On the operational and manufacturing tolerances of GaAs-AlAs MQWmodulators

We approach the question of optimization of surface-normal p-i(multiquantum-well, MQW)-n modulators from the viewpoint of investigating their tolerance to variations in wavelength and temperature and errors in manufacture. The reflection characteristics of two high-quality samples are carefully processed to eliminate Fabry-Perot fringes, and then their spectra at any bias are characterized with six phenomenological parameters which depend on λ₀, the zero-field exciton position. The two GaAs-AlAs samples have λ₀'s of 833.8 and 842.3 nm, and so cover a range useful for modulators designed to operate near 850 nm in the normally reflecting condition, i.e., reflection decreases with field. A linear interpolation of the parameters of these two samples is used to predict the behavior of MQW diodes with λ₀'s around this range, and so a fully comprehensive examination of normally reflecting MQW modulators is performed. The performance aspect that is examined is contrast ratio as a function of nonuniformities in the devices or operating conditions given a voltage swing of 3 V. There are two operational modes discussed. If the voltage offset of the bias is allowed to vary via a feedback circuit, a contrast of 2:1 may be maintained over an operating wavelength change (Δλ) of 17 nm with local variations of wavelength of ±1 nm, which corresponds to a temperature variation of 60°C while allowing for variations of laser driver wavelength of ±1 nm. If feedback Is not permitted, we determine that, given tolerances to manufacturing errors, a contrast of 1.5:1 may be maintained over a wavelength range of ~5 nm by either using stacked diode designs or extremely shallow quantum wells     

Design rules for an integratable low-power amplifier/filter combination

In this paper design rules for a circuit topology in which there is an inseparable combination of an amplifier and a filter characteristic, are presented. By intentionally using the capacitance of an already present input sensor for the filtering, the total required integrated capacitance is much less than that in circuits, which have a separately designed amplifier and filter function. Consequently, it is possible to have the advantage of a better integratability. Moreover, less complexity in the design is achieved. The presented circuit shows a current-to-voltage conversion and an inherently controllable second-order low-pass filter characteristic. A discrete realization has been designed to test the circuit. This circuit operates down to a 1 V supply voltage and the transfer shows a 1.8 M currentto-voltage conversion with a bandwidth of 6 kHz. Measurement results of this circuit show that a 63 dB dynamic range can be achieved with a total required integrated capacitance of only 31 pF.     

New approaches for household energy conservation—In search of personal household energy budgets and energy reduction options

Large-scale energy reduction campaigns focusing on households generally have two shortcomings. First, an energy reduction campaign is either personalized but time intensive or time extensive but generalized. Second, because only the direct energy requirements are addressed, only 50% of the total household energy requirement is subject to reduction. The other 50%, the indirect energy requirement, is much more difficult to calculate and address and therefore not subject to reduction.

In this paper, we describe a web-based tool that has the potential to overcome both of these shortcomings. The tool addresses direct as well as indirect energy requirements. By means of a simple expert system participants obtain personalized reduction options and feedback on the energy reduced. The tool was tested in Groningen (the Netherlands) with a sample of 300 households, resulting in a direct energy reduction of about 8.5% compared to a control group. The reduction in indirect energy was not statistically significant.     

High‐Efficiency InP‐Based Photocathode for Hydrogen Production by Interface Energetics Design and Photon Management

The solar energy conversion efficiency of photoelectrochemical (PEC) devices is usually limited by poor interface energetics, limiting the onset potential, and light reflection losses. Here, a three‐pronged approach to obtain excellent performance of an InP‐based photoelectrode for water reduction is presented. First, a buried p–n⁺ junction is fabricated, which shifts the valence band edge favorably with respect to the hydrogen redox potential. Photoelectron spectroscopy substantiates that the shift of the surface photovoltage is mainly determined by the buried junction. Second, a periodic array of InP nanopillars is created at the surface of the photoelectrode to substantially reduce the optical reflection losses. This device displays an unprecedented photocathodic power‐saved efficiency of 15.8% for single junction water reduction. Third, a thin TiO₂ protection layer significantly increases the stability of the InP‐based photoelectrode. Careful design of the interface energetics based on surface photovoltage spectroscopy allows obtaining a PEC cell with stable record performance in water reduction.     

Effect of length on the fundamental resonance frequency of arterial models having radial dilatation

The pressure wave moving along an elastic artery filled with blood was examined as a moving Windkessel having a natural oscillation angular frequency nu 0 and a damping coefficient b. The radial directional motion for an element of the wall segment and the adherent fluid was considered. This equation was solved with conditions at both ends of an artery of length L. An external impulse force was applied at one end and a static pressure Po at the other. Analytic solution allowed only certain oscillation modes of resonance frequencies fn, where fn2 = a + cnL-2 with [formula: see text] and V infinity is the high frequency phase velocity. The relationship between f0 and L was examined experimentally for tubes constructed of latex, rubber, or dissected aorta. The effect of raising the static pressure P0 or increasing the tension in the tube was consistent with the prediction. The hypertension that accompanies an augmentation in arterial wall and the association between the heart rate and the mean blood pressure were discussed.     

Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

A unified approach to superresolution and multichannel blind deconvolution.

This paper presents a new approach to the blind deconvolution and superresolution problem of multiple degraded low-resolution frames of the original scene. We do not assume any prior information about the shape of degradation blurs. The proposed approach consists of building a regularized energy function and minimizing it with respect to the original image and blurs, where regularization is carried out in both the image and blur domains. The image regularization based on variational principles maintains stable performance under severe noise corruption. The blur regularization guarantees consistency of the solution by exploiting differences among the acquired low-resolution images. Several experiments on synthetic and real data illustrate the robustness and utilization of the proposed technique in real applications.     

Standby supply voltage minimization for deep sub-micron SRAM

Suppressing the leakage current in memories is critical in low-power design. By reducing the standby supply voltage (V_DD) to its limit, which is the data retention voltage (DRV), leakage power can be substantially reduced. This paper models the DRV of a standard low leakage SRAM module as a function of process and design parameters, and analyzes the SRAM cell stability when V_DD approaches DRV. The DRV model is verified using simulations as well as measurements from a 4 KB SRAM chip in a 0.13 μm technology. Due to a large on-chip variation, DRV of the 4 KB SRAM module ranges between 60 and 390 mV. Measurements taken at 100 mV above the worst-case DRV show that reducing the SRAM standby V_DD to a safe level of 490 mV saves 85% leakage power. Further savings can be achieved by applying DRV-aware SRAM optimization techniques, which are discussed at the end of this paper.     

The Role of Test Protocols in Automated Test Generation for Embedded-Core-Based System ICs

Modular testing is an attractive approach to testing large system ICs, especially if they are built from pre-designed reusable embedded cores. This paper describes an automated modular test development approach. The basis of this approach is that a core or module test is dissected into a test protocol and a test pattern list. A test protocol describes in detail how to apply one test pattern to the core, while abstracting from the specific test pattern stimulus and response values. Subsequent automation tasks, such as the expansion from core-level tests to system-chip-level tests and test scheduling, all work on test protocols, thereby greatly reducing the amount of compute time and data involved. Finally, an SOC-level test is assembled from the expanded and scheduled test protocols and the (so far untouched) test patterns. This paper describes and formalizes the notion of test protocols and the algorithms for test protocol expansion and scheduling. A running example is featured throughout the paper. We also elaborate on the industrial usage of the concepts described.