A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques

Short setup time is an essential element for the effective implementation of many lean pillars, i.e., JIT, and Kanban. Most of the current setup reduction methodologies are based on Shingo’s Single Minute Exchange of Dies (SMED) that suggests the conversion of internal setup operations to external operations. However, the conventional SMED approach – as proposed by Shingo – does not possess a systematic approach to accomplish this conversion. Thus, a new approach is proposed in order to aid the process engineers in implementing SMED. The proposed approach is based on the conventional SMED, but also it incorporates Multiple Criteria Decision-Making Techniques (MCDM) to the third implementation phase. The MCDM techniques used in this work are Analytical Hierarchal Process (AHP), Preference Selection Index (PSI) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The proposed approach provides a systematic procedure for selecting the best setup technique among the available alternatives, and takes also into consideration other factors that affect the decision-making process; including: cost, energy, facility layout, safety, life, quality and maintenance. A real example of PVC industry is used to exemplify the approach. The results demonstrate the capability of the proposed approach in setup time reduction, which in turn will improve machines’ utilization, and increase the productivity and flexibility of the whole facility.     

Production of in situ aluminum-titanium diboride master alloy formed by slag-metal reaction

Al-TiB₂ master alloys have received much attention in recent years owing to their potential as efficient grain refiners for aluminum foundry alloys. In this study, the process of production of master alloys was investigated to develop a low cost method, namely, slag-metal reaction. This method can be used to fabricate Al-TiB₂ master alloy in situ from the TiO₂-H₃BO₃-Na₃AlF₆ and Al system. Since the price of the raw materials is low and the technology is simple, the processing technique appears to reduce the cost of the master alloy. Because of exothermic reactions, not much energy is needed to melt materials. In this process, Titanium diboride particles were formed in situ through the reactions of TiO₂, H₃BO₃ and Na₃AlF₆. Results showed that when the aluminum melted, the condensed TiB₂ particles that formed in situ were spherical with an average diameter of 1 μm. Furthermore, these TiB₂ particles were distributed uniformly through the master alloy.     

Investigation of structural and optoelectronic properties of BaThO3

Structural and optoelectronic properties of BaThO₃ cubic perovskite are calculated using all electrons full potential linearized augmented plane wave (FP-LAPW) method. Wide and direct band gap, 5.7 eV, of the compound predicts that it can be effectively used in UV based optoelectronic devices. Different characteristic peaks in the wide UV range emerges mainly due to the transition of electrons between valance band state O-p and conduction band states Ba-d, Ba-f, Th-f and Th-d.     

Multidimensional vector radix FHT algorithms

In this paper, efficient multidimensional (M-D) vector radix (VR) decimation-in-frequency and decimation-in-time fast Hartley transform (FHT) algorithms are derived for computing the discrete Hartley transform (DHT) of any dimension using an appropriate index mapping and the Kronecker product. The proposed algorithms are more effective and highly suitable for hardware and software implementations compared to all existing M-D FHT algorithms that are derived for the computation of the DHT of any dimension. The butterflies of the proposed algorithms are based on simple closed-form expressions that allow easy implementations of these algorithms for any dimension. In addition, the proposed algorithms possess properties such as high regularity, simplicity and in-place computation that are highly desirable for software and hardware implementations, especially for the M-D applications. A close relationship between the M-D VR complex-valued fast Fourier transform algorithms and the proposed M-D VR FHT algorithms is established. This type of relationship is of great significance for software and hardware implementations of the algorithms, since it is shown that because of this relationship and the fact that the DHT is an alternative to the discrete Fourier transform (DFT) for real data, a single module with a little or no modification can be used to carry out the forward and inverse M-D DFTs for real- or complex-valued data and M-D DHTs. Thus, the same module (with a little or no modification) can be used to cover all domains of applications that involve the DFTs or DHTs.     

Queue length‐based load balancing in data center networks

Traffic load balancing in data centers is an important requirement. Traffic dynamics and possibilities of changes in the topology (e.g., failures and asymmetries) make load balancing a challenging task. Existing end‐host–based schemes either employ the predominantly used ECN or combine it with RTT to get congestion information of paths. Both congestion signals, ECN and RTT, have limitations; ECN only tells whether the queue length is above or below a threshold value but does not inform about the extent of congestion; similarly, RTT in data center networks is on the scale of up to few hundreds of microseconds, and current data center operating systems lack fine‐grained microsecond‐level timers. Therefore, there is a need of a new congestion signal which should give accurate information of congestion along the path. Furthermore, in end‐host–based schemes, detecting asymmetries in the topology is challenging due to the inability to accurately measure RTT on the scale of microseconds. This paper presents QLLB, an end‐host–based, queue length–based load balancing scheme. QLLB employs a new queue length–based congestion signal that gives an exact measure of congestion along the paths. Furthermore, QLLB uses relative‐RTT to detect asymmetries in the topology. QLLB is implemented in ns‐3 and compared with ECMP, CONGA, and Hermes. The results show that QLLB significantly improves performance of short flows over the other schemes and performs within acceptable level, of CONGA and Hermes, for long flows. In addition, QLLB effectively detects asymmetric paths and performs better than Hermes under high loads.     

SCM: Secure and accountable TLS certificate management

In classical public‐key infrastructure (PKI), the certificate authorities (CAs) are fully trusted, and the security of the PKI relies on the trustworthiness of the CAs. However, recent failures and compromises of CAs showed that if a CA is corrupted, fake certificates may be issued, and the security of clients will be at risk. As emerging solutions, blockchain‐ and log‐based PKI proposals potentially solved the shortcomings of the PKI, in particular, eliminating the weakest link security and providing a rapid remedy to CAs' problems. Nevertheless, log‐based PKIs are still exposed to split‐world attacks if the attacker is capable of presenting two distinct signed versions of the log to the targeted victim(s), while the blockchain‐based PKIs have scaling and high‐cost issues to be overcome. To address these problems, this paper presents a secure and accountable transport layer security (TLS) certificate management (SCM), which is a next‐generation PKI framework. It combines the two emerging architectures, introducing novel mechanisms, and makes CAs and log servers accountable to domain owners. In SCM, CA‐signed domain certificates are stored in log servers, while the management of CAs and log servers is handed over to a group of domain owners, which is conducted on the blockchain platform. Different from existing blockchain‐based PKI proposals, SCM decreases the storage cost of blockchain from several hundreds of GB to only hundreds of megabytes. Finally, we analyze the security and performance of SCM and compare SCM with previous blockchain‐ and log‐based PKI schemes.     

Inter-cell interference in multi-tier heterogeneous cellular networks: modeling and constraints

Telecommunication Systems - Interference is the main source of capacity limitation in wireless networks. In some medium access technologies in cellular networks, such as OFDMA, the allocation of...     

Modeling and Simulation for Transient Thermal Analyses Using a Voltage-in-Current Latency Insertion Method

This article presents a modeling and simulation method for transient thermal analyses of integrated circuits(ICs) using the original and voltage-in-current(VinC) latency insertion method(LIM). LIM-based algorithms are a set of fast transient simulation methods that solve electrical circuits in a leapfrog updating manner without relying on large matrix operations used in conventional Simulation Program with Integrated Circuit Emphasis(SPICE)-based methods which can significantly slow down the sol...     

Improved aquila optimization-based parameter evaluation framework and meta-heuristic algorithm in radio-over-fiber SpatialMux multi-input multi-output long-term evolution system

In heterogeneous access network, Multiple-Input Multiple-Output (MIMO) radio-over-fiber (RoF) system is an efficient approach for multiple signal transmission with low cost and complexity. The performance of RoF fronthaul system in MIMO system will be varied with different nonlinear effects. By adjusting various transmission parameters, such as the input signal power or the laser bias current, the nonlinear impacts produced by the RoF system can be reduced. In this paper, a novel algorithm Improved Aquila Optimization (IAO) is proposed to optimize transmission circumstances of MIMO RoF system. It determines the appropriate bias current for both lasers and Radio Frequency (RF) signal power in a short period. The input signals are wavelength multiplexed with Intensity Modulation and Direct Detection (IM/DD) applied. The carrier as well as transmission frequency is governed by the MIMO-Long-Term Evolution (LTE) standard. The proposed system is implemented in MATLAB, and the performance is evaluated. The experimental results show that fast convergence and trade-off between noise and nonlinearity are obtained with varying bandwidth. In the experimental scenario, the maximum Error Vector Magnitude (EVM) of 1.88, 3.14, and signal-to-noise ratio (SNR) of 3.204, and 2.698 was attained for both quadrature phase shift keying (QPSK) and quadrature amplitude modulation (QAM) modulation. [Correction added on 24 April 2023, after first online publication: the SNR values were corrected in the preceding sentence.] For 100 iterations, the processing time was reduced to 0.137 s. When compared with the conventional state-of-the-art approaches, the accuracy and computational complexity of the proposed approach are improved.