Fabrication, Microstructural Characterization, and Mechanical Properties of Polycrystalline t'-Zirconia

Large-grained (100- to 200-μm), yttria-doped, polycrystalline t '-zirconia ceramics were fabricated by heat-treating presintered samples at temperatures 2100°C. Polarized light microscopy revealed the ferroelastic domain structure in the t ' samples. XRD showed that no monoclinic phase was detected on as-polished, ground and fracture surfaces, or on surfaces while under a tensile stress as high as 400 MPa. By contrast, relative changes occurred in the tetragonal peak intensities, which were attributed to ferroelasatic domain switching. The higher toughness of 3-mol%-Y₂O₃-doped t ' samples (7.7 MPa · m^1/2) compared to that of 8 mol% Y₂O₃ cubic samples (2.4 MPa · m^1/2) was explained in part by ferroelastic domain switching.     

Grinding-Induced Texture in Ferroelastic Tetragonal Zirconia

Ceria- and yttria-doped tetragonal polycrystalline zirconia ceramics were ground at temperatures as high as 1100°C. X-ray diffraction revealed that the intensity ratio I ₍₀₀₂₎/ I ₍₂₀₀₎ increased (to as high as ∼4.5) compared with that from the as-sintered surfaces (∼0.55). The enhancement in I ₍₀₀₂₎/ I ₍₂₀₀₎ at temperatures well above the m → t transition temperature shows that it is not related to transformation, reversible or otherwise, but can be explained by ferroelastic domain switching.     

An augmented reality system for patient-specific guidance of cardiac catheter ablation procedures

We present a system to assist in the treatment of cardiac arrhythmias by catheter ablation. A patient-specific three-dimensional (3-D) anatomical model, constructed from magnetic resonance images, is merged with fluoroscopic images in an augmented reality environment that enables the transfer of electrocardiography (ECG) measurements and cardiac activation times onto the model. Accurate mapping is realized through the combination of: a new calibration technique, adapted to catheter guided treatments; a visual matching registration technique, allowing the electrophysiologist to align the model with contrast-enhanced images; and the use of virtual catheters, which enable the annotation of multiple ECG measurements on the model. These annotations can be visualized by color coding on the patient model. We provide an accuracy analysis of each of these components independently. Based on simulation and experiments, we determined a segmentation error of 0.6 mm, a calibration error in the order of 1 mm and a target registration error of 1.04 +/- 0.45 mm. The system provides a 3-D visualization of the cardiac activation pattern which may facilitate and improve diagnosis and treatment of the arrhytmia. Because of its low cost and similar advantages we believe our approach can compete with existing commercial solutions, which rely on dedicated hardware and costly catheters. We provide qualitative results of the first clinical use of the system in 11 ablation procedures.     

Thermoelectric Effect Spectroscopy and Photoluminescence of High-Resistivity CdTe:In

Thermoelectric effect spectroscopy and photoluminescence techniques were used to study the defect levels in samples from three crystals of CdTe:In grown by the vertical gradient freeze method. The main goal of the investigation was to study defects, which strongly trap charge carriers or act as recombination centers in order to eliminate them from the technological process. The main difference among detecting and non-detecting samples was the absence of electron traps with a very high capture cross-section and energy 0.6 eV to 0.7 eV, which act as lifetime killers even at low concentrations. Recently published ab initio calculations show a complex of Te antisite and Cd vacancy within this energy range.     

Efficient disparity vector prediction schemes with modified P frame for 2D camera arrays

An efficient disparity estimation algorithm for multi-view video sequences, recorded by a two-dimensional camera array in which the cameras are spaced equidistantly, is presented. Because of the strong geometrical relationship among views, the disparity vectors of a certain view can for most blocks be derived from the disparity vectors of other views. A frame constructed using that idea is called a D frame in this work. Three new prediction schemes which contain D frames are proposed for encoding 5 × 3 multi-view video sequences. The schemes are applied to several multi-view image sequences taken from a camera-array and they are compared in terms of quality, bit-rate and complexity. The experimental results show that the proposed prediction schemes significantly decrease the complexity of the encoder at a very low cost of quality and/or bit-rate.     

Two-dimensional analysis of proteins secreted by Saccharomyces cerevisiae regenerating protoplasts: a novel approach to study the cell wall

Protoplasts of Saccharomyces cerevisiae incubated in regenerating conditions secrete cell wall components in order to allow the biosynthesis of this structure. During the first hours of incubation, many of these are not retained in the forming cell wall but remain in the medium. We have developed a method for collecting the secreted proteins and have analysed these by two-dimensional electrophoresis to obtain a reference map of putative cell wall proteins. Several proteins were identified by microsequencing or immunoblotting; namely, cell wall hydrolytic enzymes, heat shock proteins, glycolytic enzymes and others. Some beta-1,3- and beta-1, 6-glucosylation was detected in the proteins secreted by regenerating protoplasts.     

In vivo measurement of the brain and skull resistivities using an EIT-based method and realistic models for the head

In vivo measurements of equivalent resistivities of skull (rho(skull)) and brain (rho(brain)) are performed for six subjects using an electric impedance tomography (EIT)-based method and realistic models for the head. The classical boundary element method (BEM) formulation for EIT is very time consuming. However, the application of the Sherman-Morrison formula reduces the computation time by a factor of 5. Using an optimal point distribution in the BEM model to optimize its accuracy, decreasing systematic errors of numerical origin, is important because cost functions are shallow. Results demonstrate that rho(skull)/rho(brain) is more likely to be within 20 and 50 rather than equal to the commonly accepted value of 80. The variation in rho(brain)(average = 301 omega x cm, SD = 13%) and rho(skull)(average = 12230 omega x cm, SD = 18%) is decreased by half, when compared with the results using the sphere model, showing that the correction for geometry errors is essential to obtain realistic estimations. However, a factor of 2.4 may still exist between values of rho(skull)/rho(brain) corresponding to different subjects. Earlier results show the necessity of calibrating rho(brain) and rho(skull) by measuring them in vivo for each subject, in order to decrease errors associated with the electroencephalogram inverse problem. We show that the proposed method is suited to this goal.     

改革模拟实验教学和考试方法的尝试

模拟电子线路实验课对于电子线路教学改革和提高学生的工程实践能力具有重要作用。本文阐述了模拟实验课单独设课后教学及考试方法的改革尝试以及教学体会和教学效果。     

A 640 by 480 Pixels Readout Circuit for IR Imaging

A readout circuit for a 640 × 480 pixels FPA (focal plane array) has been successfully designed, fabricated and tested. The circuit solution is based on a per pixel source-follower direct injection (SFDI) pre-amplifier. Signal multiplexing is performed in both X and Y direction. The pixel size is 25 m × 25m. The chip is optimized for a QWIP (quantum well infrared photodetector) operating at a temperature of 70 K. The circuit has been realized in a standard 0.8 m CMOS process.