the loading direction and/or critical flaws in the matrix for a given composite stress. Both off-axis-oriented panels also showed relatively good ultimate tensile strength when compared with other off-axis-oriented composites in the literature, both on an absolute strength basis as well as when normalized by the average fiber strength within the composites. Initial implications are discussed for constituent and architecture design to improve the directional cracking of SiC/SiC CMC components with MI matrices.     

Polyether-metal salt complexes: 1. The elevation of the glass transition temperature of polyethers by metal salts

Various metal halides have been dispersed in high and low molecular weight, amorphous poly(propylene oxide), by solution blending techniques, to give single phase polymeric complexes which remained thermoplastic even at very high salt loadings. These complexes were amorphous and showed a single well-defined glass transition temperature (T_g) by differential thermal analysis with the T_g of the complex up to 140°C greater than the T_g of the parent polymer. The T_g elevation depended upon both the amount and the type of salt added and for a given salt the elevation followed a sigmoidal curve which levelled out at high salt concentrations. The T_g data have been interpreted in terms of a chelate ring model involving the co-ordination of two adjacent ether oxygen atoms in the polymer backbone to the salt. Using this model it was possible to consider the complex as a random copolymer consisting of complexed and uncomplexed monomer units. The contribution of crosslinking by metal salts to the elevation of T_g was assessed by studying poly(tetramethylene glycol)-zinc chloride complexes in which chelate formation is entropically unfavourable. Mechanical data are reported for ZnCl₂ complexes with high molecular weight poly(propylene oxide). The results indicate that ZnCl₂ increased the rubbery modulus and this has been interpreted in terms of ZnCl₂ forming a few, weak intermolecular crosslinks.     

Automatic and Efficient Human Pose Estimation for Sign Language Videos

We present a fully automatic arm and hand tracker that detects joint positions over continuous sign language video sequences of more than an hour in length. To achieve this, we make contributions in four areas: (i) we show that the overlaid signer can be separated from the background TV broadcast using co-segmentation over all frames with a layered model; (ii) we show that joint positions (shoulders, elbows, wrists) can be predicted per-frame using a random forest regressor given only this segmentation and a colour model; (iii) we show that the random forest can be trained from an existing semi-automatic, but computationally expensive, tracker; and, (iv) introduce an evaluator to assess whether the predicted joint positions are correct for each frame. The method is applied to 20 signing footage videos with changing background, challenging imaging conditions, and for different signers. Our framework outperforms the state-of-the-art long term tracker by Buehler et al. (International Journal of Computer Vision 95:180–197, 2011), does not require the manual annotation of that work, and, after automatic initialisation, performs tracking in real-time. We also achieve superior joint localisation results to those obtained using the pose estimation method of Yang and Ramanan  (Proceedings of the IEEE conference on computer vision and pattern recognition, 2011).     

Effects of a single dose of N-Acetyl-5-methoxytryptamine (Melatonin) and resistance exercise on the growth hormone/IGF-1 axis in young males and females

Melatonin and resistance exercise alone have been shown to increase the levels of growth hormone (GH). The purpose of this study was to determine the effects of ingestion of a single dose of melatonin and heavy resistance exercise on serum GH, somatostatin (SST), and other hormones of the GH/insulin-like growth factor 1 (IGF-1) axis. Physically active males (n = 30) and females (n = 30) were randomly assigned to ingest either a melatonin supplement at 0.5 mg or 5.0 mg, or 1.0 mg of dextrose placebo. After a baseline blood sample, participants ingested the supplement and underwent blood sampling every 15 min for 60 min, at which point they underwent a single bout of resistance exercise with the leg press for 7 sets of 7 reps at 85% 1-RM. After exercise, participants provided additional blood samples every 15 min for a total of 120 min. Serum free GH, SST, IGF-1, IGFBP-1, and IGFBP-3 were determined with ELISA. Data were evaluated as the peak pre- and post-exercise values subtracted from baseline and the delta values analyzed with separate three-way ANOVA (p < 0.05). In males, when compared to placebo, 5.0 mg melatonin caused GH to increase (p = 0.017) and SST to decrease prior to exercise (p = 0.031), whereas both 0.5 and 5.0 mg melatonin were greater than placebo after exercise (p = 0.045) and less than placebo for SST. No significant differences occurred for IGF-1; however, males were shown to have higher levels of IGFBP-1 independent of supplementation (p = 0.004). The 5.0 mg melatonin dose resulted in higher IGFBP-3 in males (p = 0.017). In conclusion, for males 5.0 mg melatonin appears to increase serum GH while concomitantly lowering SST levels; however, when combined with resistance exercise both melatonin doses positively impacts GH levels in a manner not entirely dependent on SST.     

Methods for the determination of cyclopropenoid fatty acids. VII. The dilution-HBr-titration technique as a general method

The stepwise HBr titration method for the cyclopropenoid analysis of cottonseed oils is subject to serious inaccuracies when applied to samples containing higher cyclopropenoid concentrations, particularly if they contain appreciable amounts of alumina-adsorbable materials. A modification of the method is described which eliminates these sources of error. Its validity has been established by the analysis of a wide range of synthetic compositions including compositions containing massive amounts of interfering HBr-reactive substances and other alumina-adsorbable materials. The method with further modification can be used to analyze glycerides with the same high degree of accuracy. Presented at the AOCS Meeting in Houston, April 1965. So. Utiliz. Res. Dev. Div., ARS, USDA.     

Chlorination of polystyrene

Chlorination of a low molecular weight polystyrene in the α position was studied by following changes in the infrared spectrum, glass transition temperature, and molecular weights of the polymer. The logarithm of the absorbance ratio at 2920 and 1500 cm^?1 as a function of mole per cent chlorination was linear. The glass transition temperatures, determined by use of a differential scanning calorimeter (DSC), were found to obey an equation developed by Dyvik for copolymers. The molecular weight of the chlorinated polystyrene decreased as a function of chlorination.     

An improved method for numerical solution of distillation processes

A new method for the numerical solution of a stagewise process is presented. The method consists of total linearization of all the equations in the distillation process, using the method of quasi-linearization. The resulting equations form a block-band matrix which can be readily solved by a method developed by the author. The method used for obtaining convergence is presented. The method has been tested for both binary and multi-component systems. The method has been compared with the Amundson-Pontinen method for a five component mixture. The method gives more rapid convergence. Numerical experiments indicate that the vapor and liquid flow rates are more stringent requirements than the bubble point.     

Studies on liver phosphatidyl cholines: I. Effects of fatty liver induction on phosphatidyl cholines from liver mitochondria and microsomes

Protein, total phospholipid, phosphatidyl cholines and phosphatidyl choline fractions from liver mitochondria and microsomes of female rats were analyzed after treatment with CCl₄ (0.3 ml of CCl₄ suspended in corn oil) or ethionine (50 mg in 0.9% saline) or after feeding a choline deficient, low protein diet for seven days. Phosphatidyl cholines were separated into four fractions differing in the degree of fatty acid unsaturation. Over 50% of total phosphatidyl choline phosphorus was present in fraction 3 of liver mitochondria and microsomes. The major fatty acid in fraction 1 was docosahexaenoic acid. Fraction 4 contains oleic and linoleic acids. Arachidonic acid occurs in fraction 2 and 3. Ethionine decreased the amount of microsomal protein and phosphatidyl choline fraction 1 of mitochondria. Microsomal protein was decreased by CCl₄. The choline deficient, low protein diet caused a decrease in mitochondrial and microsomal phospholipids. The amount of the mitochondrial phosphatidyl choline decreased. Corn oil increased the level of phosphatidyl choline fraction 3. Choline deficiency decreased the amount of phosphatidyl choline fraction 3, increased fraction 4 of mitochondria and microsomes and increased fraction 1 of microsomes.     

Viscosity and Thermal Expansion of Mixed-Alkali Borate Glasses

Transformation-range viscosity and thermal expansion measurements were made for five series (Li-Na, Li-K, Li-Cs, Na-Cs, and K-Rb) of mixed-alkali borate glasses containing 30 mol% total alkali oxide. In each case, negative deviations from additivity were observed in the isokom and glass transformation temperatures. Positive deviations from additivity were observed in the thermal expansion coefficients for the Li-Na, Li-K, and K-Rb glasses, while the Li-Cs and Na-Cs glasses exhibited negative deviations. Maximization of the deviation from additivity in the viscosity and glass transformation temperatures occurred when the radius ratio of the two alkali ions was approximately 1.7 to 1.8. Combination of the results of this study with those of earlier studies indicates that the deviations from additivity observed for these properties are independent of the identity of the glass former.