In situ mechanical testing of dry and hydrated breadcrumb in the environmental scanning electron microscope (ESEM)

The environmental scanning electron microscope (ESEM) has the ability to image both dry and hydrated materials, without the need for a conductive coating, unlike conventional SEM. This presents a unique opportunity to explore the structure and dynamic mechanical characteristics of food systems, including those in a moist state. We have developed a technique in which quantitative stress-strain relationships can be obtained whilst allowing simultaneous imaging, by ESEM, of the mechanical response of a sample. The results of in situ compression tests on dry and hydrated wheat flour breadcrumbs are presented and discussed. It was found that a maximum in the critical fracture stress occurred at intermediate moisture content (16%). ESEM micrographs demonstrate the differences in mechanical behaviour at three different moisture contents (nominally dry, 16% and 30%). Our findings suggest that 'voids' in cell walls, along with discontinuities between starch granules and gluten in the crumb, play an important role in fracture initiation. Further evidence shows that voids may be bridged by 'struts' and 'strings' of matrix material, which may be factors in the control of fracture propagation.     

Complete Analysis of STJ Detector Performance via Absorption of Phonon Pulses

For the first time a complete analysis of the tunnel and loss parameters of superconducting tunnel junction photon detectors has been made solely by the use of nanosecond phonon pulse excitation. Previously only a partial characterization, requiring supplementary information from photo-excitation measurements, was possible. The present results have been achieved by a more realistic model for the energy spectrum of the phonon pulses and greatly improved (nanosecond) time resolution of the detected signal. The value determined for the tunnel rate is in good agreement with calculations based on the device layer structure. It is believed that the relatively high values of loss time obtained are the result of trap-enhanced recombination due to the high quasiparticle densities attained in the experiments.      

Cross-thickness vibration welding of polycarbonate,polyetherimide, poly(butylene terephthalate), and modified polyphenylene oxide

In vibration welding of thermoplastics, frictional heat generated by vibrating two parts under pressure, along their common interface, is used to effect welds. In the normal, well-understood mode, the vibratory motion is along the weld seam, which is at right angles to the thickness direction for straight boundaries. But in many applications, such as in the welding of closed seams of box-like parts, this vibratory motion occurs in the part-thickness direction, so that a portion of the molten layer along the seam is exposed to the ambient air during each vibratory cycle. The resulting reduction in temperature can affect weld quality. The process phenomenology and the weld strengths of such cross-thickness vibration-welded butt joints are investigated for four neat resins. Weld amplitudes and weld pressures are shown to affect the strengths of 120-Hz welds differently. It is shown that strengths on the order of the strengths of the neat resins can be achieved in 250-Hz butt welds.     

Fluoxetine tenth anniversary update: the progress continues

This tenth anniversary review/update of fluoxetine concentrates on the past 5 years of its clinical application. The mechanism of action of fluoxetine; its metabolism; its efficacy in patients with various diagnostic subgroups of depression, patients with coincident medical disease, children and adolescents with depression, patients with eating disorders, and patients with obsessive-compulsive disorder (OCD); its long-term (maintenance) efficacy; its side effects and toxicity; and pharmacoeconomic considerations are reviewed. Pharmacotherapy is currently the only proven method for treating major depressive disorder that is applicable to all levels of severity of major depressive illness. Since its introduction 10 years ago, fluoxetine has been available to psychiatrists, primary care physicians, and other nonpsychiatric physicians as full-dose effective pharmacotherapy for patients with depression. Fluoxetine has been widely prescribed by physicians knowledgeable in pharmacology and in the treatment of depression because of its proven efficacy (ie, equal to that of tricyclic antidepressants [TCAs]), its ease of administration (with full therapeutic dosing usually starting from day 1), its generally benign side-effect profile, its remarkable safety in over-dose, and its proven effectiveness in the most common depressed patient population--anxious, agitated, depressed patients--as well as in patients with various subtypes and severities of depression. In more recent years it has also proved effective in the treatment of bulimia, an entity for which only limited or inadequate treatment options had been previously available. In OCD, fluoxetine, with its more acceptable side-effect profile and greater ease of dosing, presents a favorable alternative to previous drug therapy and is useful in treating both obsessions and compulsions. Fluoxetine is currently recognized among clinicians as efficacious in treating anxiety disorders and is being used successfully in special depressed populations such as patients with medical comorbidity, elderly patients, adolescents, and children. Rapid discontinuation or missed doses of short-half-life selective serotonin reuptake inhibitors, TCAs, and heterocyclic antidepressants are associated with withdrawal symptoms of a somatic and psychological nature, which cannot only be disruptive, but can also be suggestive of relapse or recurrence of depression. In striking contrast to these short-half-life antidepressants, fluoxetine is rarely associated with such sequelae on sudden discontinuation or missed doses. This preventive effect against withdrawal symptoms on discontinuation of fluoxetine is attributed to the unique extended half-life of this antidepressant. Current studies show that the overall increased effectiveness of fluoxetine in treating depression compensates for its higher cost, compared with older drugs, by reducing the need for physician contact because of increased compliance and less need of titration, and by reducing premature patient discontinuation, thereby yielding fewer relapses, less recurrence, and less reutilization of mental health services.     

Attracting and Keeping it Talent

In these times of a tight IT labor market, talented IT workers enjoy a mobility previously not experienced. Better offers constantly come their way, and often they accept these offers and leave behind frustrated and betrayed IS managers. the reasons that IT professionals choose to work for an organization or leave it for another vary as much as these professionals' skills and personalities and organizations' cultures and IT functions. Trying to establish a match between an organization's goals and functions and an IT professional's goals and needs will help IT managers hire and keep the IT talent they need.     

Lubrication properties of non-adsorbing polymer solutions in soft elastohydrodynamic (EHD) contacts

The in-use performance and processing of many consumer products in the food, home and personal care industries are dependent on their tribological properties. A major component of these products is often a high molecular weight polymer, which is typically used to thicken aqueous systems. Polymer solutions tend to be non-Newtonian, and in particular their viscosity varies with shear rate, such that it is difficult to predict their friction or hydrodynamic film-forming behaviour. The present work relates the tribology of aqueous polymer solutions to their rheological properties in thin films in ‘soft’ contacts at high shear rates. The friction properties of three types of polymers in aqueous solution, polyethylene oxide, PEO; xanthan gum, XG; and guar gum, GG, have been studied as a function of polymer concentration over a wide range of entrainment speeds in a point contact formed between silicone rubber and steel. This has enabled the boundary lubrication and isoviscous-elastic lubrication properties of the solutions to be investigated using both hydrophilic and hydrophobic silicone surfaces.It is found that the friction vs. entrainment speed dependence follows the shape of a classical Stribeck curve. In general, a lower friction is observed with increasing polymer concentration in the mixed-regime. Using scaling factors for the entrainment speed, we have shown that this decrease in friction is likely to be due to viscous effects and that the scaling factors represent effective high shear rate viscosities. In the case of PEO and XG, and GG at low concentrations, a good correlation is found between this effective viscosity and the apparent viscosity measured at the highest shear rates attainable with the available rheometer. However, for GG at concentrations above 0.2%, the effective viscosity decreases with increasing polymer content.The three polymers do not significantly reduce friction in the boundary regime and in general give essentially the same response as water when an effective viscosity is taken into account. However, a slight increase in friction in comparison to pure water has been observed for XG and GG on hydrophobic surfaces. It is suspected that this may be due to a blocking of fluid entrainment, or possibly exclusion of polymer from the contact, due to the large hydrodynamic volume and rigid nature of the two biopolymers. Finally, for PEO solutions with full-film elastohydrodynamic conditions were reached, the measured friction coefficient of the film correlated quite well with the value calculated from the effective viscosity.